| Message ID | 20230314225535.1321736-2-sre@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add DT support for generic ADC battery | expand |
On 3/15/23 00:55, Sebastian Reichel wrote: > Add binding for a battery that is only monitored via ADC > channels and simple status GPIOs. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> > --- > .../bindings/power/supply/adc-battery.yaml | 70 +++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/adc-battery.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/adc-battery.yaml b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml > new file mode 100644 > index 000000000000..ed9702caedff > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml > @@ -0,0 +1,70 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ADC battery > + > +maintainers: > + - Sebastian Reichel <sre@kernel.org> > + > +description: > + Basic battery capacity meter, which only reports basic battery data > + via ADC channels and optionally indicate that the battery is full by > + polling a GPIO line. > + > + The voltage is expected to be measured between the battery terminals > + and mandatory. The optional current/power channel is expected to > + monitor the current/power flowing out of the battery. Last but not > + least the temperature channel is supposed to measure the battery > + temperature. This looks very good to me. Even I fell under the illusion I know what these bindings mean and how the hardware looks like ;) I am terrible with the bindings syntax so this is not worth much but: Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Yours, -- Matti
On 14/03/2023 23:55, Sebastian Reichel wrote: > Add binding for a battery that is only monitored via ADC > channels and simple status GPIOs. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Tue, Mar 14, 2023 at 11:55 PM Sebastian Reichel <sre@kernel.org> wrote: > Add binding for a battery that is only monitored via ADC > channels and simple status GPIOs. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/power/supply/adc-battery.yaml b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml new file mode 100644 index 000000000000..ed9702caedff --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC battery + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: + Basic battery capacity meter, which only reports basic battery data + via ADC channels and optionally indicate that the battery is full by + polling a GPIO line. + + The voltage is expected to be measured between the battery terminals + and mandatory. The optional current/power channel is expected to + monitor the current/power flowing out of the battery. Last but not + least the temperature channel is supposed to measure the battery + temperature. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: adc-battery + + charged-gpios: + description: + GPIO which signals that the battery is fully charged. The GPIO is + often provided by charger ICs, that are not software controllable. + maxItems: 1 + + io-channels: + minItems: 1 + maxItems: 4 + + io-channel-names: + minItems: 1 + items: + - const: voltage + - enum: [ current, power, temperature ] + - enum: [ power, temperature ] + - const: temperature + + monitored-battery: true + +required: + - compatible + - io-channels + - io-channel-names + - monitored-battery + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + fuel-gauge { + compatible = "adc-battery"; + charged-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + io-channels = <&adc 13>, <&adc 37>; + io-channel-names = "voltage", "current"; + + power-supplies = <&charger>; + monitored-battery = <&battery>; + };
Add binding for a battery that is only monitored via ADC channels and simple status GPIOs. Signed-off-by: Sebastian Reichel <sre@kernel.org> --- .../bindings/power/supply/adc-battery.yaml | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/adc-battery.yaml