| Message ID | 20230315212814.15908-2-henrik@grimler.se (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: add mmc aliases for Exynos devices | expand |
On 15.03.2023 22:28, Henrik Grimler wrote: > Previously, the mshc0 alias has been necessary so that > MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA are set for mshc_0/mmc_0. > However, these capabilities should be described in the device tree so > that we do not have to rely on the alias. > > The property mmc-ddr-1_8v replaces MMC_CAP_1_8V_DDR, while bus_width = > <8>, which is already set for all the mshc0/mmc0 nodes, replaces > MMC_CAP_8_BIT_DATA. > > Also drop other mshc aliases as they are not needed. > > Signed-off-by: Henrik Grimler <henrik@grimler.se> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > ... Best regards
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index f54f30633417..868f7b98a637 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -40,8 +40,6 @@ aliases { spi2 = &spi_2; spi3 = &spi_3; spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; }; chosen { @@ -952,6 +950,7 @@ &i2s1 { &mshc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index f3f4a6ab4b49..35d949099166 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -18,8 +18,6 @@ / { aliases { serial0 = &serial_2; - mshc0 = &mmc_0; - mshc2 = &mmc_2; }; chosen { @@ -362,6 +360,7 @@ pmic_irq: pmic-irq-pins { &mmc_0 { status = "okay"; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; card-detect-delay = <200>;
Previously, the mshc0 alias has been necessary so that MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA are set for mshc_0/mmc_0. However, these capabilities should be described in the device tree so that we do not have to rely on the alias. The property mmc-ddr-1_8v replaces MMC_CAP_1_8V_DDR, while bus_width = <8>, which is already set for all the mshc0/mmc0 nodes, replaces MMC_CAP_8_BIT_DATA. Also drop other mshc aliases as they are not needed. Signed-off-by: Henrik Grimler <henrik@grimler.se> --- Changes since v1: * Add mmc-ddr-1_8v property so that capabilities stays the same when mshc0 alias is removed arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 3 +-- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-)