| Message ID | 20230201204447.542385-3-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | None | expand |
On Wed, Feb 01, 2023 at 09:44:46PM +0100, Marijn Suijten wrote: > Update the example to reflect a future requirement for the generic > adc-chan node name on ADC channel nodes, while conveying the board name > of the channel in a label instead. I don't think we've defined 'adc-chan' as THE generic name. Looks like we have: adc-chan adc-channel channel 'channel' is the most common (except for QCom). Rob
On Fri, 3 Feb 2023 15:25:01 -0600 Rob Herring <robh@kernel.org> wrote: > On Wed, Feb 01, 2023 at 09:44:46PM +0100, Marijn Suijten wrote: > > Update the example to reflect a future requirement for the generic > > adc-chan node name on ADC channel nodes, while conveying the board name > > of the channel in a label instead. > > I don't think we've defined 'adc-chan' as THE generic name. Looks like > we have: > > adc-chan > adc-channel > channel > > 'channel' is the most common (except for QCom). Good spot. We also have that defined as the channel name in bindings/iio/adc.yaml Now this particular binding doesn't use anything from that generic binding (other than trivial use of reg) but better to be consistent with it than not! Thanks, Jonathan > > Rob
On 2023-02-05 15:06:45, Jonathan Cameron wrote: > On Fri, 3 Feb 2023 15:25:01 -0600 > Rob Herring <robh@kernel.org> wrote: > > > On Wed, Feb 01, 2023 at 09:44:46PM +0100, Marijn Suijten wrote: > > > Update the example to reflect a future requirement for the generic > > > adc-chan node name on ADC channel nodes, while conveying the board name > > > of the channel in a label instead. > > > > I don't think we've defined 'adc-chan' as THE generic name. Looks like > > we have: > > > > adc-chan > > adc-channel > > channel > > > > 'channel' is the most common (except for QCom). > Good spot. > > We also have that defined as the channel name in > bindings/iio/adc.yaml Good point, let's match adc.yaml and use 'channel' instead. I'll respin this series with thas, as well as rebasing on -next to solve conflicts with 8013295662f5 ("arm64: dts: qcom: sc8280xp: Add label property to vadc channel nodes"): supposedly that DT originally relied on the `@XX` suffix bug :) > Now this particular binding doesn't use anything from that > generic binding (other than trivial use of reg) but better to be > consistent with it than not! Should it inherit the common binding, or was it omitted for a reason? - Marijn
On Thu, 16 Mar 2023 13:43:07 +0100 Marijn Suijten <marijn.suijten@somainline.org> wrote: > On 2023-02-05 15:06:45, Jonathan Cameron wrote: > > On Fri, 3 Feb 2023 15:25:01 -0600 > > Rob Herring <robh@kernel.org> wrote: > > > > > On Wed, Feb 01, 2023 at 09:44:46PM +0100, Marijn Suijten wrote: > > > > Update the example to reflect a future requirement for the generic > > > > adc-chan node name on ADC channel nodes, while conveying the board name > > > > of the channel in a label instead. > > > > > > I don't think we've defined 'adc-chan' as THE generic name. Looks like > > > we have: > > > > > > adc-chan > > > adc-channel > > > channel > > > > > > 'channel' is the most common (except for QCom). > > Good spot. > > > > We also have that defined as the channel name in > > bindings/iio/adc.yaml > > Good point, let's match adc.yaml and use 'channel' instead. I'll > respin this series with thas, as well as rebasing on -next to solve > conflicts with 8013295662f5 ("arm64: dts: qcom: sc8280xp: Add label > property to vadc channel nodes"): supposedly that DT originally relied > on the `@XX` suffix bug :) > > > Now this particular binding doesn't use anything from that > > generic binding (other than trivial use of reg) but better to be > > consistent with it than not! > > Should it inherit the common binding, or was it omitted for a reason? Harmless but little point as far as I can see given we don't happen to have any of the generic elements defined in the generic channel binding. Jonathan > > - Marijn >
On 2023-03-16 17:44:28, Jonathan Cameron wrote: <snip> > > Should it inherit the common binding, or was it omitted for a reason? > > Harmless but little point as far as I can see given we don't happen > to have any of the generic elements defined in the generic channel > binding. Supposedly the reg property, and now also the node name. Up to you to say whether I should inherit this (and strip out the common bits) or just focus on renaming the node name in the existing binding to channel. - Marijn
On Thu, 16 Mar 2023 23:44:50 +0100 Marijn Suijten <marijn.suijten@somainline.org> wrote: > On 2023-03-16 17:44:28, Jonathan Cameron wrote: > <snip> > > > Should it inherit the common binding, or was it omitted for a reason? > > > > Harmless but little point as far as I can see given we don't happen > > to have any of the generic elements defined in the generic channel > > binding. > > Supposedly the reg property, and now also the node name. Up to you to > say whether I should inherit this (and strip out the common bits) or > just focus on renaming the node name in the existing binding to channel. > > - Marijn Just rename the node name. Jonathan
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index 52ec18cf1eda..885c9e139848 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -178,10 +178,11 @@ examples: #io-channel-cells = <1>; /* Other properties are omitted */ - conn-therm@4f { + adc-chan@4f { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "conn_therm"; }; }; @@ -217,16 +218,18 @@ examples: #io-channel-cells = <1>; /* Other properties are omitted */ - xo-therm@44 { + adc-chan@44 { reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "xo_therm"; }; - conn-therm@147 { + adc-chan@147 { reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,ratiometric; qcom,hw-settle-time = <200>; + label = "conn_therm"; }; };
Update the example to reflect a future requirement for the generic adc-chan node name on ADC channel nodes, while conveying the board name of the channel in a label instead. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)