| Message ID | 20230316234926.208874-1-linux@roeck-us.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw/usb/imx: Fix out of bounds access in imx_usbphy_read() | expand |
On 3/17/23 12:49 AM, Guenter Roeck wrote: > The i.MX USB Phy driver does not check register ranges, resulting in out of > bounds accesses if an attempt is made to access non-existing PHY registers. > Add range check and conditionally report bad accesses to fix the problem. > > While at it, also conditionally log attempted writes to non-existing or > read-only registers. > > Reported-by: Qiang Liu <cyruscyliu@gmail.com> > Link: https://gitlab.com/qemu-project/qemu/-/issues/1408 > Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support") > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > --- > hw/usb/imx-usb-phy.c | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) > > diff --git a/hw/usb/imx-usb-phy.c b/hw/usb/imx-usb-phy.c > index 5d7a549e34..1a97b36a11 100644 > --- a/hw/usb/imx-usb-phy.c > +++ b/hw/usb/imx-usb-phy.c > @@ -13,6 +13,7 @@ > #include "qemu/osdep.h" > #include "hw/usb/imx-usb-phy.h" > #include "migration/vmstate.h" > +#include "qemu/log.h" > #include "qemu/module.h" > > static const VMStateDescription vmstate_imx_usbphy = { > @@ -90,7 +91,15 @@ static uint64_t imx_usbphy_read(void *opaque, hwaddr offset, unsigned size) > value = s->usbphy[index - 3]; > break; > default: > - value = s->usbphy[index]; > + if (index < USBPHY_MAX) { > + value = s->usbphy[index]; > + } else { > + qemu_log_mask(LOG_GUEST_ERROR, > + "%s: Read from non-existing USB PHY register 0x%" > + HWADDR_PRIx "\n", > + __func__, offset); > + value = 0; > + } > break; > } > return (uint64_t)value; > @@ -168,7 +177,13 @@ static void imx_usbphy_write(void *opaque, hwaddr offset, uint64_t value, > s->usbphy[index - 3] ^= value; > break; > default: > - /* Other registers are read-only */ > + /* Other registers are read-only or do not exist */ > + qemu_log_mask(LOG_GUEST_ERROR, > + "%s: Write to %s USB PHY register 0x%" > + HWADDR_PRIx "\n", > + __func__, > + index >= USBPHY_MAX ? "non-existing" : "read-only", > + offset); > break; > } > } Tested-by: Qiang Liu <cyruscyliu@gmail.com>
On Thu, 16 Mar 2023 at 23:49, Guenter Roeck <linux@roeck-us.net> wrote: > > The i.MX USB Phy driver does not check register ranges, resulting in out of > bounds accesses if an attempt is made to access non-existing PHY registers. > Add range check and conditionally report bad accesses to fix the problem. > > While at it, also conditionally log attempted writes to non-existing or > read-only registers. > > Reported-by: Qiang Liu <cyruscyliu@gmail.com> > Link: https://gitlab.com/qemu-project/qemu/-/issues/1408 > Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support") > Signed-off-by: Guenter Roeck <linux@roeck-us.net> Applied to target-arm.next, thanks. -- PMM
On 17/3/23 00:49, Guenter Roeck wrote: > The i.MX USB Phy driver does not check register ranges, resulting in out of > bounds accesses if an attempt is made to access non-existing PHY registers. > Add range check and conditionally report bad accesses to fix the problem. > > While at it, also conditionally log attempted writes to non-existing or > read-only registers. > > Reported-by: Qiang Liu <cyruscyliu@gmail.com> > Link: https://gitlab.com/qemu-project/qemu/-/issues/1408 > Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support") > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > --- > hw/usb/imx-usb-phy.c | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
diff --git a/hw/usb/imx-usb-phy.c b/hw/usb/imx-usb-phy.c index 5d7a549e34..1a97b36a11 100644 --- a/hw/usb/imx-usb-phy.c +++ b/hw/usb/imx-usb-phy.c @@ -13,6 +13,7 @@ #include "qemu/osdep.h" #include "hw/usb/imx-usb-phy.h" #include "migration/vmstate.h" +#include "qemu/log.h" #include "qemu/module.h" static const VMStateDescription vmstate_imx_usbphy = { @@ -90,7 +91,15 @@ static uint64_t imx_usbphy_read(void *opaque, hwaddr offset, unsigned size) value = s->usbphy[index - 3]; break; default: - value = s->usbphy[index]; + if (index < USBPHY_MAX) { + value = s->usbphy[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Read from non-existing USB PHY register 0x%" + HWADDR_PRIx "\n", + __func__, offset); + value = 0; + } break; } return (uint64_t)value; @@ -168,7 +177,13 @@ static void imx_usbphy_write(void *opaque, hwaddr offset, uint64_t value, s->usbphy[index - 3] ^= value; break; default: - /* Other registers are read-only */ + /* Other registers are read-only or do not exist */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Write to %s USB PHY register 0x%" + HWADDR_PRIx "\n", + __func__, + index >= USBPHY_MAX ? "non-existing" : "read-only", + offset); break; } }
The i.MX USB Phy driver does not check register ranges, resulting in out of bounds accesses if an attempt is made to access non-existing PHY registers. Add range check and conditionally report bad accesses to fix the problem. While at it, also conditionally log attempted writes to non-existing or read-only registers. Reported-by: Qiang Liu <cyruscyliu@gmail.com> Link: https://gitlab.com/qemu-project/qemu/-/issues/1408 Fixes: 0701a5efa015 ("hw/usb: Add basic i.MX USB Phy support") Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/usb/imx-usb-phy.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)