| Message ID | 20230317233626.3968358-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: display: Drop unneeded quotes | expand |
Hi Rob, Thank you for the patch. On Fri, Mar 17, 2023 at 06:36:24PM -0500, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../display/bridge/toshiba,tc358767.yaml | 2 +- > .../bindings/display/dp-aux-bus.yaml | 2 +- > .../display/mediatek/mediatek,hdmi.yaml | 2 +- > .../display/msm/dsi-controller-main.yaml | 8 ++++---- > .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +- > .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +- > .../bindings/display/renesas,du.yaml | 4 ++-- > .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +- > .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------ > .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++-- > .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +- > .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------ > .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++--- > .../bindings/display/ti/ti,am65x-dss.yaml | 2 +- > .../display/xylon,logicvc-display.yaml | 18 +++++++++--------- > 17 files changed, 42 insertions(+), 42 deletions(-) > > diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > index fc4873deb76f..4f6ffb8182a9 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > @@ -10,7 +10,7 @@ maintainers: > - Robin van der Gracht <robin@protonic.nl> > > allOf: > - - $ref: "/schemas/input/matrix-keymap.yaml#" > + - $ref: /schemas/input/matrix-keymap.yaml# > > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > index 107dd138e6c6..cdeb67bc05f0 100644 > --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > @@ -18,7 +18,7 @@ properties: > maxItems: 1 > > edid-emulation: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: > The EDID emulation entry to use > Value Resolution Description > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > index 140927884418..e1494b5007cb 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > @@ -23,7 +23,7 @@ properties: > i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins > > clock-names: > - const: "ref" > + const: ref > > clocks: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > index 5e4afe9f98fb..0ece7b01790b 100644 > --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > @@ -26,7 +26,7 @@ description: > > properties: > $nodename: > - const: "aux-bus" > + const: aux-bus > > panel: > $ref: panel/panel-common.yaml# > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > index 8afdd67d6780..b90b6d18a828 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > @@ -50,7 +50,7 @@ properties: > - const: hdmi > > mediatek,syscon-hdmi: > - $ref: '/schemas/types.yaml#/definitions/phandle-array' > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > - items: > - description: phandle to system configuration registers > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > index e75a3efe4dac..2188d7c9b0bb 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > @@ -74,7 +74,7 @@ properties: > > syscon-sfpb: > description: A phandle to mmss_sfpb syscon node (only for DSIv2). > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > qcom,dual-dsi-mode: > type: boolean > @@ -105,14 +105,14 @@ properties: > type: object > > ports: > - $ref: "/schemas/graph.yaml#/properties/ports" > + $ref: /schemas/graph.yaml#/properties/ports > description: | > Contains DSI controller input and output ports as children, each > containing one endpoint subnode. > > properties: > port@0: > - $ref: "/schemas/graph.yaml#/$defs/port-base" > + $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > description: | > Input endpoints of the controller. > @@ -128,7 +128,7 @@ properties: > enum: [ 0, 1, 2, 3 ] > > port@1: > - $ref: "/schemas/graph.yaml#/$defs/port-base" > + $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > description: | > Output endpoints of the controller. > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > index 3ec466c3ab38..e6b00d7387ce 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > @@ -58,7 +58,7 @@ properties: > maximum: 31 > > qcom,phy-drive-ldo-level: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: > The PHY LDO has an amplitude tuning feature to adjust the LDO output > for the HSTX drive. Use supported levels (mV) to offset the drive level > diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > index d67617f6f74a..95ce22c6787a 100644 > --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > @@ -37,7 +37,7 @@ properties: > > backlight: > description: Backlight used by the panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml > index d4830f52c512..c5b9e6812bce 100644 > --- a/Documentation/devicetree/bindings/display/renesas,du.yaml > +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml > @@ -76,7 +76,7 @@ properties: > unevaluatedProperties: false > > renesas,cmms: > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > maxItems: 1 > description: > @@ -84,7 +84,7 @@ properties: > available DU channel. > > renesas,vsps: > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > items: > - description: phandle to VSP instance that serves the DU channel > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > index d5ca8cf86e8e..f448624dd779 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > @@ -38,7 +38,7 @@ properties: > description: The number of cells in a MIPI calibration specifier. > Should be 1. The single cell specifies a bitmask of the pads that > need to be calibrated for a given device. > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > const: 1 > > additionalProperties: false > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > index 907fb0baccae..70f0e45c71d6 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > @@ -69,12 +69,12 @@ properties: > # Tegra186 and later > nvidia,interface: > description: index of the SOR interface > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -82,23 +82,23 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel, required for eDP > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,xbar-cfg: > description: 5 cells containing the crossbar configuration. > Each lane of the SOR, identified by the cell's index, is > mapped via the crossbar to the pad specified by the cell's > value. > - $ref: "/schemas/types.yaml#/definitions/uint32-array" > + $ref: /schemas/types.yaml#/definitions/uint32-array > > # optional when driving an eDP output > nvidia,dpaux: > description: phandle to a DispayPort AUX interface > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > allOf: > - if: > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > index 265a60d79d89..ce4589466a18 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > @@ -60,13 +60,13 @@ properties: > nvidia,outputs: > description: A list of phandles of outputs that this display > controller can drive. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > > nvidia,head: > description: The number of the display controller head. This > is used to setup the various types of output to receive > video data from the given head. > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > index e5a6145c8c53..da75b71e8ece 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > @@ -29,7 +29,7 @@ properties: > - const: dsi > > allOf: > - - $ref: "/schemas/reset/reset.yaml" > + - $ref: /schemas/reset/reset.yaml > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > index 511cbe74e729..59e1dc0813e7 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > @@ -59,12 +59,12 @@ properties: > description: Should contain a phandle and a specifier specifying > which pads are used by this DSI output and need to be > calibrated. See nvidia,tegra114-mipi.yaml for details. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -72,19 +72,19 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,ganged-mode: > description: contains a phandle to a second DSI controller to > gang up with in order to support up to 8 data lanes > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > allOf: > - - $ref: "../dsi-controller.yaml#" > + - $ref: ../dsi-controller.yaml# > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > index f65e59cfffa7..f77197e4869f 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > @@ -68,7 +68,7 @@ properties: > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -76,11 +76,11 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > "#sound-dai-cells": > const: 0 > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > index 5c7d2cbc4aac..4247280d6c3c 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > @@ -88,7 +88,7 @@ properties: > The DSS DPI output port node from video port 2 > > ti,am65x-oldi-io-ctrl: > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > description: > phandle to syscon device node mapping OLDI IO_CTRL registers. > The mapped range should point to OLDI_DAT0_IO_CTRL, map it and > diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > index fc02c5d50ce4..87404d72ea37 100644 > --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > @@ -89,25 +89,25 @@ properties: > description: Display output colorspace (C_DISPLAY_COLOR_SPACE). > > xylon,display-depth: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Display output depth (C_PIXEL_DATA_WIDTH). > > xylon,row-stride: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). > > xylon,dithering: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: Dithering module is enabled (C_XCOLOR) > > xylon,background-layer: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > The last layer is used to display a black background (C_USE_BACKGROUND). > The layer must still be registered. > > xylon,layers-configurable: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > Configuration of layers' size, position and offset is enabled > (C_USE_SIZE_POSITION). > @@ -131,7 +131,7 @@ properties: > maxItems: 1 > > xylon,layer-depth: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Layer depth (C_LAYER_X_DATA_WIDTH). > > xylon,layer-colorspace: > @@ -151,19 +151,19 @@ properties: > description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). > > xylon,layer-base-offset: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Offset in number of lines (C_LAYER_X_OFFSET) starting from the > video RAM base (C_VMEM_BASEADDR), only for version 3. > > xylon,layer-buffer-offset: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Offset in number of lines (C_BUFFER_*_OFFSET) starting from the > layer base offset for the second buffer used in double-buffering. > > xylon,layer-primary: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > Layer should be registered as a primary plane (exactly one is > required).
On 18/03/2023 00:36, Rob Herring wrote: > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
Hi, Rob: Rob Herring <robh@kernel.org> 於 2023年3月18日 週六 上午7:36寫道： > > Cleanup bindings dropping unneeded quotes. Once all these are fixed, > checking for this can be enabled in yamllint. For MediaTek part, Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../display/bridge/toshiba,tc358767.yaml | 2 +- > .../bindings/display/dp-aux-bus.yaml | 2 +- > .../display/mediatek/mediatek,hdmi.yaml | 2 +- > .../display/msm/dsi-controller-main.yaml | 8 ++++---- > .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +- > .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +- > .../bindings/display/renesas,du.yaml | 4 ++-- > .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +- > .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------ > .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++-- > .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +- > .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------ > .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++--- > .../bindings/display/ti/ti,am65x-dss.yaml | 2 +- > .../display/xylon,logicvc-display.yaml | 18 +++++++++--------- > 17 files changed, 42 insertions(+), 42 deletions(-) > > diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > index fc4873deb76f..4f6ffb8182a9 100644 > --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml > @@ -10,7 +10,7 @@ maintainers: > - Robin van der Gracht <robin@protonic.nl> > > allOf: > - - $ref: "/schemas/input/matrix-keymap.yaml#" > + - $ref: /schemas/input/matrix-keymap.yaml# > > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > index 107dd138e6c6..cdeb67bc05f0 100644 > --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml > @@ -18,7 +18,7 @@ properties: > maxItems: 1 > > edid-emulation: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: > The EDID emulation entry to use > Value Resolution Description > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > index 140927884418..e1494b5007cb 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml > @@ -23,7 +23,7 @@ properties: > i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins > > clock-names: > - const: "ref" > + const: ref > > clocks: > maxItems: 1 > diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > index 5e4afe9f98fb..0ece7b01790b 100644 > --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml > @@ -26,7 +26,7 @@ description: > > properties: > $nodename: > - const: "aux-bus" > + const: aux-bus > > panel: > $ref: panel/panel-common.yaml# > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > index 8afdd67d6780..b90b6d18a828 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml > @@ -50,7 +50,7 @@ properties: > - const: hdmi > > mediatek,syscon-hdmi: > - $ref: '/schemas/types.yaml#/definitions/phandle-array' > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > - items: > - description: phandle to system configuration registers > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > index e75a3efe4dac..2188d7c9b0bb 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > @@ -74,7 +74,7 @@ properties: > > syscon-sfpb: > description: A phandle to mmss_sfpb syscon node (only for DSIv2). > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > qcom,dual-dsi-mode: > type: boolean > @@ -105,14 +105,14 @@ properties: > type: object > > ports: > - $ref: "/schemas/graph.yaml#/properties/ports" > + $ref: /schemas/graph.yaml#/properties/ports > description: | > Contains DSI controller input and output ports as children, each > containing one endpoint subnode. > > properties: > port@0: > - $ref: "/schemas/graph.yaml#/$defs/port-base" > + $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > description: | > Input endpoints of the controller. > @@ -128,7 +128,7 @@ properties: > enum: [ 0, 1, 2, 3 ] > > port@1: > - $ref: "/schemas/graph.yaml#/$defs/port-base" > + $ref: /schemas/graph.yaml#/$defs/port-base > unevaluatedProperties: false > description: | > Output endpoints of the controller. > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > index 3ec466c3ab38..e6b00d7387ce 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > @@ -58,7 +58,7 @@ properties: > maximum: 31 > > qcom,phy-drive-ldo-level: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: > The PHY LDO has an amplitude tuning feature to adjust the LDO output > for the HSTX drive. Use supported levels (mV) to offset the drive level > diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > index d67617f6f74a..95ce22c6787a 100644 > --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml > @@ -37,7 +37,7 @@ properties: > > backlight: > description: Backlight used by the panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml > index d4830f52c512..c5b9e6812bce 100644 > --- a/Documentation/devicetree/bindings/display/renesas,du.yaml > +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml > @@ -76,7 +76,7 @@ properties: > unevaluatedProperties: false > > renesas,cmms: > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > maxItems: 1 > description: > @@ -84,7 +84,7 @@ properties: > available DU channel. > > renesas,vsps: > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > items: > items: > - description: phandle to VSP instance that serves the DU channel > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > index d5ca8cf86e8e..f448624dd779 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml > @@ -38,7 +38,7 @@ properties: > description: The number of cells in a MIPI calibration specifier. > Should be 1. The single cell specifies a bitmask of the pads that > need to be calibrated for a given device. > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > const: 1 > > additionalProperties: false > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > index 907fb0baccae..70f0e45c71d6 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml > @@ -69,12 +69,12 @@ properties: > # Tegra186 and later > nvidia,interface: > description: index of the SOR interface > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -82,23 +82,23 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel, required for eDP > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,xbar-cfg: > description: 5 cells containing the crossbar configuration. > Each lane of the SOR, identified by the cell's index, is > mapped via the crossbar to the pad specified by the cell's > value. > - $ref: "/schemas/types.yaml#/definitions/uint32-array" > + $ref: /schemas/types.yaml#/definitions/uint32-array > > # optional when driving an eDP output > nvidia,dpaux: > description: phandle to a DispayPort AUX interface > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > allOf: > - if: > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > index 265a60d79d89..ce4589466a18 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml > @@ -60,13 +60,13 @@ properties: > nvidia,outputs: > description: A list of phandles of outputs that this display > controller can drive. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > > nvidia,head: > description: The number of the display controller head. This > is used to setup the various types of output to receive > video data from the given head. > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > index e5a6145c8c53..da75b71e8ece 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml > @@ -29,7 +29,7 @@ properties: > - const: dsi > > allOf: > - - $ref: "/schemas/reset/reset.yaml" > + - $ref: /schemas/reset/reset.yaml > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > index 511cbe74e729..59e1dc0813e7 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml > @@ -59,12 +59,12 @@ properties: > description: Should contain a phandle and a specifier specifying > which pads are used by this DSI output and need to be > calibrated. See nvidia,tegra114-mipi.yaml for details. > - $ref: "/schemas/types.yaml#/definitions/phandle-array" > + $ref: /schemas/types.yaml#/definitions/phandle-array > > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -72,19 +72,19 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,ganged-mode: > description: contains a phandle to a second DSI controller to > gang up with in order to support up to 8 data lanes > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > allOf: > - - $ref: "../dsi-controller.yaml#" > + - $ref: ../dsi-controller.yaml# > - if: > properties: > compatible: > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > index f65e59cfffa7..f77197e4869f 100644 > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml > @@ -68,7 +68,7 @@ properties: > nvidia,ddc-i2c-bus: > description: phandle of an I2C controller used for DDC EDID > probing > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > nvidia,hpd-gpio: > description: specifies a GPIO used for hotplug detection > @@ -76,11 +76,11 @@ properties: > > nvidia,edid: > description: supplies a binary EDID blob > - $ref: "/schemas/types.yaml#/definitions/uint8-array" > + $ref: /schemas/types.yaml#/definitions/uint8-array > > nvidia,panel: > description: phandle of a display panel > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > > "#sound-dai-cells": > const: 0 > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > index 5c7d2cbc4aac..4247280d6c3c 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > @@ -88,7 +88,7 @@ properties: > The DSS DPI output port node from video port 2 > > ti,am65x-oldi-io-ctrl: > - $ref: "/schemas/types.yaml#/definitions/phandle" > + $ref: /schemas/types.yaml#/definitions/phandle > description: > phandle to syscon device node mapping OLDI IO_CTRL registers. > The mapped range should point to OLDI_DAT0_IO_CTRL, map it and > diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > index fc02c5d50ce4..87404d72ea37 100644 > --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > @@ -89,25 +89,25 @@ properties: > description: Display output colorspace (C_DISPLAY_COLOR_SPACE). > > xylon,display-depth: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Display output depth (C_PIXEL_DATA_WIDTH). > > xylon,row-stride: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). > > xylon,dithering: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: Dithering module is enabled (C_XCOLOR) > > xylon,background-layer: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > The last layer is used to display a black background (C_USE_BACKGROUND). > The layer must still be registered. > > xylon,layers-configurable: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > Configuration of layers' size, position and offset is enabled > (C_USE_SIZE_POSITION). > @@ -131,7 +131,7 @@ properties: > maxItems: 1 > > xylon,layer-depth: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Layer depth (C_LAYER_X_DATA_WIDTH). > > xylon,layer-colorspace: > @@ -151,19 +151,19 @@ properties: > description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). > > xylon,layer-base-offset: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Offset in number of lines (C_LAYER_X_OFFSET) starting from the > video RAM base (C_VMEM_BASEADDR), only for version 3. > > xylon,layer-buffer-offset: > - $ref: "/schemas/types.yaml#/definitions/uint32" > + $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Offset in number of lines (C_BUFFER_*_OFFSET) starting from the > layer base offset for the second buffer used in double-buffering. > > xylon,layer-primary: > - $ref: "/schemas/types.yaml#/definitions/flag" > + $ref: /schemas/types.yaml#/definitions/flag > description: | > Layer should be registered as a primary plane (exactly one is > required). > -- > 2.39.2 >
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index fc4873deb76f..4f6ffb8182a9 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -10,7 +10,7 @@ maintainers: - Robin van der Gracht <robin@protonic.nl> allOf: - - $ref: "/schemas/input/matrix-keymap.yaml#" + - $ref: /schemas/input/matrix-keymap.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml index 107dd138e6c6..cdeb67bc05f0 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -18,7 +18,7 @@ properties: maxItems: 1 edid-emulation: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: The EDID emulation entry to use Value Resolution Description diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index 140927884418..e1494b5007cb 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -23,7 +23,7 @@ properties: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins clock-names: - const: "ref" + const: ref clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml index 5e4afe9f98fb..0ece7b01790b 100644 --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml @@ -26,7 +26,7 @@ description: properties: $nodename: - const: "aux-bus" + const: aux-bus panel: $ref: panel/panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml index 8afdd67d6780..b90b6d18a828 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml @@ -50,7 +50,7 @@ properties: - const: hdmi mediatek,syscon-hdmi: - $ref: '/schemas/types.yaml#/definitions/phandle-array' + $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: phandle to system configuration registers diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index e75a3efe4dac..2188d7c9b0bb 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -74,7 +74,7 @@ properties: syscon-sfpb: description: A phandle to mmss_sfpb syscon node (only for DSIv2). - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle qcom,dual-dsi-mode: type: boolean @@ -105,14 +105,14 @@ properties: type: object ports: - $ref: "/schemas/graph.yaml#/properties/ports" + $ref: /schemas/graph.yaml#/properties/ports description: | Contains DSI controller input and output ports as children, each containing one endpoint subnode. properties: port@0: - $ref: "/schemas/graph.yaml#/$defs/port-base" + $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: | Input endpoints of the controller. @@ -128,7 +128,7 @@ properties: enum: [ 0, 1, 2, 3 ] port@1: - $ref: "/schemas/graph.yaml#/$defs/port-base" + $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false description: | Output endpoints of the controller. diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 3ec466c3ab38..e6b00d7387ce 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -58,7 +58,7 @@ properties: maximum: 31 qcom,phy-drive-ldo-level: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: The PHY LDO has an amplitude tuning feature to adjust the LDO output for the HSTX drive. Use supported levels (mV) to offset the drive level diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index d67617f6f74a..95ce22c6787a 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -37,7 +37,7 @@ properties: backlight: description: Backlight used by the panel - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle required: - compatible diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index d4830f52c512..c5b9e6812bce 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -76,7 +76,7 @@ properties: unevaluatedProperties: false renesas,cmms: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 description: @@ -84,7 +84,7 @@ properties: available DU channel. renesas,vsps: - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: items: - description: phandle to VSP instance that serves the DU channel diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml index d5ca8cf86e8e..f448624dd779 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml @@ -38,7 +38,7 @@ properties: description: The number of cells in a MIPI calibration specifier. Should be 1. The single cell specifies a bitmask of the pads that need to be calibrated for a given device. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 const: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml index 907fb0baccae..70f0e45c71d6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml @@ -69,12 +69,12 @@ properties: # Tegra186 and later nvidia,interface: description: index of the SOR interface - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 nvidia,ddc-i2c-bus: description: phandle of an I2C controller used for DDC EDID probing - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle nvidia,hpd-gpio: description: specifies a GPIO used for hotplug detection @@ -82,23 +82,23 @@ properties: nvidia,edid: description: supplies a binary EDID blob - $ref: "/schemas/types.yaml#/definitions/uint8-array" + $ref: /schemas/types.yaml#/definitions/uint8-array nvidia,panel: description: phandle of a display panel, required for eDP - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle nvidia,xbar-cfg: description: 5 cells containing the crossbar configuration. Each lane of the SOR, identified by the cell's index, is mapped via the crossbar to the pad specified by the cell's value. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array # optional when driving an eDP output nvidia,dpaux: description: phandle to a DispayPort AUX interface - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml index 265a60d79d89..ce4589466a18 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml @@ -60,13 +60,13 @@ properties: nvidia,outputs: description: A list of phandles of outputs that this display controller can drive. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array nvidia,head: description: The number of the display controller head. This is used to setup the various types of output to receive video data from the given head. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml index e5a6145c8c53..da75b71e8ece 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml @@ -29,7 +29,7 @@ properties: - const: dsi allOf: - - $ref: "/schemas/reset/reset.yaml" + - $ref: /schemas/reset/reset.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml index 511cbe74e729..59e1dc0813e7 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml @@ -59,12 +59,12 @@ properties: description: Should contain a phandle and a specifier specifying which pads are used by this DSI output and need to be calibrated. See nvidia,tegra114-mipi.yaml for details. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array nvidia,ddc-i2c-bus: description: phandle of an I2C controller used for DDC EDID probing - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle nvidia,hpd-gpio: description: specifies a GPIO used for hotplug detection @@ -72,19 +72,19 @@ properties: nvidia,edid: description: supplies a binary EDID blob - $ref: "/schemas/types.yaml#/definitions/uint8-array" + $ref: /schemas/types.yaml#/definitions/uint8-array nvidia,panel: description: phandle of a display panel - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle nvidia,ganged-mode: description: contains a phandle to a second DSI controller to gang up with in order to support up to 8 data lanes - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle allOf: - - $ref: "../dsi-controller.yaml#" + - $ref: ../dsi-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml index f65e59cfffa7..f77197e4869f 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml @@ -68,7 +68,7 @@ properties: nvidia,ddc-i2c-bus: description: phandle of an I2C controller used for DDC EDID probing - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle nvidia,hpd-gpio: description: specifies a GPIO used for hotplug detection @@ -76,11 +76,11 @@ properties: nvidia,edid: description: supplies a binary EDID blob - $ref: "/schemas/types.yaml#/definitions/uint8-array" + $ref: /schemas/types.yaml#/definitions/uint8-array nvidia,panel: description: phandle of a display panel - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle "#sound-dai-cells": const: 0 diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 5c7d2cbc4aac..4247280d6c3c 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -88,7 +88,7 @@ properties: The DSS DPI output port node from video port 2 ti,am65x-oldi-io-ctrl: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml index fc02c5d50ce4..87404d72ea37 100644 --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml @@ -89,25 +89,25 @@ properties: description: Display output colorspace (C_DISPLAY_COLOR_SPACE). xylon,display-depth: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: Display output depth (C_PIXEL_DATA_WIDTH). xylon,row-stride: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). xylon,dithering: - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag description: Dithering module is enabled (C_XCOLOR) xylon,background-layer: - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag description: | The last layer is used to display a black background (C_USE_BACKGROUND). The layer must still be registered. xylon,layers-configurable: - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag description: | Configuration of layers' size, position and offset is enabled (C_USE_SIZE_POSITION). @@ -131,7 +131,7 @@ properties: maxItems: 1 xylon,layer-depth: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: Layer depth (C_LAYER_X_DATA_WIDTH). xylon,layer-colorspace: @@ -151,19 +151,19 @@ properties: description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). xylon,layer-base-offset: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset in number of lines (C_LAYER_X_OFFSET) starting from the video RAM base (C_VMEM_BASEADDR), only for version 3. xylon,layer-buffer-offset: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 description: | Offset in number of lines (C_BUFFER_*_OFFSET) starting from the layer base offset for the second buffer used in double-buffering. xylon,layer-primary: - $ref: "/schemas/types.yaml#/definitions/flag" + $ref: /schemas/types.yaml#/definitions/flag description: | Layer should be registered as a primary plane (exactly one is required).
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- .../display/bridge/toshiba,tc358767.yaml | 2 +- .../bindings/display/dp-aux-bus.yaml | 2 +- .../display/mediatek/mediatek,hdmi.yaml | 2 +- .../display/msm/dsi-controller-main.yaml | 8 ++++---- .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +- .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +- .../bindings/display/renesas,du.yaml | 4 ++-- .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +- .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------ .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++-- .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +- .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------ .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++--- .../bindings/display/ti/ti,am65x-dss.yaml | 2 +- .../display/xylon,logicvc-display.yaml | 18 +++++++++--------- 17 files changed, 42 insertions(+), 42 deletions(-)