| Message ID | 20230317185230.46189-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1,1/1] backlight: hx8357: Convert to agnostic GPIO API | expand |
On Fri, Mar 17, 2023 at 7:51 PM Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > The of_gpio.h is going to be removed. In preparation of that convert > the driver to the agnostic API. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Thanks for fixing this Andy! > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > +#if IS_ENABLED(CONFIG_LCD_HX8357) > /* > * Himax LCD controllers used incorrectly named > * "gpios-reset" property and also specified wrong > @@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, > */ > const char *compatible; > } gpios[] = { > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > +#if IS_ENABLED(CONFIG_LCD_HX8357) > /* Himax LCD controllers used "gpios-reset" */ > { "reset", "gpios-reset", "himax,hx8357" }, > { "reset", "gpios-reset", "himax,hx8369" }, Eh what happened here .. it's even intuitively wrong. I would add Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings") It wasn't used until now it seems so not a regression and no need for a separate patch. Other than that it looks correct. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On Fri, Mar 17, 2023 at 09:53:40PM +0100, Linus Walleij wrote: > On Fri, Mar 17, 2023 at 7:51 PM Andy Shevchenko > <andriy.shevchenko@linux.intel.com> wrote: > > > The of_gpio.h is going to be removed. In preparation of that convert > > the driver to the agnostic API. > > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Thanks for fixing this Andy! > > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > /* > > * Himax LCD controllers used incorrectly named > > * "gpios-reset" property and also specified wrong > > @@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, > > */ > > const char *compatible; > > } gpios[] = { > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > /* Himax LCD controllers used "gpios-reset" */ > > { "reset", "gpios-reset", "himax,hx8357" }, > > { "reset", "gpios-reset", "himax,hx8369" }, > > Eh what happened here .. it's even intuitively wrong. I believe it had to be something like #if 0 && IS_ENABLED() to show that this change is for the future. Currently it does something unneeded for the kernels with that option off. > I would add > Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines > with legacy bindings") I'm not sure. But it's fine, I can add it. Just want to double confirm you really want this Fixes tag. > It wasn't used until now it seems so not a regression and no > need for a separate patch. Exactly why I'm not sure about the tag :-) > Other than that it looks correct. > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Thank you!
On Mon, Mar 20, 2023 at 01:54:26PM +0200, Andy Shevchenko wrote: > On Fri, Mar 17, 2023 at 09:53:40PM +0100, Linus Walleij wrote: > > On Fri, Mar 17, 2023 at 7:51 PM Andy Shevchenko > > <andriy.shevchenko@linux.intel.com> wrote: > > > > > The of_gpio.h is going to be removed. In preparation of that convert > > > the driver to the agnostic API. > > > > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > > > Thanks for fixing this Andy! > > > > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > > /* > > > * Himax LCD controllers used incorrectly named > > > * "gpios-reset" property and also specified wrong > > > @@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, > > > */ > > > const char *compatible; > > > } gpios[] = { > > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > > /* Himax LCD controllers used "gpios-reset" */ > > > { "reset", "gpios-reset", "himax,hx8357" }, > > > { "reset", "gpios-reset", "himax,hx8369" }, > > > > Eh what happened here .. it's even intuitively wrong. > > I believe it had to be something like > > #if 0 && IS_ENABLED() > > to show that this change is for the future. > Currently it does something unneeded for the kernels with that option off. > > > I would add > > Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines > > with legacy bindings") > > I'm not sure. But it's fine, I can add it. Just want to double confirm > you really want this Fixes tag. > > > It wasn't used until now it seems so not a regression and no > > need for a separate patch. > > Exactly why I'm not sure about the tag :-) > > > Other than that it looks correct. > > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > > Thank you! Lee, is anything I can do here to move this forward?
On Mon, Jun 05, 2023 at 07:07:24PM +0300, Andy Shevchenko wrote: > On Mon, Mar 20, 2023 at 01:54:26PM +0200, Andy Shevchenko wrote: > > On Fri, Mar 17, 2023 at 09:53:40PM +0100, Linus Walleij wrote: > > > On Fri, Mar 17, 2023 at 7:51 PM Andy Shevchenko > > > <andriy.shevchenko@linux.intel.com> wrote: > > > > > > > The of_gpio.h is going to be removed. In preparation of that convert > > > > the driver to the agnostic API. > > > > > > > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > > > > > Thanks for fixing this Andy! > > > > > > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > > > /* > > > > * Himax LCD controllers used incorrectly named > > > > * "gpios-reset" property and also specified wrong > > > > @@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, > > > > */ > > > > const char *compatible; > > > > } gpios[] = { > > > > -#if !IS_ENABLED(CONFIG_LCD_HX8357) > > > > +#if IS_ENABLED(CONFIG_LCD_HX8357) > > > > /* Himax LCD controllers used "gpios-reset" */ > > > > { "reset", "gpios-reset", "himax,hx8357" }, > > > > { "reset", "gpios-reset", "himax,hx8369" }, > > > > > > Eh what happened here .. it's even intuitively wrong. > > > > I believe it had to be something like > > > > #if 0 && IS_ENABLED() > > > > to show that this change is for the future. > > Currently it does something unneeded for the kernels with that option off. > > > > > I would add > > > Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines > > > with legacy bindings") > > > > I'm not sure. But it's fine, I can add it. Just want to double confirm > > you really want this Fixes tag. > > > > > It wasn't used until now it seems so not a regression and no > > > need for a separate patch. > > > > Exactly why I'm not sure about the tag :-) > > > > > Other than that it looks correct. > > > Reviewed-by: Linus Walleij <linus.walleij@linaro.org> > > > > Thank you! > > Lee, is anything I can do here to move this forward? Backlight code looks OK to me (although I might regard the Fixes: discussion as unresolved)there is an unresolved): Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Daniel.
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 1436cdb5fa26..cdd536a391be 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -184,7 +184,7 @@ static void of_gpio_try_fixup_polarity(const struct device_node *np, const char *propname; bool active_high; } gpios[] = { -#if !IS_ENABLED(CONFIG_LCD_HX8357) +#if IS_ENABLED(CONFIG_LCD_HX8357) /* * Himax LCD controllers used incorrectly named * "gpios-reset" property and also specified wrong @@ -452,7 +452,7 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, */ const char *compatible; } gpios[] = { -#if !IS_ENABLED(CONFIG_LCD_HX8357) +#if IS_ENABLED(CONFIG_LCD_HX8357) /* Himax LCD controllers used "gpios-reset" */ { "reset", "gpios-reset", "himax,hx8357" }, { "reset", "gpios-reset", "himax,hx8369" }, diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c index 9b50bc96e00f..d7298376cf74 100644 --- a/drivers/video/backlight/hx8357.c +++ b/drivers/video/backlight/hx8357.c @@ -6,11 +6,11 @@ */ #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/lcd.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/spi/spi.h> #define HX8357_NUM_IM_PINS 3 @@ -83,11 +83,10 @@ #define HX8369_SET_GAMMA_CURVE_RELATED 0xe0 struct hx8357_data { - unsigned im_pins[HX8357_NUM_IM_PINS]; - unsigned reset; + struct gpio_descs *im_pins; + struct gpio_desc *reset; struct spi_device *spi; int state; - bool use_im_pins; }; static u8 hx8357_seq_power[] = { @@ -321,11 +320,11 @@ static void hx8357_lcd_reset(struct lcd_device *lcdev) struct hx8357_data *lcd = lcd_get_data(lcdev); /* Reset the screen */ - gpio_set_value(lcd->reset, 1); + gpiod_set_value(lcd->reset, 0); usleep_range(10000, 12000); - gpio_set_value(lcd->reset, 0); + gpiod_set_value(lcd->reset, 1); usleep_range(10000, 12000); - gpio_set_value(lcd->reset, 1); + gpiod_set_value(lcd->reset, 0); /* The controller needs 120ms to recover from reset */ msleep(120); @@ -340,10 +339,10 @@ static int hx8357_lcd_init(struct lcd_device *lcdev) * Set the interface selection pins to SPI mode, with three * wires */ - if (lcd->use_im_pins) { - gpio_set_value_cansleep(lcd->im_pins[0], 1); - gpio_set_value_cansleep(lcd->im_pins[1], 0); - gpio_set_value_cansleep(lcd->im_pins[2], 1); + if (lcd->im_pins) { + gpiod_set_value_cansleep(lcd->im_pins->desc[0], 1); + gpiod_set_value_cansleep(lcd->im_pins->desc[1], 0); + gpiod_set_value_cansleep(lcd->im_pins->desc[2], 1); } ret = hx8357_spi_write_array(lcdev, hx8357_seq_power, @@ -580,6 +579,7 @@ MODULE_DEVICE_TABLE(of, hx8357_dt_ids); static int hx8357_probe(struct spi_device *spi) { + struct device *dev = &spi->dev; struct lcd_device *lcdev; struct hx8357_data *lcd; const struct of_device_id *match; @@ -601,49 +601,19 @@ static int hx8357_probe(struct spi_device *spi) if (!match || !match->data) return -EINVAL; - lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); - if (!gpio_is_valid(lcd->reset)) { - dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); - return -EINVAL; - } + lcd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(lcd->reset)) + return dev_err_probe(dev, PTR_ERR(lcd->reset), "failed to request reset GPIO\n"); + gpiod_set_consumer_name(lcd->reset, "hx8357-reset"); - ret = devm_gpio_request_one(&spi->dev, lcd->reset, - GPIOF_OUT_INIT_HIGH, - "hx8357-reset"); - if (ret) { - dev_err(&spi->dev, - "failed to request gpio %d: %d\n", - lcd->reset, ret); - return -EINVAL; - } + lcd->im_pins = devm_gpiod_get_array_optional(dev, "im", GPIOD_OUT_LOW); + if (IS_ERR(lcd->im_pins)) + return dev_err_probe(dev, PTR_ERR(lcd->im_pins), "failed to request im GPIOs\n"); + if (lcd->im_pins->ndescs < HX8357_NUM_IM_PINS) + return dev_err_probe(dev, -EINVAL, "not enough im GPIOs\n"); - if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) { - lcd->use_im_pins = 1; - - for (i = 0; i < HX8357_NUM_IM_PINS; i++) { - lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node, - "im-gpios", i); - if (lcd->im_pins[i] == -EPROBE_DEFER) { - dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n"); - return -EPROBE_DEFER; - } - if (!gpio_is_valid(lcd->im_pins[i])) { - dev_err(&spi->dev, "Missing dt property: im-gpios\n"); - return -EINVAL; - } - - ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i], - GPIOF_OUT_INIT_LOW, - "im_pins"); - if (ret) { - dev_err(&spi->dev, "failed to request gpio %d: %d\n", - lcd->im_pins[i], ret); - return -EINVAL; - } - } - } else { - lcd->use_im_pins = 0; - } + for (i = 0; i < HX8357_NUM_IM_PINS; i++) + gpiod_set_consumer_name(lcd->im_pins->desc[i], "im_pins"); lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd, &hx8357_ops);
The of_gpio.h is going to be removed. In preparation of that convert the driver to the agnostic API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/gpio/gpiolib-of.c | 4 +- drivers/video/backlight/hx8357.c | 74 ++++++++++---------------------- 2 files changed, 24 insertions(+), 54 deletions(-)