mbox series

[00/13] boards: amlogic: add BananaPi/Radxa/WeTek boards

Message ID 20230323065458.776029-1-christianshewitt@gmail.com (mailing list archive)
Headers show
Series boards: amlogic: add BananaPi/Radxa/WeTek boards | expand

Message

Christian Hewitt March 23, 2023, 6:54 a.m. UTC 
This series adds support for the following boards which are
tested and booting fine with 2023.04-rc4:

- BananaPi M2-Pro (S905X3)
- BananaPi M2S (A311D or S922X)
- Radxa Zero2 (A311D)
- WeTek Hub (S905)
- WeTek Play2 (S905)

I also spotted that bananapi-m5 wasn't referrences in the u200
maintainer file so there's a patch to correct that too.

Christian Hewitt (13):
  docs: boards: amlogic: add bananapi-m5 to u200 maintainer file
  ARM: dts: add support for BananaPi M2-Pro
  boards: add BananaPi M2-Pro defconfig
  docs: boards: amlogic: add documentation for BananaPi M2-Pro
  ARM: dts: add support for BananaPi M2S
  boards: add BananaPi M2S defconfig
  docs: boards: amlogic: add documentation for BananaPi M2S
  ARM: dts: add support for Radxa Zero2
  boards: amlogic: add Radxa Zero2 defconfig
  doc: boards: amlogic: add documentation for Radxa Zero2
  ARM: dts: add support for WeTek Hub and WeTek Play2
  boards: amlogic: add WeTek Hub and WeTek Play2 defconfig
  doc: boards: amlogic: add documentation for WeTek Hub and WeTek Play2

 arch/arm/dts/Makefile                         |   9 +-
 .../arm/dts/meson-g12b-a311d-bananapi-m2s.dts |  33 ++
 arch/arm/dts/meson-g12b-bananapi-u-boot.dtsi  |   7 +
 arch/arm/dts/meson-g12b-bananapi.dtsi         | 521 ++++++++++++++++++
 .../dts/meson-g12b-radxa-zero2-u-boot.dtsi    |   7 +
 arch/arm/dts/meson-g12b-radxa-zero2.dts       | 489 ++++++++++++++++
 .../arm/dts/meson-g12b-s922x-bananapi-m2s.dts |  14 +
 arch/arm/dts/meson-gxbb-wetek-hub.dts         |  58 ++
 arch/arm/dts/meson-gxbb-wetek-play2.dts       | 119 ++++
 arch/arm/dts/meson-gxbb-wetek-u-boot.dtsi     |  13 +
 arch/arm/dts/meson-gxbb-wetek.dtsi            | 292 ++++++++++
 .../dts/meson-sm1-bananapi-m2-pro-u-boot.dtsi |  14 +
 arch/arm/dts/meson-sm1-bananapi-m2-pro.dts    |  97 ++++
 arch/arm/dts/meson-sm1-bananapi-m5.dts        | 427 +-------------
 arch/arm/dts/meson-sm1-bananapi.dtsi          | 435 +++++++++++++++
 board/amlogic/p200/MAINTAINERS                |   4 +
 board/amlogic/u200/MAINTAINERS                |   3 +
 board/amlogic/w400/MAINTAINERS                |   4 +
 configs/bananapi-m2-pro_defconfig             |  76 +++
 configs/bananapi-m2s_defconfig                |  82 +++
 configs/radxa-zero2_defconfig                 |  77 +++
 configs/wetek-hub_defconfig                   |  70 +++
 configs/wetek-play2_defconfig                 |  70 +++
 doc/board/amlogic/bananapi-m2pro.rst          | 142 +++++
 doc/board/amlogic/bananapi-m2s.rst            | 152 +++++
 doc/board/amlogic/index.rst                   |   5 +
 doc/board/amlogic/radxa-zero2.rst             |  79 +++
 doc/board/amlogic/wetek-hub.rst               | 109 ++++
 doc/board/amlogic/wetek-play2.rst             | 114 ++++
 29 files changed, 3094 insertions(+), 428 deletions(-)
 create mode 100644 arch/arm/dts/meson-g12b-a311d-bananapi-m2s.dts
 create mode 100644 arch/arm/dts/meson-g12b-bananapi-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-bananapi.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-radxa-zero2-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-g12b-radxa-zero2.dts
 create mode 100644 arch/arm/dts/meson-g12b-s922x-bananapi-m2s.dts
 create mode 100644 arch/arm/dts/meson-gxbb-wetek-hub.dts
 create mode 100644 arch/arm/dts/meson-gxbb-wetek-play2.dts
 create mode 100644 arch/arm/dts/meson-gxbb-wetek-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-gxbb-wetek.dtsi
 create mode 100644 arch/arm/dts/meson-sm1-bananapi-m2-pro-u-boot.dtsi
 create mode 100644 arch/arm/dts/meson-sm1-bananapi-m2-pro.dts
 create mode 100644 arch/arm/dts/meson-sm1-bananapi.dtsi
 create mode 100644 configs/bananapi-m2-pro_defconfig
 create mode 100644 configs/bananapi-m2s_defconfig
 create mode 100644 configs/radxa-zero2_defconfig
 create mode 100644 configs/wetek-hub_defconfig
 create mode 100644 configs/wetek-play2_defconfig
 create mode 100644 doc/board/amlogic/bananapi-m2pro.rst
 create mode 100644 doc/board/amlogic/bananapi-m2s.rst
 create mode 100644 doc/board/amlogic/radxa-zero2.rst
 create mode 100644 doc/board/amlogic/wetek-hub.rst
 create mode 100644 doc/board/amlogic/wetek-play2.rst

Comments

Christian Hewitt March 23, 2023, 7:04 a.m. UTC | #1 
> On 23 Mar 2023, at 10:54 am, Christian Hewitt via groups.io <christianshewitt=gmail.com@groups.io> wrote:
> 
> Add configurations for the WeTek Hub and WeTek Play2 boards along
> with files for the wetek-gxbb board family to ensure the ethernet
> MAC is correctly discovered. Set myself as the maintainer for the
> board family.

^ should read just "Add configurations for the WeTek Hub and WeTek Play2
boards” as the board-family changes were dropped (not needed). I can
send a v2 for this patch alone (or would you prefer the series?)

Christian

> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> board/amlogic/p200/MAINTAINERS |  2 +
> configs/wetek-hub_defconfig    | 70 ++++++++++++++++++++++++++++++++++
> configs/wetek-play2_defconfig  | 70 ++++++++++++++++++++++++++++++++++
> 3 files changed, 142 insertions(+)
> create mode 100644 configs/wetek-hub_defconfig
> create mode 100644 configs/wetek-play2_defconfig
> 
> diff --git a/board/amlogic/p200/MAINTAINERS b/board/amlogic/p200/MAINTAINERS
> index 33ca3df5c6..264218e3be 100644
> --- a/board/amlogic/p200/MAINTAINERS
> +++ b/board/amlogic/p200/MAINTAINERS
> @@ -7,6 +7,8 @@ F:	board/amlogic/p200/
> F:	configs/nanopi-k2_defconfig
> F:	configs/odroid-c2_defconfig
> F:	configs/p200_defconfig
> +F:	configs/wetek-hub_defconfig
> +F:	configs/wetek-play2_defconfig
> F:	doc/board/amlogic/p200.rst
> F:	doc/board/amlogic/nanopi-k2.rst
> F:	doc/board/amlogic/odroid-c2.rst
> diff --git a/configs/wetek-hub_defconfig b/configs/wetek-hub_defconfig
> new file mode 100644
> index 0000000000..634833f7fe
> --- /dev/null
> +++ b/configs/wetek-hub_defconfig
> @@ -0,0 +1,70 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MESON=y
> +CONFIG_TEXT_BASE=0x01000000
> +CONFIG_SYS_LOAD_ADDR=0x1000000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_DM_GPIO=y
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" wetek-hub"
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-wetek-hub"
> +CONFIG_DEBUG_UART=y
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
> +CONFIG_OF_BOARD_SETUP=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SARADC_MESON=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MESON=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE_MESON8B=y
> +CONFIG_PHY=y
> +CONFIG_MESON_GXBB_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXBB=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_EE_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_SYSINFO=y
> +CONFIG_SYSINFO_SMBIOS=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_VIDEO=y
> +# CONFIG_VIDEO_BPP8 is not set
> +# CONFIG_VIDEO_BPP16 is not set
> +CONFIG_SYS_WHITE_ON_BLACK=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_SPLASH_SCREEN=y
> +CONFIG_SPLASH_SCREEN_ALIGN=y
> +CONFIG_VIDEO_BMP_RLE8=y
> +CONFIG_BMP_16BPP=y
> +CONFIG_BMP_24BPP=y
> +CONFIG_BMP_32BPP=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> diff --git a/configs/wetek-play2_defconfig b/configs/wetek-play2_defconfig
> new file mode 100644
> index 0000000000..6d33b09a94
> --- /dev/null
> +++ b/configs/wetek-play2_defconfig
> @@ -0,0 +1,70 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MESON=y
> +CONFIG_TEXT_BASE=0x01000000
> +CONFIG_SYS_LOAD_ADDR=0x1000000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_DM_GPIO=y
> +CONFIG_DEBUG_UART_BASE=0xc81004c0
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_IDENT_STRING=" wetek-play2"
> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-wetek-play2"
> +CONFIG_DEBUG_UART=y
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
> +CONFIG_OF_BOARD_SETUP=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_MISC_INIT_R=y
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_IMI is not set
> +CONFIG_CMD_ADC=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SARADC_MESON=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MESON=y
> +CONFIG_DM_MMC=y
> +CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE_MESON8B=y
> +CONFIG_PHY=y
> +CONFIG_MESON_GXBB_USB_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_MESON_GXBB=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_MESON_EE_POWER_DOMAIN=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_RESET=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_MESON_SERIAL=y
> +CONFIG_SYSINFO=y
> +CONFIG_SYSINFO_SMBIOS=y
> +CONFIG_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_VIDEO=y
> +# CONFIG_VIDEO_BPP8 is not set
> +# CONFIG_VIDEO_BPP16 is not set
> +CONFIG_SYS_WHITE_ON_BLACK=y
> +CONFIG_VIDEO_MESON=y
> +CONFIG_VIDEO_DT_SIMPLEFB=y
> +CONFIG_SPLASH_SCREEN=y
> +CONFIG_SPLASH_SCREEN_ALIGN=y
> +CONFIG_VIDEO_BMP_RLE8=y
> +CONFIG_BMP_16BPP=y
> +CONFIG_BMP_24BPP=y
> +CONFIG_BMP_32BPP=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> -- 
> 2.34.1
> 
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#1549): https://groups.io/g/u-boot-amlogic/message/1549
> Mute This Topic: https://groups.io/mt/97795985/6407323
> Group Owner: u-boot-amlogic+owner@groups.io
> Unsubscribe: https://groups.io/g/u-boot-amlogic/unsub [christianshewitt@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
> 
>
Neil Armstrong March 23, 2023, 8:52 a.m. UTC | #2 
On 23/03/2023 08:04, Christian Hewitt wrote:
> 
> 
>> On 23 Mar 2023, at 10:54 am, Christian Hewitt via groups.io <christianshewitt=gmail.com@groups.io> wrote:
>>
>> Add configurations for the WeTek Hub and WeTek Play2 boards along
>> with files for the wetek-gxbb board family to ensure the ethernet
>> MAC is correctly discovered. Set myself as the maintainer for the
>> board family.
> 
> ^ should read just "Add configurations for the WeTek Hub and WeTek Play2
> boards” as the board-family changes were dropped (not needed). I can
> send a v2 for this patch alone (or would you prefer the series?)

Please send a v2 of the whole serie including the doc fixes!

Thanks,
Neil

> 
> Christian
> 
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> board/amlogic/p200/MAINTAINERS |  2 +
>> configs/wetek-hub_defconfig    | 70 ++++++++++++++++++++++++++++++++++
>> configs/wetek-play2_defconfig  | 70 ++++++++++++++++++++++++++++++++++
>> 3 files changed, 142 insertions(+)
>> create mode 100644 configs/wetek-hub_defconfig
>> create mode 100644 configs/wetek-play2_defconfig
>>
>> diff --git a/board/amlogic/p200/MAINTAINERS b/board/amlogic/p200/MAINTAINERS
>> index 33ca3df5c6..264218e3be 100644
>> --- a/board/amlogic/p200/MAINTAINERS
>> +++ b/board/amlogic/p200/MAINTAINERS
>> @@ -7,6 +7,8 @@ F:	board/amlogic/p200/
>> F:	configs/nanopi-k2_defconfig
>> F:	configs/odroid-c2_defconfig
>> F:	configs/p200_defconfig
>> +F:	configs/wetek-hub_defconfig
>> +F:	configs/wetek-play2_defconfig
>> F:	doc/board/amlogic/p200.rst
>> F:	doc/board/amlogic/nanopi-k2.rst
>> F:	doc/board/amlogic/odroid-c2.rst
>> diff --git a/configs/wetek-hub_defconfig b/configs/wetek-hub_defconfig
>> new file mode 100644
>> index 0000000000..634833f7fe
>> --- /dev/null
>> +++ b/configs/wetek-hub_defconfig
>> @@ -0,0 +1,70 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_MESON=y
>> +CONFIG_TEXT_BASE=0x01000000
>> +CONFIG_SYS_LOAD_ADDR=0x1000000
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_ENV_SIZE=0x2000
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DEBUG_UART_BASE=0xc81004c0
>> +CONFIG_DEBUG_UART_CLOCK=24000000
>> +CONFIG_IDENT_STRING=" wetek-hub"
>> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-wetek-hub"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
>> +CONFIG_OF_BOARD_SETUP=y
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +CONFIG_MISC_INIT_R=y
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_IMI is not set
>> +CONFIG_CMD_ADC=y
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_I2C=y
>> +# CONFIG_CMD_LOADS is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_USB=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_REGULATOR=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_SARADC_MESON=y
>> +CONFIG_DM_I2C=y
>> +CONFIG_SYS_I2C_MESON=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_MMC_MESON_GX=y
>> +CONFIG_PHY_REALTEK=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_ETH_DESIGNWARE_MESON8B=y
>> +CONFIG_PHY=y
>> +CONFIG_MESON_GXBB_USB_PHY=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCTRL_MESON_GXBB=y
>> +CONFIG_POWER_DOMAIN=y
>> +CONFIG_MESON_EE_POWER_DOMAIN=y
>> +CONFIG_DM_REGULATOR=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_REGULATOR_GPIO=y
>> +CONFIG_DM_RESET=y
>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>> +CONFIG_DEBUG_UART_SKIP_INIT=y
>> +CONFIG_MESON_SERIAL=y
>> +CONFIG_SYSINFO=y
>> +CONFIG_SYSINFO_SMBIOS=y
>> +CONFIG_USB=y
>> +CONFIG_DM_USB=y
>> +CONFIG_USB_DWC2=y
>> +CONFIG_USB_KEYBOARD=y
>> +CONFIG_VIDEO=y
>> +# CONFIG_VIDEO_BPP8 is not set
>> +# CONFIG_VIDEO_BPP16 is not set
>> +CONFIG_SYS_WHITE_ON_BLACK=y
>> +CONFIG_VIDEO_MESON=y
>> +CONFIG_VIDEO_DT_SIMPLEFB=y
>> +CONFIG_SPLASH_SCREEN=y
>> +CONFIG_SPLASH_SCREEN_ALIGN=y
>> +CONFIG_VIDEO_BMP_RLE8=y
>> +CONFIG_BMP_16BPP=y
>> +CONFIG_BMP_24BPP=y
>> +CONFIG_BMP_32BPP=y
>> +CONFIG_OF_LIBFDT_OVERLAY=y
>> diff --git a/configs/wetek-play2_defconfig b/configs/wetek-play2_defconfig
>> new file mode 100644
>> index 0000000000..6d33b09a94
>> --- /dev/null
>> +++ b/configs/wetek-play2_defconfig
>> @@ -0,0 +1,70 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_MESON=y
>> +CONFIG_TEXT_BASE=0x01000000
>> +CONFIG_SYS_LOAD_ADDR=0x1000000
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_ENV_SIZE=0x2000
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DEBUG_UART_BASE=0xc81004c0
>> +CONFIG_DEBUG_UART_CLOCK=24000000
>> +CONFIG_IDENT_STRING=" wetek-play2"
>> +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-wetek-play2"
>> +CONFIG_DEBUG_UART=y
>> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
>> +CONFIG_OF_BOARD_SETUP=y
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +CONFIG_MISC_INIT_R=y
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_IMI is not set
>> +CONFIG_CMD_ADC=y
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_I2C=y
>> +# CONFIG_CMD_LOADS is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_USB=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_REGULATOR=y
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_SARADC_MESON=y
>> +CONFIG_DM_I2C=y
>> +CONFIG_SYS_I2C_MESON=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_MMC_MESON_GX=y
>> +CONFIG_PHY_REALTEK=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_ETH_DESIGNWARE_MESON8B=y
>> +CONFIG_PHY=y
>> +CONFIG_MESON_GXBB_USB_PHY=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_PINCTRL_MESON_GXBB=y
>> +CONFIG_POWER_DOMAIN=y
>> +CONFIG_MESON_EE_POWER_DOMAIN=y
>> +CONFIG_DM_REGULATOR=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_REGULATOR_GPIO=y
>> +CONFIG_DM_RESET=y
>> +CONFIG_DEBUG_UART_ANNOUNCE=y
>> +CONFIG_DEBUG_UART_SKIP_INIT=y
>> +CONFIG_MESON_SERIAL=y
>> +CONFIG_SYSINFO=y
>> +CONFIG_SYSINFO_SMBIOS=y
>> +CONFIG_USB=y
>> +CONFIG_DM_USB=y
>> +CONFIG_USB_DWC2=y
>> +CONFIG_USB_KEYBOARD=y
>> +CONFIG_VIDEO=y
>> +# CONFIG_VIDEO_BPP8 is not set
>> +# CONFIG_VIDEO_BPP16 is not set
>> +CONFIG_SYS_WHITE_ON_BLACK=y
>> +CONFIG_VIDEO_MESON=y
>> +CONFIG_VIDEO_DT_SIMPLEFB=y
>> +CONFIG_SPLASH_SCREEN=y
>> +CONFIG_SPLASH_SCREEN_ALIGN=y
>> +CONFIG_VIDEO_BMP_RLE8=y
>> +CONFIG_BMP_16BPP=y
>> +CONFIG_BMP_24BPP=y
>> +CONFIG_BMP_32BPP=y
>> +CONFIG_OF_LIBFDT_OVERLAY=y
>> -- 
>> 2.34.1
>>
>>
>>
>>
>>
>>
> 
> 
> 
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#1551): https://groups.io/g/u-boot-amlogic/message/1551
> Mute This Topic: https://groups.io/mt/97796064/900740
> Group Owner: u-boot-amlogic+owner@groups.io
> Unsubscribe: https://groups.io/g/u-boot-amlogic/unsub [neil.armstrong@linaro.org]
> -=-=-=-=-=-=-=-=-=-=-=-
> 
>