| Message ID | 20230203-evk-board-support-v3-11-0003e80e0095@baylibre.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Improve the MT8365 SoC and EVK board support | expand |
Il 29/03/23 10:54, Alexandre Mergnat ha scritto: > This patch add support for SuperSpeed USB, in OTG mode, on micro connector. > It also add support for the Extensible Host Controller Interface USB. > > Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> > --- > arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > index 22ec332fe9c9..868ee0d160e4 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > @@ -319,6 +319,28 @@ &pwm { > status = "okay"; > }; > > +&ssusb { > + pinctrl-0 = <&usb_pins>; > + pinctrl-names = "default"; > + maximum-speed = "high-speed"; > + usb-role-switch; > + dr_mode = "otg"; > + vusb33-supply = <&mt6357_vusb33_reg>; > + status = "okay"; Order by name please. P.S.: status can go at the bottom, even if v < s :-) Thanks, Angelo
On 29/03/2023 15:26, AngeloGioacchino Del Regno wrote: > Il 29/03/23 10:54, Alexandre Mergnat ha scritto: >> This patch add support for SuperSpeed USB, in OTG mode, on micro connector. >> It also add support for the Extensible Host Controller Interface USB. >> >> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> >> --- >> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts >> b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts >> index 22ec332fe9c9..868ee0d160e4 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts >> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts >> @@ -319,6 +319,28 @@ &pwm { >> status = "okay"; >> }; >> +&ssusb { >> + pinctrl-0 = <&usb_pins>; >> + pinctrl-names = "default"; >> + maximum-speed = "high-speed"; >> + usb-role-switch; >> + dr_mode = "otg"; >> + vusb33-supply = <&mt6357_vusb33_reg>; >> + status = "okay"; > > Order by name please. > > P.S.: status can go at the bottom, even if v < s :-) You mean v > s ;-) Yes please reorder keep the status to the bottom that's somehow identical throughout the kernel. Regards, Matthias > > Thanks, > Angelo
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 22ec332fe9c9..868ee0d160e4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -319,6 +319,28 @@ &pwm { status = "okay"; }; +&ssusb { + pinctrl-0 = <&usb_pins>; + pinctrl-names = "default"; + maximum-speed = "high-speed"; + usb-role-switch; + dr_mode = "otg"; + vusb33-supply = <&mt6357_vusb33_reg>; + status = "okay"; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_otg_vbus>; + }; +}; + +&usb_host { + vusb33-supply = <&mt6357_vusb33_reg>; + status = "okay"; +}; + &uart0 { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default";
This patch add support for SuperSpeed USB, in OTG mode, on micro connector. It also add support for the Extensible Host Controller Interface USB. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)