| Message ID | 20230330113630.1388860-18-ming.lei@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | io_uring/ublk: add generic IORING_OP_FUSED_CMD | expand |
On 3/30/23 13:36, Ming Lei wrote: > Apply io_uring fused command for supporting zero copy: > > 1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and deinit it > in ublk_unmap_io(), and this buffer is immutable, so it is just fine to > retrieve it from concurrent fused command. > > 1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this > fused cmd(zero copy) buffer > > 2) call io_fused_cmd_start_secondary_req() to provide buffer to secondary > request and submit secondary request; meantime setup complete callback via > this API, once secondary request is completed, the complete callback is > called for freeing the buffer and completing the fused command > > Also request reference is held during fused command lifetime, and this way > guarantees that request buffer won't be freed until all inflight fused > commands are completed. > > userspace(only implement sqe128 fused command): > > https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-for-v6 > > liburing test(only implement normal sqe fused command: two 64byte SQEs) > > https://github.com/ming1/liburing/tree/fused_cmd_miniublk_for_v6 > > Signed-off-by: Ming Lei <ming.lei@redhat.com> > --- > Documentation/block/ublk.rst | 126 ++++++++++++++++++++-- > drivers/block/ublk_drv.c | 192 ++++++++++++++++++++++++++++++++-- > include/uapi/linux/ublk_cmd.h | 6 +- > 3 files changed, 303 insertions(+), 21 deletions(-) > > diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst > index 1713b2890abb..7b7aa24e9729 100644 > --- a/Documentation/block/ublk.rst > +++ b/Documentation/block/ublk.rst > @@ -297,18 +297,126 @@ with specified IO tag in the command data: > ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy > the server buffer (pages) read to the IO request pages. > > -Future development > -================== > +- ``UBLK_IO_FUSED_SUBMIT_IO`` > + > + Used for implementing zero copy feature. > + > + It has to been the primary command of io_uring fused command. This command s/been/be/ ? > + submits the generic secondary IO request with io buffer provided by our primary > + command, and won't be completed until the secondary request is done. > + > + The provided buffer is represented as ``io_uring_bvec_buf``, which is > + actually ublk request buffer's reference, and the reference is shared & > + read-only, so the generic secondary request can retrieve any part of the buffer > + by passing buffer offset & length. > > Zero copy > ---------- > +========= > + > +What is zero copy? > +------------------ > + > +When application submits IO to ``/dev/ublkb*``, userspace buffer(direct io) > +or page cache buffer(buffered io) or kernel buffer(meta io often) is used > +for submitting data to ublk driver, and all kinds of these buffers are > +represented by bio/bvecs(ublk request buffer) finally. Before supporting > +zero copy, data in these buffers has to be copied to ublk server userspace > +buffer before handling WRITE IO, or after handing READ IO, so that ublk > +server can handle IO for ``/dev/ublkb*`` with the copied data. > + > +The extra copy between ublk request buffer and ublk server userspace buffer > +not only increases CPU utilization(such as pinning pages, copy data), but > +also consumes memory bandwidth, and the cost could be very big when IO size > +is big. It is observed that ublk-null IOPS may be increased to ~5X if the > +extra copy can be avoided. > + > +So zero copy is very important for supporting high performance block device > +in userspace. > + > +Technical requirements > +---------------------- > + > +- ublk request buffer use > + > +ublk request buffer is represented by bio/bvec, which is immutable, so do > +not try to change bvec via buffer reference; data can be read from or > +written to the buffer according to buffer direction, but bvec can't be > +changed > + > +- buffer lifetime > + > +Ublk server borrows ublk request buffer for handling ublk IO, ublk request > +buffer reference is used. Reference can't outlive the referent buffer. That > +means all request buffer references have to be released by ublk server > +before ublk driver completes this request, when request buffer ownership > +is transferred to upper layer(FS, application, ...). > + > +Also after ublk request is completed, any page belonging to this ublk > +request can not be written or read any more from ublk server since it is > +one block device from kernel viewpoint. > + > +- buffer direction > + > +For ublk WRITE request, ublk request buffer should only be accessed as data > +source, and the buffer can't be written by ublk server > + > +For ublk READ request, ublk request buffer should only be accessed as data > +destination, and the buffer can't be read by ublk server, otherwise kernel > +data is leaked to ublk server, which can be unprivileged application. > + > +- arbitrary size sub-buffer needs to be retrieved from ublk server > + > +ublk is one generic framework for implementing block device in userspace, > +and typical requirements include logical volume manager(mirror, stripped, ...), > +distributed network storage, compressed target, ... > + > +ublk server needs to retrieve arbitrary size sub-buffer of ublk request, and > +ublk server needs to submit IOs with these sub-buffer(s). That also means > +arbitrary size sub-buffer(s) can be used to submit IO multiple times. > + > +Any sub-buffer is actually one reference of ublk request buffer, which > +ownership can't be transferred to upper layer if any reference is held > +by ublk server. > + > +Why slice isn't good for ublk zero copy slice > +--------------------------------------- > + > +- spliced page from ->splice_read() can't be written > + > +ublk READ request can't be handled because spliced page can't be written to, and > +extending splice for ublk zero copy isn't one good solution [#splice_extend]_ > + > +- it is very hard to meet above requirements wrt. request buffer lifetime > + > +splice/pipe focuses on page reference lifetime, but ublk zero copy pays more > +attention to ublk request buffer lifetime. If is very inefficient to respect > +request buffer lifetime by using all pipe buffer's ->release() which requires > +all pipe buffers and pipe to be kept when ublk server handles IO. That means > +one single dedicated ``pipe_inode_info`` has to be allocated runtime for each > +provided buffer, and the pipe needs to be populated with pages in ublk request > +buffer. > + > + > +io_uring fused command based zero copy > +-------------------------------------- > + > +io_uring fused command includes one primary command(uring command) and one > +generic secondary request. The primary command is responsible for submitting > +secondary request with provided buffer from ublk request, and primary command > +won't be completed until the secondary request is completed. > + > +Typical ublk IO handling includes network and FS IO, so it is usual enough > +for io_uring net & fs to support IO with provided buffer from primary command. > > -Zero copy is a generic requirement for nbd, fuse or similar drivers. A Maybe replace 'requirement' with "very useful"? It works without zc, just with limited performance. > -problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace > -can't be remapped any more in kernel with existing mm interfaces. This can > -occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that > -big requests (IO size >= 256 KB) may benefit a lot from zero copy. > +Once primary command is submitted successfully, ublk driver guarantees that > +the ublk request buffer won't be gone away since secondary request actually > +grabs the buffer's reference. This way also guarantees that multiple > +concurrent fused commands associated with same request buffer works fine, > +as the provided buffer reference is shared & read-only. > > +Also buffer usage direction flag is passed to primary command from userspace, > +so ublk driver can validate if it is legal to use buffer with requested > +direction. > > References > ========== > @@ -323,4 +431,4 @@ References > > .. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > > -.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > +.. [#splice_extend] https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/ Any chance you could add a few code path into this document? For example as in Documentation/filesystems/fuse.rst, section "Kernel - userspace interface"
On 3/30/23 13:36, Ming Lei wrote: > Apply io_uring fused command for supporting zero copy: > > 1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and deinit it > in ublk_unmap_io(), and this buffer is immutable, so it is just fine to > retrieve it from concurrent fused command. > > 1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this > fused cmd(zero copy) buffer > > 2) call io_fused_cmd_start_secondary_req() to provide buffer to secondary > request and submit secondary request; meantime setup complete callback via > this API, once secondary request is completed, the complete callback is > called for freeing the buffer and completing the fused command > > Also request reference is held during fused command lifetime, and this way > guarantees that request buffer won't be freed until all inflight fused > commands are completed. > > userspace(only implement sqe128 fused command): > > https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-for-v6 > > liburing test(only implement normal sqe fused command: two 64byte SQEs) > > https://github.com/ming1/liburing/tree/fused_cmd_miniublk_for_v6 > > Signed-off-by: Ming Lei <ming.lei@redhat.com> > --- > Documentation/block/ublk.rst | 126 ++++++++++++++++++++-- > drivers/block/ublk_drv.c | 192 ++++++++++++++++++++++++++++++++-- > include/uapi/linux/ublk_cmd.h | 6 +- > 3 files changed, 303 insertions(+), 21 deletions(-) > > diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst > index 1713b2890abb..7b7aa24e9729 100644 > --- a/Documentation/block/ublk.rst > +++ b/Documentation/block/ublk.rst > @@ -297,18 +297,126 @@ with specified IO tag in the command data: > ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy > the server buffer (pages) read to the IO request pages. > > -Future development > -================== > +- ``UBLK_IO_FUSED_SUBMIT_IO`` > + > + Used for implementing zero copy feature. > + > + It has to been the primary command of io_uring fused command. This command > + submits the generic secondary IO request with io buffer provided by our primary > + command, and won't be completed until the secondary request is done. > + > + The provided buffer is represented as ``io_uring_bvec_buf``, which is > + actually ublk request buffer's reference, and the reference is shared & > + read-only, so the generic secondary request can retrieve any part of the buffer > + by passing buffer offset & length. > > Zero copy > ---------- > +========= > + > +What is zero copy? > +------------------ > + > +When application submits IO to ``/dev/ublkb*``, userspace buffer(direct io) > +or page cache buffer(buffered io) or kernel buffer(meta io often) is used > +for submitting data to ublk driver, and all kinds of these buffers are > +represented by bio/bvecs(ublk request buffer) finally. Before supporting > +zero copy, data in these buffers has to be copied to ublk server userspace > +buffer before handling WRITE IO, or after handing READ IO, so that ublk > +server can handle IO for ``/dev/ublkb*`` with the copied data. > + > +The extra copy between ublk request buffer and ublk server userspace buffer > +not only increases CPU utilization(such as pinning pages, copy data), but > +also consumes memory bandwidth, and the cost could be very big when IO size > +is big. It is observed that ublk-null IOPS may be increased to ~5X if the > +extra copy can be avoided. > + > +So zero copy is very important for supporting high performance block device > +in userspace. > + > +Technical requirements > +---------------------- > + > +- ublk request buffer use > + > +ublk request buffer is represented by bio/bvec, which is immutable, so do > +not try to change bvec via buffer reference; data can be read from or > +written to the buffer according to buffer direction, but bvec can't be > +changed > + > +- buffer lifetime > + > +Ublk server borrows ublk request buffer for handling ublk IO, ublk request > +buffer reference is used. Reference can't outlive the referent buffer. That > +means all request buffer references have to be released by ublk server > +before ublk driver completes this request, when request buffer ownership > +is transferred to upper layer(FS, application, ...). > + > +Also after ublk request is completed, any page belonging to this ublk > +request can not be written or read any more from ublk server since it is > +one block device from kernel viewpoint. > + > +- buffer direction > + > +For ublk WRITE request, ublk request buffer should only be accessed as data > +source, and the buffer can't be written by ublk server > + > +For ublk READ request, ublk request buffer should only be accessed as data > +destination, and the buffer can't be read by ublk server, otherwise kernel > +data is leaked to ublk server, which can be unprivileged application. > + > +- arbitrary size sub-buffer needs to be retrieved from ublk server > + > +ublk is one generic framework for implementing block device in userspace, > +and typical requirements include logical volume manager(mirror, stripped, ...), > +distributed network storage, compressed target, ... > + > +ublk server needs to retrieve arbitrary size sub-buffer of ublk request, and > +ublk server needs to submit IOs with these sub-buffer(s). That also means > +arbitrary size sub-buffer(s) can be used to submit IO multiple times. > + > +Any sub-buffer is actually one reference of ublk request buffer, which > +ownership can't be transferred to upper layer if any reference is held > +by ublk server. > + > +Why slice isn't good for ublk zero copy > +--------------------------------------- > + > +- spliced page from ->splice_read() can't be written > + > +ublk READ request can't be handled because spliced page can't be written to, and > +extending splice for ublk zero copy isn't one good solution [#splice_extend]_ > + > +- it is very hard to meet above requirements wrt. request buffer lifetime > + > +splice/pipe focuses on page reference lifetime, but ublk zero copy pays more > +attention to ublk request buffer lifetime. If is very inefficient to respect > +request buffer lifetime by using all pipe buffer's ->release() which requires > +all pipe buffers and pipe to be kept when ublk server handles IO. That means > +one single dedicated ``pipe_inode_info`` has to be allocated runtime for each > +provided buffer, and the pipe needs to be populated with pages in ublk request > +buffer. > + > + > +io_uring fused command based zero copy > +-------------------------------------- > + > +io_uring fused command includes one primary command(uring command) and one > +generic secondary request. The primary command is responsible for submitting > +secondary request with provided buffer from ublk request, and primary command > +won't be completed until the secondary request is completed. > + > +Typical ublk IO handling includes network and FS IO, so it is usual enough > +for io_uring net & fs to support IO with provided buffer from primary command. > > -Zero copy is a generic requirement for nbd, fuse or similar drivers. A > -problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace > -can't be remapped any more in kernel with existing mm interfaces. This can > -occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that > -big requests (IO size >= 256 KB) may benefit a lot from zero copy. > +Once primary command is submitted successfully, ublk driver guarantees that > +the ublk request buffer won't be gone away since secondary request actually > +grabs the buffer's reference. This way also guarantees that multiple > +concurrent fused commands associated with same request buffer works fine, > +as the provided buffer reference is shared & read-only. > > +Also buffer usage direction flag is passed to primary command from userspace, > +so ublk driver can validate if it is legal to use buffer with requested > +direction. > > References > ========== > @@ -323,4 +431,4 @@ References > > .. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > > -.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > +.. [#splice_extend] https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/ > diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c > index a744d3b5da91..64b0408873f6 100644 > --- a/drivers/block/ublk_drv.c > +++ b/drivers/block/ublk_drv.c > @@ -74,10 +74,15 @@ struct ublk_rq_data { > * successfully > */ > struct kref ref; > + bool allocated_bvec; > + struct io_uring_bvec_buf buf[0]; > }; > > struct ublk_uring_cmd_pdu { > - struct ublk_queue *ubq; > + union { > + struct ublk_queue *ubq; > + struct request *req; > + }; > }; > > /* > @@ -565,6 +570,69 @@ static size_t ublk_copy_user_pages(const struct request *req, > return done; > } > > +/* > + * The built command buffer is immutable, so it is fine to feed it to > + * concurrent io_uring fused commands > + */ > +static int ublk_init_zero_copy_buffer(struct request *rq) > +{ > + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); > + struct io_uring_bvec_buf *imu = data->buf; > + struct req_iterator rq_iter; > + unsigned int nr_bvecs = 0; > + struct bio_vec *bvec; > + unsigned int offset; > + struct bio_vec bv; > + > + if (!ublk_rq_has_data(rq)) > + goto exit; > + > + rq_for_each_bvec(bv, rq, rq_iter) > + nr_bvecs++; > + > + if (!nr_bvecs) > + goto exit; > + > + if (rq->bio != rq->biotail) { > + int idx = 0; > + > + bvec = kvmalloc_array(nr_bvecs, sizeof(struct bio_vec), > + GFP_NOIO); > + if (!bvec) > + return -ENOMEM; > + > + offset = 0; > + rq_for_each_bvec(bv, rq, rq_iter) > + bvec[idx++] = bv; > + data->allocated_bvec = true; > + } else { > + struct bio *bio = rq->bio; > + > + offset = bio->bi_iter.bi_bvec_done; > + bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter); > + } > + imu->bvec = bvec; > + imu->nr_bvecs = nr_bvecs; > + imu->offset = offset; > + imu->len = blk_rq_bytes(rq); > + > + return 0; > +exit: > + imu->bvec = NULL; > + return 0; > +} > + > +static void ublk_deinit_zero_copy_buffer(struct request *rq) > +{ > + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); > + struct io_uring_bvec_buf *imu = data->buf; > + > + if (data->allocated_bvec) { > + kvfree(imu->bvec); > + data->allocated_bvec = false; > + } > +} > + > static inline bool ublk_need_map_req(const struct request *req) > { > return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE; > @@ -575,11 +643,23 @@ static inline bool ublk_need_unmap_req(const struct request *req) > return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ; > } > > -static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req, > +static int ublk_map_io(const struct ublk_queue *ubq, struct request *req, > struct ublk_io *io) > { > const unsigned int rq_bytes = blk_rq_bytes(req); > > + if (ublk_support_zc(ubq)) { > + int ret = ublk_init_zero_copy_buffer(req); > + > + /* > + * The only failure is -ENOMEM for allocating fused cmd > + * buffer, return zero so that we can requeue this req. > + */ > + if (unlikely(ret)) > + return 0; > + return rq_bytes; > + } > + > /* > * no zero copy, we delay copy WRITE request data into ublksrv > * context and the big benefit is that pinning pages in current > @@ -599,11 +679,17 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req, > } > > static int ublk_unmap_io(const struct ublk_queue *ubq, > - const struct request *req, > + struct request *req, > struct ublk_io *io) > { > const unsigned int rq_bytes = blk_rq_bytes(req); > > + if (ublk_support_zc(ubq)) { > + ublk_deinit_zero_copy_buffer(req); > + > + return rq_bytes; > + } > + > if (ublk_need_unmap_req(req)) { > struct iov_iter iter; > struct iovec iov; > @@ -687,6 +773,12 @@ static inline struct ublk_uring_cmd_pdu *ublk_get_uring_cmd_pdu( > return (struct ublk_uring_cmd_pdu *)&ioucmd->pdu; > } > > +static inline struct ublk_uring_cmd_pdu *ublk_get_uring_fused_cmd_pdu( > + struct io_uring_cmd *ioucmd) > +{ > + return (struct ublk_uring_cmd_pdu *)&ioucmd->fused.pdu; > +} > + > static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq) > { > return ubq->ubq_daemon->flags & PF_EXITING; > @@ -742,6 +834,7 @@ static inline void __ublk_complete_rq(struct request *req) > > return; > exit: > + ublk_deinit_zero_copy_buffer(req); > blk_mq_end_request(req, res); > } > > @@ -1352,6 +1445,68 @@ static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub, > return NULL; > } > > +static void ublk_fused_cmd_done_cb(struct io_uring_cmd *cmd, > + unsigned issue_flags) > +{ > + struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd); > + struct request *req = pdu->req; > + struct ublk_queue *ubq = req->mq_hctx->driver_data; > + > + ublk_put_req_ref(ubq, req); > + io_uring_cmd_done(cmd, 0, 0, issue_flags); > +} > + > +static inline bool ublk_check_fused_buf_dir(const struct request *req, > + unsigned int flags) > +{ > + flags &= IO_URING_F_FUSED_BUF; ~IO_URING_F_FUSED_BUF ?
On Fri, Mar 31, 2023 at 07:13:21PM +0000, Bernd Schubert wrote: > On 3/30/23 13:36, Ming Lei wrote: > > Apply io_uring fused command for supporting zero copy: > > > > 1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and deinit it > > in ublk_unmap_io(), and this buffer is immutable, so it is just fine to > > retrieve it from concurrent fused command. > > > > 1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this > > fused cmd(zero copy) buffer > > > > 2) call io_fused_cmd_start_secondary_req() to provide buffer to secondary > > request and submit secondary request; meantime setup complete callback via > > this API, once secondary request is completed, the complete callback is > > called for freeing the buffer and completing the fused command > > > > Also request reference is held during fused command lifetime, and this way > > guarantees that request buffer won't be freed until all inflight fused > > commands are completed. > > > > userspace(only implement sqe128 fused command): > > > > https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-for-v6 > > > > liburing test(only implement normal sqe fused command: two 64byte SQEs) > > > > https://github.com/ming1/liburing/tree/fused_cmd_miniublk_for_v6 > > > > Signed-off-by: Ming Lei <ming.lei@redhat.com> > > --- > > Documentation/block/ublk.rst | 126 ++++++++++++++++++++-- > > drivers/block/ublk_drv.c | 192 ++++++++++++++++++++++++++++++++-- > > include/uapi/linux/ublk_cmd.h | 6 +- > > 3 files changed, 303 insertions(+), 21 deletions(-) > > > > diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst > > index 1713b2890abb..7b7aa24e9729 100644 > > --- a/Documentation/block/ublk.rst > > +++ b/Documentation/block/ublk.rst > > @@ -297,18 +297,126 @@ with specified IO tag in the command data: > > ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy > > the server buffer (pages) read to the IO request pages. > > > > -Future development > > -================== > > +- ``UBLK_IO_FUSED_SUBMIT_IO`` > > + > > + Used for implementing zero copy feature. > > + > > + It has to been the primary command of io_uring fused command. This command > > s/been/be/ ? Yeah. > > > + submits the generic secondary IO request with io buffer provided by our primary > > + command, and won't be completed until the secondary request is done. > > + > > + The provided buffer is represented as ``io_uring_bvec_buf``, which is > > + actually ublk request buffer's reference, and the reference is shared & > > + read-only, so the generic secondary request can retrieve any part of the buffer > > + by passing buffer offset & length. > > > > Zero copy > > ---------- > > +========= > > + > > +What is zero copy? > > +------------------ > > + > > +When application submits IO to ``/dev/ublkb*``, userspace buffer(direct io) > > +or page cache buffer(buffered io) or kernel buffer(meta io often) is used > > +for submitting data to ublk driver, and all kinds of these buffers are > > +represented by bio/bvecs(ublk request buffer) finally. Before supporting > > +zero copy, data in these buffers has to be copied to ublk server userspace > > +buffer before handling WRITE IO, or after handing READ IO, so that ublk > > +server can handle IO for ``/dev/ublkb*`` with the copied data. > > + > > +The extra copy between ublk request buffer and ublk server userspace buffer > > +not only increases CPU utilization(such as pinning pages, copy data), but > > +also consumes memory bandwidth, and the cost could be very big when IO size > > +is big. It is observed that ublk-null IOPS may be increased to ~5X if the > > +extra copy can be avoided. > > + > > +So zero copy is very important for supporting high performance block device > > +in userspace. > > + > > +Technical requirements > > +---------------------- > > + > > +- ublk request buffer use > > + > > +ublk request buffer is represented by bio/bvec, which is immutable, so do > > +not try to change bvec via buffer reference; data can be read from or > > +written to the buffer according to buffer direction, but bvec can't be > > +changed > > + > > +- buffer lifetime > > + > > +Ublk server borrows ublk request buffer for handling ublk IO, ublk request > > +buffer reference is used. Reference can't outlive the referent buffer. That > > +means all request buffer references have to be released by ublk server > > +before ublk driver completes this request, when request buffer ownership > > +is transferred to upper layer(FS, application, ...). > > + > > +Also after ublk request is completed, any page belonging to this ublk > > +request can not be written or read any more from ublk server since it is > > +one block device from kernel viewpoint. > > + > > +- buffer direction > > + > > +For ublk WRITE request, ublk request buffer should only be accessed as data > > +source, and the buffer can't be written by ublk server > > + > > +For ublk READ request, ublk request buffer should only be accessed as data > > +destination, and the buffer can't be read by ublk server, otherwise kernel > > +data is leaked to ublk server, which can be unprivileged application. > > + > > +- arbitrary size sub-buffer needs to be retrieved from ublk server > > + > > +ublk is one generic framework for implementing block device in userspace, > > +and typical requirements include logical volume manager(mirror, stripped, ...), > > +distributed network storage, compressed target, ... > > + > > +ublk server needs to retrieve arbitrary size sub-buffer of ublk request, and > > +ublk server needs to submit IOs with these sub-buffer(s). That also means > > +arbitrary size sub-buffer(s) can be used to submit IO multiple times. > > + > > +Any sub-buffer is actually one reference of ublk request buffer, which > > +ownership can't be transferred to upper layer if any reference is held > > +by ublk server. > > + > > +Why slice isn't good for ublk zero copy > > slice Good catch. > > > +--------------------------------------- > > + > > +- spliced page from ->splice_read() can't be written > > + > > +ublk READ request can't be handled because spliced page can't be written to, and > > +extending splice for ublk zero copy isn't one good solution [#splice_extend]_ > > + > > +- it is very hard to meet above requirements wrt. request buffer lifetime > > + > > +splice/pipe focuses on page reference lifetime, but ublk zero copy pays more > > +attention to ublk request buffer lifetime. If is very inefficient to respect > > +request buffer lifetime by using all pipe buffer's ->release() which requires > > +all pipe buffers and pipe to be kept when ublk server handles IO. That means > > +one single dedicated ``pipe_inode_info`` has to be allocated runtime for each > > +provided buffer, and the pipe needs to be populated with pages in ublk request > > +buffer. > > + > > + > > +io_uring fused command based zero copy > > +-------------------------------------- > > + > > +io_uring fused command includes one primary command(uring command) and one > > +generic secondary request. The primary command is responsible for submitting > > +secondary request with provided buffer from ublk request, and primary command > > +won't be completed until the secondary request is completed. > > + > > +Typical ublk IO handling includes network and FS IO, so it is usual enough > > +for io_uring net & fs to support IO with provided buffer from primary command. > > > > -Zero copy is a generic requirement for nbd, fuse or similar drivers. A > > Maybe replace 'requirement' with "very useful"? It works without zc, > just with limited performance. OK, also it has been observed that the extra copy affects performance a log for big IO size(64K+). > > > -problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace > > -can't be remapped any more in kernel with existing mm interfaces. This can > > -occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that > > -big requests (IO size >= 256 KB) may benefit a lot from zero copy. > > +Once primary command is submitted successfully, ublk driver guarantees that > > +the ublk request buffer won't be gone away since secondary request actually > > +grabs the buffer's reference. This way also guarantees that multiple > > +concurrent fused commands associated with same request buffer works fine, > > +as the provided buffer reference is shared & read-only. > > > > +Also buffer usage direction flag is passed to primary command from userspace, > > +so ublk driver can validate if it is legal to use buffer with requested > > +direction. > > > > References > > ========== > > @@ -323,4 +431,4 @@ References > > > > .. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > > > > -.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ > > +.. [#splice_extend] https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/ > > > Any chance you could add a few code path into this document? For example > as in Documentation/filesystems/fuse.rst, > section "Kernel - userspace interface" OK, just it isn't handy to describe the flow by pure text. BTW, you can also see the code path in the link: https://github.com/ming1/ubdsrv/blob/master/doc/ublk_intro.pdf thanks, Ming
On Fri, Mar 31, 2023 at 07:55:30PM +0000, Bernd Schubert wrote: > On 3/30/23 13:36, Ming Lei wrote: ... > > +static inline bool ublk_check_fused_buf_dir(const struct request *req, > > + unsigned int flags) > > +{ > > + flags &= IO_URING_F_FUSED_BUF; > > ~IO_URING_F_FUSED_BUF ? IO_URING_F_FUSED_BUF is buffer direction mask, and we can get direction flags only in above way, so the above is correct. Thanks, Ming
On 3/31/23 21:55, Bernd Schubert wrote: > On 3/30/23 13:36, Ming Lei wrote: >> Apply io_uring fused command for supporting zero copy: >> >> 1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and >> deinit it >> in ublk_unmap_io(), and this buffer is immutable, so it is just fine to >> retrieve it from concurrent fused command. >> >> 1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this >> fused cmd(zero copy) buffer >> >> 2) call io_fused_cmd_start_secondary_req() to provide buffer to secondary >> request and submit secondary request; meantime setup complete callback >> via >> this API, once secondary request is completed, the complete callback is >> called for freeing the buffer and completing the fused command >> >> Also request reference is held during fused command lifetime, and this >> way >> guarantees that request buffer won't be freed until all inflight fused >> commands are completed. >> >> userspace(only implement sqe128 fused command): >> >> https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-for-v6 >> >> liburing test(only implement normal sqe fused command: two 64byte SQEs) >> >> https://github.com/ming1/liburing/tree/fused_cmd_miniublk_for_v6 >> >> Signed-off-by: Ming Lei <ming.lei@redhat.com> >> --- >> Documentation/block/ublk.rst | 126 ++++++++++++++++++++-- >> drivers/block/ublk_drv.c | 192 ++++++++++++++++++++++++++++++++-- >> include/uapi/linux/ublk_cmd.h | 6 +- >> 3 files changed, 303 insertions(+), 21 deletions(-) >> >> diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst >> index 1713b2890abb..7b7aa24e9729 100644 >> --- a/Documentation/block/ublk.rst >> +++ b/Documentation/block/ublk.rst >> @@ -297,18 +297,126 @@ with specified IO tag in the command data: >> ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy >> the server buffer (pages) read to the IO request pages. >> -Future development >> -================== >> +- ``UBLK_IO_FUSED_SUBMIT_IO`` >> + >> + Used for implementing zero copy feature. >> + >> + It has to been the primary command of io_uring fused command. This >> command >> + submits the generic secondary IO request with io buffer provided by >> our primary >> + command, and won't be completed until the secondary request is done. >> + >> + The provided buffer is represented as ``io_uring_bvec_buf``, which is >> + actually ublk request buffer's reference, and the reference is >> shared & >> + read-only, so the generic secondary request can retrieve any part >> of the buffer >> + by passing buffer offset & length. >> Zero copy >> ---------- >> +========= >> + >> +What is zero copy? >> +------------------ >> + >> +When application submits IO to ``/dev/ublkb*``, userspace >> buffer(direct io) >> +or page cache buffer(buffered io) or kernel buffer(meta io often) is >> used >> +for submitting data to ublk driver, and all kinds of these buffers are >> +represented by bio/bvecs(ublk request buffer) finally. Before supporting >> +zero copy, data in these buffers has to be copied to ublk server >> userspace >> +buffer before handling WRITE IO, or after handing READ IO, so that ublk >> +server can handle IO for ``/dev/ublkb*`` with the copied data. >> + >> +The extra copy between ublk request buffer and ublk server userspace >> buffer >> +not only increases CPU utilization(such as pinning pages, copy data), >> but >> +also consumes memory bandwidth, and the cost could be very big when >> IO size >> +is big. It is observed that ublk-null IOPS may be increased to ~5X if >> the >> +extra copy can be avoided. >> + >> +So zero copy is very important for supporting high performance block >> device >> +in userspace. >> + >> +Technical requirements >> +---------------------- >> + >> +- ublk request buffer use >> + >> +ublk request buffer is represented by bio/bvec, which is immutable, >> so do >> +not try to change bvec via buffer reference; data can be read from or >> +written to the buffer according to buffer direction, but bvec can't be >> +changed >> + >> +- buffer lifetime >> + >> +Ublk server borrows ublk request buffer for handling ublk IO, ublk >> request >> +buffer reference is used. Reference can't outlive the referent >> buffer. That >> +means all request buffer references have to be released by ublk server >> +before ublk driver completes this request, when request buffer ownership >> +is transferred to upper layer(FS, application, ...). >> + >> +Also after ublk request is completed, any page belonging to this ublk >> +request can not be written or read any more from ublk server since it is >> +one block device from kernel viewpoint. >> + >> +- buffer direction >> + >> +For ublk WRITE request, ublk request buffer should only be accessed >> as data >> +source, and the buffer can't be written by ublk server >> + >> +For ublk READ request, ublk request buffer should only be accessed as >> data >> +destination, and the buffer can't be read by ublk server, otherwise >> kernel >> +data is leaked to ublk server, which can be unprivileged application. >> + >> +- arbitrary size sub-buffer needs to be retrieved from ublk server >> + >> +ublk is one generic framework for implementing block device in >> userspace, >> +and typical requirements include logical volume manager(mirror, >> stripped, ...), >> +distributed network storage, compressed target, ... >> + >> +ublk server needs to retrieve arbitrary size sub-buffer of ublk >> request, and >> +ublk server needs to submit IOs with these sub-buffer(s). That also >> means >> +arbitrary size sub-buffer(s) can be used to submit IO multiple times. >> + >> +Any sub-buffer is actually one reference of ublk request buffer, which >> +ownership can't be transferred to upper layer if any reference is held >> +by ublk server. >> + >> +Why slice isn't good for ublk zero copy >> +--------------------------------------- >> + >> +- spliced page from ->splice_read() can't be written >> + >> +ublk READ request can't be handled because spliced page can't be >> written to, and >> +extending splice for ublk zero copy isn't one good solution >> [#splice_extend]_ >> + >> +- it is very hard to meet above requirements wrt. request buffer >> lifetime >> + >> +splice/pipe focuses on page reference lifetime, but ublk zero copy >> pays more >> +attention to ublk request buffer lifetime. If is very inefficient to >> respect >> +request buffer lifetime by using all pipe buffer's ->release() which >> requires >> +all pipe buffers and pipe to be kept when ublk server handles IO. >> That means >> +one single dedicated ``pipe_inode_info`` has to be allocated runtime >> for each >> +provided buffer, and the pipe needs to be populated with pages in >> ublk request >> +buffer. >> + >> + >> +io_uring fused command based zero copy >> +-------------------------------------- >> + >> +io_uring fused command includes one primary command(uring command) >> and one >> +generic secondary request. The primary command is responsible for >> submitting >> +secondary request with provided buffer from ublk request, and primary >> command >> +won't be completed until the secondary request is completed. >> + >> +Typical ublk IO handling includes network and FS IO, so it is usual >> enough >> +for io_uring net & fs to support IO with provided buffer from primary >> command. >> -Zero copy is a generic requirement for nbd, fuse or similar drivers. A >> -problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to >> userspace >> -can't be remapped any more in kernel with existing mm interfaces. >> This can >> -occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported >> that >> -big requests (IO size >= 256 KB) may benefit a lot from zero copy. >> +Once primary command is submitted successfully, ublk driver >> guarantees that >> +the ublk request buffer won't be gone away since secondary request >> actually >> +grabs the buffer's reference. This way also guarantees that multiple >> +concurrent fused commands associated with same request buffer works >> fine, >> +as the provided buffer reference is shared & read-only. >> +Also buffer usage direction flag is passed to primary command from >> userspace, >> +so ublk driver can validate if it is legal to use buffer with requested >> +direction. >> References >> ========== >> @@ -323,4 +431,4 @@ References >> .. [#stefan] >> https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ >> -.. [#xiaoguang] >> https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ >> +.. [#splice_extend] >> https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/ >> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c >> index a744d3b5da91..64b0408873f6 100644 >> --- a/drivers/block/ublk_drv.c >> +++ b/drivers/block/ublk_drv.c >> @@ -74,10 +74,15 @@ struct ublk_rq_data { >> * successfully >> */ >> struct kref ref; >> + bool allocated_bvec; >> + struct io_uring_bvec_buf buf[0]; >> }; >> struct ublk_uring_cmd_pdu { >> - struct ublk_queue *ubq; >> + union { >> + struct ublk_queue *ubq; >> + struct request *req; >> + }; >> }; >> /* >> @@ -565,6 +570,69 @@ static size_t ublk_copy_user_pages(const struct >> request *req, >> return done; >> } >> +/* >> + * The built command buffer is immutable, so it is fine to feed it to >> + * concurrent io_uring fused commands >> + */ >> +static int ublk_init_zero_copy_buffer(struct request *rq) >> +{ >> + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); >> + struct io_uring_bvec_buf *imu = data->buf; >> + struct req_iterator rq_iter; >> + unsigned int nr_bvecs = 0; >> + struct bio_vec *bvec; >> + unsigned int offset; >> + struct bio_vec bv; >> + >> + if (!ublk_rq_has_data(rq)) >> + goto exit; >> + >> + rq_for_each_bvec(bv, rq, rq_iter) >> + nr_bvecs++; >> + >> + if (!nr_bvecs) >> + goto exit; >> + >> + if (rq->bio != rq->biotail) { >> + int idx = 0; >> + >> + bvec = kvmalloc_array(nr_bvecs, sizeof(struct bio_vec), >> + GFP_NOIO); >> + if (!bvec) >> + return -ENOMEM; >> + >> + offset = 0; >> + rq_for_each_bvec(bv, rq, rq_iter) >> + bvec[idx++] = bv; >> + data->allocated_bvec = true; >> + } else { >> + struct bio *bio = rq->bio; >> + >> + offset = bio->bi_iter.bi_bvec_done; >> + bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter); >> + } >> + imu->bvec = bvec; >> + imu->nr_bvecs = nr_bvecs; >> + imu->offset = offset; >> + imu->len = blk_rq_bytes(rq); >> + >> + return 0; >> +exit: >> + imu->bvec = NULL; >> + return 0; >> +} >> + >> +static void ublk_deinit_zero_copy_buffer(struct request *rq) >> +{ >> + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); >> + struct io_uring_bvec_buf *imu = data->buf; >> + >> + if (data->allocated_bvec) { >> + kvfree(imu->bvec); >> + data->allocated_bvec = false; >> + } >> +} >> + >> static inline bool ublk_need_map_req(const struct request *req) >> { >> return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE; >> @@ -575,11 +643,23 @@ static inline bool ublk_need_unmap_req(const >> struct request *req) >> return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ; >> } >> -static int ublk_map_io(const struct ublk_queue *ubq, const struct >> request *req, >> +static int ublk_map_io(const struct ublk_queue *ubq, struct request >> *req, >> struct ublk_io *io) >> { >> const unsigned int rq_bytes = blk_rq_bytes(req); >> + if (ublk_support_zc(ubq)) { >> + int ret = ublk_init_zero_copy_buffer(req); >> + >> + /* >> + * The only failure is -ENOMEM for allocating fused cmd >> + * buffer, return zero so that we can requeue this req. >> + */ >> + if (unlikely(ret)) >> + return 0; >> + return rq_bytes; >> + } >> + >> /* >> * no zero copy, we delay copy WRITE request data into ublksrv >> * context and the big benefit is that pinning pages in current >> @@ -599,11 +679,17 @@ static int ublk_map_io(const struct ublk_queue >> *ubq, const struct request *req, >> } >> static int ublk_unmap_io(const struct ublk_queue *ubq, >> - const struct request *req, >> + struct request *req, >> struct ublk_io *io) >> { >> const unsigned int rq_bytes = blk_rq_bytes(req); >> + if (ublk_support_zc(ubq)) { >> + ublk_deinit_zero_copy_buffer(req); >> + >> + return rq_bytes; >> + } >> + >> if (ublk_need_unmap_req(req)) { >> struct iov_iter iter; >> struct iovec iov; >> @@ -687,6 +773,12 @@ static inline struct ublk_uring_cmd_pdu >> *ublk_get_uring_cmd_pdu( >> return (struct ublk_uring_cmd_pdu *)&ioucmd->pdu; >> } >> +static inline struct ublk_uring_cmd_pdu *ublk_get_uring_fused_cmd_pdu( >> + struct io_uring_cmd *ioucmd) >> +{ >> + return (struct ublk_uring_cmd_pdu *)&ioucmd->fused.pdu; >> +} >> + >> static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq) >> { >> return ubq->ubq_daemon->flags & PF_EXITING; >> @@ -742,6 +834,7 @@ static inline void __ublk_complete_rq(struct >> request *req) >> return; >> exit: >> + ublk_deinit_zero_copy_buffer(req); >> blk_mq_end_request(req, res); >> } >> @@ -1352,6 +1445,68 @@ static inline struct request >> *__ublk_check_and_get_req(struct ublk_device *ub, >> return NULL; >> } >> +static void ublk_fused_cmd_done_cb(struct io_uring_cmd *cmd, >> + unsigned issue_flags) >> +{ >> + struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd); >> + struct request *req = pdu->req; >> + struct ublk_queue *ubq = req->mq_hctx->driver_data; >> + >> + ublk_put_req_ref(ubq, req); >> + io_uring_cmd_done(cmd, 0, 0, issue_flags); >> +} >> + >> +static inline bool ublk_check_fused_buf_dir(const struct request *req, >> + unsigned int flags) >> +{ >> + flags &= IO_URING_F_FUSED_BUF; > > ~IO_URING_F_FUSED_BUF ? > Ah sorry for the noise, got confused because the caller ublk_handle_fused_cmd checks for the flag with '&' and then ublk_check_fused_buf_dir checks with '=' - I thought intend was to remove the flag.
diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst index 1713b2890abb..7b7aa24e9729 100644 --- a/Documentation/block/ublk.rst +++ b/Documentation/block/ublk.rst @@ -297,18 +297,126 @@ with specified IO tag in the command data: ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy the server buffer (pages) read to the IO request pages. -Future development -================== +- ``UBLK_IO_FUSED_SUBMIT_IO`` + + Used for implementing zero copy feature. + + It has to been the primary command of io_uring fused command. This command + submits the generic secondary IO request with io buffer provided by our primary + command, and won't be completed until the secondary request is done. + + The provided buffer is represented as ``io_uring_bvec_buf``, which is + actually ublk request buffer's reference, and the reference is shared & + read-only, so the generic secondary request can retrieve any part of the buffer + by passing buffer offset & length. Zero copy ---------- +========= + +What is zero copy? +------------------ + +When application submits IO to ``/dev/ublkb*``, userspace buffer(direct io) +or page cache buffer(buffered io) or kernel buffer(meta io often) is used +for submitting data to ublk driver, and all kinds of these buffers are +represented by bio/bvecs(ublk request buffer) finally. Before supporting +zero copy, data in these buffers has to be copied to ublk server userspace +buffer before handling WRITE IO, or after handing READ IO, so that ublk +server can handle IO for ``/dev/ublkb*`` with the copied data. + +The extra copy between ublk request buffer and ublk server userspace buffer +not only increases CPU utilization(such as pinning pages, copy data), but +also consumes memory bandwidth, and the cost could be very big when IO size +is big. It is observed that ublk-null IOPS may be increased to ~5X if the +extra copy can be avoided. + +So zero copy is very important for supporting high performance block device +in userspace. + +Technical requirements +---------------------- + +- ublk request buffer use + +ublk request buffer is represented by bio/bvec, which is immutable, so do +not try to change bvec via buffer reference; data can be read from or +written to the buffer according to buffer direction, but bvec can't be +changed + +- buffer lifetime + +Ublk server borrows ublk request buffer for handling ublk IO, ublk request +buffer reference is used. Reference can't outlive the referent buffer. That +means all request buffer references have to be released by ublk server +before ublk driver completes this request, when request buffer ownership +is transferred to upper layer(FS, application, ...). + +Also after ublk request is completed, any page belonging to this ublk +request can not be written or read any more from ublk server since it is +one block device from kernel viewpoint. + +- buffer direction + +For ublk WRITE request, ublk request buffer should only be accessed as data +source, and the buffer can't be written by ublk server + +For ublk READ request, ublk request buffer should only be accessed as data +destination, and the buffer can't be read by ublk server, otherwise kernel +data is leaked to ublk server, which can be unprivileged application. + +- arbitrary size sub-buffer needs to be retrieved from ublk server + +ublk is one generic framework for implementing block device in userspace, +and typical requirements include logical volume manager(mirror, stripped, ...), +distributed network storage, compressed target, ... + +ublk server needs to retrieve arbitrary size sub-buffer of ublk request, and +ublk server needs to submit IOs with these sub-buffer(s). That also means +arbitrary size sub-buffer(s) can be used to submit IO multiple times. + +Any sub-buffer is actually one reference of ublk request buffer, which +ownership can't be transferred to upper layer if any reference is held +by ublk server. + +Why slice isn't good for ublk zero copy +--------------------------------------- + +- spliced page from ->splice_read() can't be written + +ublk READ request can't be handled because spliced page can't be written to, and +extending splice for ublk zero copy isn't one good solution [#splice_extend]_ + +- it is very hard to meet above requirements wrt. request buffer lifetime + +splice/pipe focuses on page reference lifetime, but ublk zero copy pays more +attention to ublk request buffer lifetime. If is very inefficient to respect +request buffer lifetime by using all pipe buffer's ->release() which requires +all pipe buffers and pipe to be kept when ublk server handles IO. That means +one single dedicated ``pipe_inode_info`` has to be allocated runtime for each +provided buffer, and the pipe needs to be populated with pages in ublk request +buffer. + + +io_uring fused command based zero copy +-------------------------------------- + +io_uring fused command includes one primary command(uring command) and one +generic secondary request. The primary command is responsible for submitting +secondary request with provided buffer from ublk request, and primary command +won't be completed until the secondary request is completed. + +Typical ublk IO handling includes network and FS IO, so it is usual enough +for io_uring net & fs to support IO with provided buffer from primary command. -Zero copy is a generic requirement for nbd, fuse or similar drivers. A -problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace -can't be remapped any more in kernel with existing mm interfaces. This can -occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that -big requests (IO size >= 256 KB) may benefit a lot from zero copy. +Once primary command is submitted successfully, ublk driver guarantees that +the ublk request buffer won't be gone away since secondary request actually +grabs the buffer's reference. This way also guarantees that multiple +concurrent fused commands associated with same request buffer works fine, +as the provided buffer reference is shared & read-only. +Also buffer usage direction flag is passed to primary command from userspace, +so ublk driver can validate if it is legal to use buffer with requested +direction. References ========== @@ -323,4 +431,4 @@ References .. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ -.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ +.. [#splice_extend] https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/ diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index a744d3b5da91..64b0408873f6 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -74,10 +74,15 @@ struct ublk_rq_data { * successfully */ struct kref ref; + bool allocated_bvec; + struct io_uring_bvec_buf buf[0]; }; struct ublk_uring_cmd_pdu { - struct ublk_queue *ubq; + union { + struct ublk_queue *ubq; + struct request *req; + }; }; /* @@ -565,6 +570,69 @@ static size_t ublk_copy_user_pages(const struct request *req, return done; } +/* + * The built command buffer is immutable, so it is fine to feed it to + * concurrent io_uring fused commands + */ +static int ublk_init_zero_copy_buffer(struct request *rq) +{ + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); + struct io_uring_bvec_buf *imu = data->buf; + struct req_iterator rq_iter; + unsigned int nr_bvecs = 0; + struct bio_vec *bvec; + unsigned int offset; + struct bio_vec bv; + + if (!ublk_rq_has_data(rq)) + goto exit; + + rq_for_each_bvec(bv, rq, rq_iter) + nr_bvecs++; + + if (!nr_bvecs) + goto exit; + + if (rq->bio != rq->biotail) { + int idx = 0; + + bvec = kvmalloc_array(nr_bvecs, sizeof(struct bio_vec), + GFP_NOIO); + if (!bvec) + return -ENOMEM; + + offset = 0; + rq_for_each_bvec(bv, rq, rq_iter) + bvec[idx++] = bv; + data->allocated_bvec = true; + } else { + struct bio *bio = rq->bio; + + offset = bio->bi_iter.bi_bvec_done; + bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter); + } + imu->bvec = bvec; + imu->nr_bvecs = nr_bvecs; + imu->offset = offset; + imu->len = blk_rq_bytes(rq); + + return 0; +exit: + imu->bvec = NULL; + return 0; +} + +static void ublk_deinit_zero_copy_buffer(struct request *rq) +{ + struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq); + struct io_uring_bvec_buf *imu = data->buf; + + if (data->allocated_bvec) { + kvfree(imu->bvec); + data->allocated_bvec = false; + } +} + static inline bool ublk_need_map_req(const struct request *req) { return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE; @@ -575,11 +643,23 @@ static inline bool ublk_need_unmap_req(const struct request *req) return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ; } -static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req, +static int ublk_map_io(const struct ublk_queue *ubq, struct request *req, struct ublk_io *io) { const unsigned int rq_bytes = blk_rq_bytes(req); + if (ublk_support_zc(ubq)) { + int ret = ublk_init_zero_copy_buffer(req); + + /* + * The only failure is -ENOMEM for allocating fused cmd + * buffer, return zero so that we can requeue this req. + */ + if (unlikely(ret)) + return 0; + return rq_bytes; + } + /* * no zero copy, we delay copy WRITE request data into ublksrv * context and the big benefit is that pinning pages in current @@ -599,11 +679,17 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req, } static int ublk_unmap_io(const struct ublk_queue *ubq, - const struct request *req, + struct request *req, struct ublk_io *io) { const unsigned int rq_bytes = blk_rq_bytes(req); + if (ublk_support_zc(ubq)) { + ublk_deinit_zero_copy_buffer(req); + + return rq_bytes; + } + if (ublk_need_unmap_req(req)) { struct iov_iter iter; struct iovec iov; @@ -687,6 +773,12 @@ static inline struct ublk_uring_cmd_pdu *ublk_get_uring_cmd_pdu( return (struct ublk_uring_cmd_pdu *)&ioucmd->pdu; } +static inline struct ublk_uring_cmd_pdu *ublk_get_uring_fused_cmd_pdu( + struct io_uring_cmd *ioucmd) +{ + return (struct ublk_uring_cmd_pdu *)&ioucmd->fused.pdu; +} + static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq) { return ubq->ubq_daemon->flags & PF_EXITING; @@ -742,6 +834,7 @@ static inline void __ublk_complete_rq(struct request *req) return; exit: + ublk_deinit_zero_copy_buffer(req); blk_mq_end_request(req, res); } @@ -1352,6 +1445,68 @@ static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub, return NULL; } +static void ublk_fused_cmd_done_cb(struct io_uring_cmd *cmd, + unsigned issue_flags) +{ + struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd); + struct request *req = pdu->req; + struct ublk_queue *ubq = req->mq_hctx->driver_data; + + ublk_put_req_ref(ubq, req); + io_uring_cmd_done(cmd, 0, 0, issue_flags); +} + +static inline bool ublk_check_fused_buf_dir(const struct request *req, + unsigned int flags) +{ + flags &= IO_URING_F_FUSED_BUF; + + if (req_op(req) == REQ_OP_READ && flags == IO_URING_F_FUSED_BUF_DEST) + return true; + + if (req_op(req) == REQ_OP_WRITE && flags == IO_URING_F_FUSED_BUF_SRC) + return true; + + return false; +} + +static int ublk_handle_fused_cmd(struct io_uring_cmd *cmd, + struct ublk_queue *ubq, int tag, unsigned int issue_flags) +{ + struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd); + struct ublk_device *ub = cmd->file->private_data; + struct ublk_rq_data *data; + struct request *req; + + if (!ub) + return -EPERM; + + if (!(issue_flags & IO_URING_F_FUSED_BUF)) + goto exit; + + req = __ublk_check_and_get_req(ub, ubq, tag, 0); + if (!req) + goto exit; + + pr_devel("%s: qid %d tag %u request bytes %u, issue flags %x\n", + __func__, tag, ubq->q_id, blk_rq_bytes(req), + issue_flags); + + if (!ublk_check_fused_buf_dir(req, issue_flags)) + goto exit_put_ref; + + pdu->req = req; + data = blk_mq_rq_to_pdu(req); + io_fused_provide_buf_and_start(cmd, issue_flags, data->buf, + ublk_fused_cmd_done_cb); + return -EIOCBQUEUED; + +exit_put_ref: + ublk_put_req_ref(ubq, req); +exit: + return -EINVAL; +} + static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags) { struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd; @@ -1367,6 +1522,10 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags) __func__, cmd->cmd_op, ub_cmd->q_id, tag, ub_cmd->result); + if ((issue_flags & IO_URING_F_FUSED_BUF) && + cmd_op != UBLK_IO_FUSED_SUBMIT_IO) + return -EOPNOTSUPP; + if (ub_cmd->q_id >= ub->dev_info.nr_hw_queues) goto out; @@ -1374,7 +1533,12 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags) if (!ubq || ub_cmd->q_id != ubq->q_id) goto out; - if (ubq->ubq_daemon && ubq->ubq_daemon != current) + /* + * The fused command reads the io buffer data structure only, so it + * is fine to be issued from other context. + */ + if ((ubq->ubq_daemon && ubq->ubq_daemon != current) && + (cmd_op != UBLK_IO_FUSED_SUBMIT_IO)) goto out; if (tag >= ubq->q_depth) @@ -1397,6 +1561,9 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags) goto out; switch (cmd_op) { + case UBLK_IO_FUSED_SUBMIT_IO: + return ublk_handle_fused_cmd(cmd, ubq, tag, issue_flags); + case UBLK_IO_FETCH_REQ: /* UBLK_IO_FETCH_REQ is only allowed before queue is setup */ if (ublk_queue_ready(ubq)) { @@ -1726,11 +1893,14 @@ static void ublk_align_max_io_size(struct ublk_device *ub) static int ublk_add_tag_set(struct ublk_device *ub) { + int zc = !!(ub->dev_info.flags & UBLK_F_SUPPORT_ZERO_COPY); + struct ublk_rq_data *data; + ub->tag_set.ops = &ublk_mq_ops; ub->tag_set.nr_hw_queues = ub->dev_info.nr_hw_queues; ub->tag_set.queue_depth = ub->dev_info.queue_depth; ub->tag_set.numa_node = NUMA_NO_NODE; - ub->tag_set.cmd_size = sizeof(struct ublk_rq_data); + ub->tag_set.cmd_size = struct_size(data, buf, zc); ub->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; ub->tag_set.driver_data = ub; return blk_mq_alloc_tag_set(&ub->tag_set); @@ -1946,12 +2116,18 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd) */ ub->dev_info.flags &= UBLK_F_ALL; + /* + * NEED_GET_DATA doesn't make sense any more in case that + * ZERO_COPY is requested. Another reason is that userspace + * can read/write io request buffer by pread()/pwrite() with + * each io buffer's position. + */ + if (ub->dev_info.flags & UBLK_F_SUPPORT_ZERO_COPY) + ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA; + if (!IS_BUILTIN(CONFIG_BLK_DEV_UBLK)) ub->dev_info.flags |= UBLK_F_URING_CMD_COMP_IN_TASK; - /* We are not ready to support zero copy */ - ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY; - ub->dev_info.nr_hw_queues = min_t(unsigned int, ub->dev_info.nr_hw_queues, nr_cpu_ids); ublk_align_max_io_size(ub); diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h index d1a6b3dc0327..c4f3465399cf 100644 --- a/include/uapi/linux/ublk_cmd.h +++ b/include/uapi/linux/ublk_cmd.h @@ -44,6 +44,7 @@ #define UBLK_IO_FETCH_REQ 0x20 #define UBLK_IO_COMMIT_AND_FETCH_REQ 0x21 #define UBLK_IO_NEED_GET_DATA 0x22 +#define UBLK_IO_FUSED_SUBMIT_IO 0x23 /* only ABORT means that no re-fetch */ #define UBLK_IO_RES_OK 0 @@ -85,10 +86,7 @@ static inline __u64 ublk_pos(__u16 q_id, __u16 tag, __u32 offset) ((((__u64)tag) << UBLK_BUF_SIZE_BITS) + offset); } -/* - * zero copy requires 4k block size, and can remap ublk driver's io - * request into ublksrv's vm space - */ +/* io_uring fused command based zero copy */ #define UBLK_F_SUPPORT_ZERO_COPY (1ULL << 0) /*
Apply io_uring fused command for supporting zero copy: 1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and deinit it in ublk_unmap_io(), and this buffer is immutable, so it is just fine to retrieve it from concurrent fused command. 1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this fused cmd(zero copy) buffer 2) call io_fused_cmd_start_secondary_req() to provide buffer to secondary request and submit secondary request; meantime setup complete callback via this API, once secondary request is completed, the complete callback is called for freeing the buffer and completing the fused command Also request reference is held during fused command lifetime, and this way guarantees that request buffer won't be freed until all inflight fused commands are completed. userspace(only implement sqe128 fused command): https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-for-v6 liburing test(only implement normal sqe fused command: two 64byte SQEs) https://github.com/ming1/liburing/tree/fused_cmd_miniublk_for_v6 Signed-off-by: Ming Lei <ming.lei@redhat.com> --- Documentation/block/ublk.rst | 126 ++++++++++++++++++++-- drivers/block/ublk_drv.c | 192 ++++++++++++++++++++++++++++++++-- include/uapi/linux/ublk_cmd.h | 6 +- 3 files changed, 303 insertions(+), 21 deletions(-)