diff mbox series

[RFC,10/20] dt-bindings: mtd: oxnas-nand: remove obsolete bindings

Message ID 20230331-topic-oxnas-upstream-remove-v1-10-5bd58fd1dd1f@linaro.org (mailing list archive)
State RFC
Headers show
Series ARM: oxnas support removal | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Neil Armstrong March 31, 2023, 8:34 a.m. UTC 
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
for OX810 and OX820 nand bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../devicetree/bindings/mtd/oxnas-nand.txt         | 41 ----------------------
 1 file changed, 41 deletions(-)

Comments

Krzysztof Kozlowski April 2, 2023, 10:18 a.m. UTC | #1 
On 31/03/2023 10:34, Neil Armstrong wrote:
> Due to lack of maintainance and stall of development for a few years now,
> and since no new features will ever be added upstream, remove the
> for OX810 and OX820 nand bindings.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
deleted file mode 100644
index 2ba07fc8b79c..000000000000
--- a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
+++ /dev/null
@@ -1,41 +0,0 @@ 
-* Oxford Semiconductor OXNAS NAND Controller
-
-Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings.
-
-Required properties:
- - compatible: "oxsemi,ox820-nand"
- - reg: Base address and length for NAND mapped memory.
-
-Optional Properties:
- - clocks: phandle to the NAND gate clock if needed.
- - resets: phandle to the NAND reset control if needed.
-
-Example:
-
-nandc: nand-controller@41000000 {
-	compatible = "oxsemi,ox820-nand";
-	reg = <0x41000000 0x100000>;
-	clocks = <&stdclk CLK_820_NAND>;
-	resets = <&reset RESET_NAND>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};