@@ -611,6 +611,7 @@ enum wx_isb_idx {
struct wx {
u8 __iomem *hw_addr;
+ void *priv;
struct pci_dev *pdev;
struct net_device *netdev;
struct wx_bus_info bus;
@@ -8,4 +8,5 @@ obj-$(CONFIG_TXGBE) += txgbe.o
txgbe-objs := txgbe_main.o \
txgbe_hw.o \
+ txgbe_phy.o \
txgbe_ethtool.o
@@ -15,6 +15,7 @@
#include "../libwx/wx_hw.h"
#include "txgbe_type.h"
#include "txgbe_hw.h"
+#include "txgbe_phy.h"
#include "txgbe_ethtool.h"
char txgbe_driver_name[] = "txgbe";
@@ -512,6 +513,7 @@ static int txgbe_probe(struct pci_dev *pdev,
struct net_device *netdev;
int err, expected_gts;
struct wx *wx = NULL;
+ struct txgbe *txgbe;
u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0;
u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0;
@@ -662,10 +664,21 @@ static int txgbe_probe(struct pci_dev *pdev,
"0x%08x", etrack_id);
}
- err = register_netdev(netdev);
+ txgbe = devm_kzalloc(&pdev->dev, sizeof(*txgbe), GFP_KERNEL);
+ if (!txgbe)
+ return -ENOMEM;
+
+ txgbe->wx = wx;
+ wx->priv = txgbe;
+
+ err = txgbe_init_phy(txgbe);
if (err)
goto err_release_hw;
+ err = register_netdev(netdev);
+ if (err)
+ goto err_remove_phy;
+
pci_set_drvdata(pdev, wx);
netif_tx_stop_all_queues(netdev);
@@ -693,6 +706,8 @@ static int txgbe_probe(struct pci_dev *pdev,
return 0;
+err_remove_phy:
+ txgbe_remove_phy(txgbe);
err_release_hw:
wx_clear_interrupt_scheme(wx);
wx_control_hw(wx, false);
@@ -723,6 +738,8 @@ static void txgbe_remove(struct pci_dev *pdev)
netdev = wx->netdev;
unregister_netdev(netdev);
+ txgbe_remove_phy((struct txgbe *)wx->priv);
+
pci_release_selected_regions(pdev,
pci_select_bars(pdev, IORESOURCE_MEM));
new file mode 100644
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/gpio/property.h>
+#include <linux/pci.h>
+
+#include "../libwx/wx_type.h"
+#include "txgbe_type.h"
+#include "txgbe_phy.h"
+
+static int txgbe_swnodes_register(struct txgbe *txgbe)
+{
+ struct txgbe_nodes *nodes = &txgbe->nodes;
+ struct pci_dev *pdev = txgbe->wx->pdev;
+ struct software_node *swnodes;
+ u32 id;
+
+ id = (pdev->bus->number << 8) | pdev->devfn;
+
+ snprintf(nodes->gpio_name, sizeof(nodes->gpio_name), "txgbe_gpio-%x", id);
+ snprintf(nodes->i2c_name, sizeof(nodes->i2c_name), "txgbe_i2c-%x", id);
+ snprintf(nodes->sfp_name, sizeof(nodes->sfp_name), "txgbe_sfp-%x", id);
+ snprintf(nodes->phylink_name, sizeof(nodes->phylink_name), "txgbe_phylink-%x", id);
+
+ swnodes = nodes->swnodes;
+
+ nodes->gpio_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names", "default");
+ swnodes[SWNODE_GPIO] = NODE_PROP(nodes->gpio_name, nodes->gpio_props);
+ nodes->gpio0_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 0, GPIO_ACTIVE_HIGH);
+ nodes->gpio1_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 1, GPIO_ACTIVE_HIGH);
+ nodes->gpio2_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 2, GPIO_ACTIVE_LOW);
+ nodes->gpio3_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 3, GPIO_ACTIVE_HIGH);
+ nodes->gpio4_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 4, GPIO_ACTIVE_HIGH);
+ nodes->gpio5_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO], 5, GPIO_ACTIVE_HIGH);
+
+ nodes->i2c_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names", "default");
+ swnodes[SWNODE_I2C] = NODE_PROP(nodes->i2c_name, nodes->i2c_props);
+ nodes->i2c_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_I2C]);
+
+ nodes->sfp_props[0] = PROPERTY_ENTRY_STRING("compatible", "sff,sfp");
+ nodes->sfp_props[1] = PROPERTY_ENTRY_REF_ARRAY("i2c-bus", nodes->i2c_ref);
+ nodes->sfp_props[2] = PROPERTY_ENTRY_REF_ARRAY("tx-fault-gpios", nodes->gpio0_ref);
+ nodes->sfp_props[3] = PROPERTY_ENTRY_REF_ARRAY("tx-disable-gpios", nodes->gpio1_ref);
+ nodes->sfp_props[4] = PROPERTY_ENTRY_REF_ARRAY("mod-def0-gpios", nodes->gpio2_ref);
+ nodes->sfp_props[5] = PROPERTY_ENTRY_REF_ARRAY("los-gpios", nodes->gpio3_ref);
+ nodes->sfp_props[6] = PROPERTY_ENTRY_REF_ARRAY("rate-select1-gpios", nodes->gpio4_ref);
+ nodes->sfp_props[7] = PROPERTY_ENTRY_REF_ARRAY("rate-select0-gpios", nodes->gpio5_ref);
+ swnodes[SWNODE_SFP] = NODE_PROP(nodes->sfp_name, nodes->sfp_props);
+ nodes->sfp_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_SFP]);
+
+ nodes->phylink_props[0] = PROPERTY_ENTRY_STRING("managed", "in-band-status");
+ nodes->phylink_props[1] = PROPERTY_ENTRY_REF_ARRAY("sfp", nodes->sfp_ref);
+ swnodes[SWNODE_PHYLINK] = NODE_PROP(nodes->phylink_name, nodes->phylink_props);
+
+ nodes->group[SWNODE_GPIO] = &swnodes[SWNODE_GPIO];
+ nodes->group[SWNODE_I2C] = &swnodes[SWNODE_I2C];
+ nodes->group[SWNODE_SFP] = &swnodes[SWNODE_SFP];
+ nodes->group[SWNODE_PHYLINK] = &swnodes[SWNODE_PHYLINK];
+
+ return software_node_register_node_group(nodes->group);
+}
+
+int txgbe_init_phy(struct txgbe *txgbe)
+{
+ int ret;
+
+ ret = txgbe_swnodes_register(txgbe);
+ if (ret) {
+ wx_err(txgbe->wx, "failed to register software nodes\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+void txgbe_remove_phy(struct txgbe *txgbe)
+{
+ software_node_unregister_node_group(txgbe->nodes.group);
+}
new file mode 100644
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _TXGBE_PHY_H_
+#define _TXGBE_PHY_H_
+
+int txgbe_init_phy(struct txgbe *txgbe);
+void txgbe_remove_phy(struct txgbe *txgbe);
+
+#endif /* _TXGBE_NODE_H_ */
@@ -4,6 +4,8 @@
#ifndef _TXGBE_TYPE_H_
#define _TXGBE_TYPE_H_
+#include <linux/property.h>
+
/* Device IDs */
#define TXGBE_DEV_ID_SP1000 0x1001
#define TXGBE_DEV_ID_WX1820 0x2001
@@ -99,4 +101,44 @@
extern char txgbe_driver_name[];
+#define NODE_PROP(_NAME, _PROP) \
+ (const struct software_node) { \
+ .name = _NAME, \
+ .properties = _PROP, \
+ }
+
+enum txgbe_swnodes {
+ SWNODE_GPIO = 0,
+ SWNODE_I2C,
+ SWNODE_SFP,
+ SWNODE_PHYLINK,
+ SWNODE_MAX
+};
+
+struct txgbe_nodes {
+ char gpio_name[32];
+ char i2c_name[32];
+ char sfp_name[32];
+ char phylink_name[32];
+ struct property_entry gpio_props[1];
+ struct property_entry i2c_props[1];
+ struct property_entry sfp_props[8];
+ struct property_entry phylink_props[2];
+ struct software_node_ref_args i2c_ref[1];
+ struct software_node_ref_args gpio0_ref[1];
+ struct software_node_ref_args gpio1_ref[1];
+ struct software_node_ref_args gpio2_ref[1];
+ struct software_node_ref_args gpio3_ref[1];
+ struct software_node_ref_args gpio4_ref[1];
+ struct software_node_ref_args gpio5_ref[1];
+ struct software_node_ref_args sfp_ref[1];
+ struct software_node swnodes[SWNODE_MAX];
+ const struct software_node *group[SWNODE_MAX + 1];
+};
+
+struct txgbe {
+ struct wx *wx;
+ struct txgbe_nodes nodes;
+};
+
#endif /* _TXGBE_TYPE_H_ */
Register software nodes for GPIO, I2C, SFP and PHYLINK. Define the device properties. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> --- drivers/net/ethernet/wangxun/libwx/wx_type.h | 1 + drivers/net/ethernet/wangxun/txgbe/Makefile | 1 + .../net/ethernet/wangxun/txgbe/txgbe_main.c | 19 ++++- .../net/ethernet/wangxun/txgbe/txgbe_phy.c | 79 +++++++++++++++++++ .../net/ethernet/wangxun/txgbe/txgbe_phy.h | 10 +++ .../net/ethernet/wangxun/txgbe/txgbe_type.h | 42 ++++++++++ 6 files changed, 151 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h