diff mbox series

[v7,03/22] clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE

Message ID 20230401111934.130844-4-hal.feng@starfivetech.com (mailing list archive)
State Accepted
Headers show
Series Basic clock, reset & device tree support for StarFive JH7110 RISC-V SoC | expand

Checks

Context Check Description
conchuod/cover_letter success Series has a cover letter
conchuod/tree_selection success Guessed tree name to be for-next at HEAD d34a6b715a23
conchuod/fixes_present success Fixes tag not required for -next series
conchuod/maintainers_pattern success MAINTAINERS pattern errors before the patch: 2 and now 2
conchuod/verify_signedoff success Signed-off-by tag matches author and committer
conchuod/kdoc success Errors and warnings before: 0 this patch: 0
conchuod/build_rv64_clang_allmodconfig success Errors and warnings before: 18 this patch: 18
conchuod/module_param success Was 0 now: 0
conchuod/build_rv64_gcc_allmodconfig success Errors and warnings before: 18 this patch: 18
conchuod/build_rv32_defconfig success Build OK
conchuod/dtb_warn_rv64 success Errors and warnings before: 3 this patch: 3
conchuod/header_inline success No static functions without inline keyword in header files
conchuod/checkpatch success total: 0 errors, 0 warnings, 0 checks, 26 lines checked
conchuod/source_inline success Was 0 now: 0
conchuod/build_rv64_nommu_k210_defconfig success Build OK
conchuod/verify_fixes success No Fixes tag
conchuod/build_rv64_nommu_virt_defconfig success Build OK

Commit Message

Hal Feng April 1, 2023, 11:19 a.m. UTC
Using ARCH_FOO symbol is preferred than SOC_FOO.
Set obj-y for starfive/ in Makefile, so the StarFive drivers
can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 drivers/clk/Makefile         | 2 +-
 drivers/clk/starfive/Kconfig | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Heiko Stübner April 5, 2023, 11:48 a.m. UTC | #1
Am Samstag, 1. April 2023, 13:19:15 CEST schrieb Hal Feng:
> Using ARCH_FOO symbol is preferred than SOC_FOO.
> Set obj-y for starfive/ in Makefile, so the StarFive drivers
> can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n.
> 
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>

> ---
>  drivers/clk/Makefile         | 2 +-
>  drivers/clk/starfive/Kconfig | 6 +++---
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index e3ca0d058a25..3bed88d67a3a 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -117,7 +117,7 @@ obj-$(CONFIG_PLAT_SPEAR)		+= spear/
>  obj-y					+= sprd/
>  obj-$(CONFIG_ARCH_STI)			+= st/
>  obj-$(CONFIG_ARCH_STM32)		+= stm32/
> -obj-$(CONFIG_SOC_STARFIVE)		+= starfive/
> +obj-y					+= starfive/
>  obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
>  obj-y					+= sunxi-ng/
>  obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 003bd2d56ce7..ef3517f4a276 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -2,8 +2,8 @@
>  
>  config CLK_STARFIVE_JH7100
>  	bool "StarFive JH7100 clock support"
> -	depends on SOC_STARFIVE || COMPILE_TEST
> -	default SOC_STARFIVE
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	default ARCH_STARFIVE
>  	help
>  	  Say yes here to support the clock controller on the StarFive JH7100
>  	  SoC.
> @@ -11,7 +11,7 @@ config CLK_STARFIVE_JH7100
>  config CLK_STARFIVE_JH7100_AUDIO
>  	tristate "StarFive JH7100 audio clock support"
>  	depends on CLK_STARFIVE_JH7100
> -	default m if SOC_STARFIVE
> +	default m if ARCH_STARFIVE
>  	help
>  	  Say Y or M here to support the audio clocks on the StarFive JH7100
>  	  SoC.
>
diff mbox series

Patch

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..3bed88d67a3a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -117,7 +117,7 @@  obj-$(CONFIG_PLAT_SPEAR)		+= spear/
 obj-y					+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
 obj-$(CONFIG_ARCH_STM32)		+= stm32/
-obj-$(CONFIG_SOC_STARFIVE)		+= starfive/
+obj-y					+= starfive/
 obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
 obj-y					+= sunxi-ng/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index 003bd2d56ce7..ef3517f4a276 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -2,8 +2,8 @@ 
 
 config CLK_STARFIVE_JH7100
 	bool "StarFive JH7100 clock support"
-	depends on SOC_STARFIVE || COMPILE_TEST
-	default SOC_STARFIVE
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	default ARCH_STARFIVE
 	help
 	  Say yes here to support the clock controller on the StarFive JH7100
 	  SoC.
@@ -11,7 +11,7 @@  config CLK_STARFIVE_JH7100
 config CLK_STARFIVE_JH7100_AUDIO
 	tristate "StarFive JH7100 audio clock support"
 	depends on CLK_STARFIVE_JH7100
-	default m if SOC_STARFIVE
+	default m if ARCH_STARFIVE
 	help
 	  Say Y or M here to support the audio clocks on the StarFive JH7100
 	  SoC.