@@ -568,7 +568,6 @@ config MIPS_MALTA
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
@@ -2270,15 +2269,10 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
-config MIPS_VPE_LOADER_CMP
- bool
- default "y"
- depends on MIPS_VPE_LOADER && MIPS_CMP
-
config MIPS_VPE_LOADER_MT
bool
default "y"
- depends on MIPS_VPE_LOADER && !MIPS_CMP
+ depends on MIPS_VPE_LOADER
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
@@ -2294,31 +2288,10 @@ config MIPS_VPE_APSP_API
bool "Enable support for AP/SP API (RTLX)"
depends on MIPS_VPE_LOADER
-config MIPS_VPE_APSP_API_CMP
- bool
- default "y"
- depends on MIPS_VPE_APSP_API && MIPS_CMP
-
config MIPS_VPE_APSP_API_MT
bool
default "y"
- depends on MIPS_VPE_APSP_API && !MIPS_CMP
-
-config MIPS_CMP
- bool "MIPS CMP framework support (DEPRECATED)"
- depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
- select SMP
- select SYNC_R4K
- select SYS_SUPPORTS_SMP
- select WEAK_ORDERING
- default n
- help
- Select this if you are using a bootloader which implements the "CMP
- framework" protocol (ie. YAMON) and want your kernel to make use of
- its ability to start secondary CPUs.
-
- Unless you have a specific need, you should use CONFIG_MIPS_CPS
- instead of this.
+ depends on MIPS_VPE_APSP_API
config MIPS_CPS
bool "MIPS Coherent Processing System support"
@@ -2774,9 +2747,6 @@ config HOTPLUG_CPU
config SMP_UP
bool
-config SYS_SUPPORTS_MIPS_CMP
- bool
-
config SYS_SUPPORTS_MIPS_CPS
bool
@@ -81,7 +81,6 @@ struct rtlx_channel {
extern struct rtlx_info {
unsigned long id;
enum rtlx_state state;
- int ap_int_pending; /* Status of 0 or 1 for CONFIG_MIPS_CMP only */
struct rtlx_channel channel[RTLX_CHANNELS];
} *rtlx;
@@ -80,22 +80,6 @@ static inline int register_up_smp_ops(void)
#endif
}
-static inline int register_cmp_smp_ops(void)
-{
-#ifdef CONFIG_MIPS_CMP
- extern const struct plat_smp_ops cmp_smp_ops;
-
- if (!mips_cm_present())
- return -ENODEV;
-
- register_smp_ops(&cmp_smp_ops);
-
- return 0;
-#else
- return -ENODEV;
-#endif
-}
-
static inline int register_vsmp_smp_ops(void)
{
#ifdef CONFIG_MIPS_MT_SMP
@@ -29,12 +29,8 @@
static inline int aprp_cpu_index(void)
{
-#ifdef CONFIG_MIPS_CMP
- return setup_max_cpus;
-#else
extern int tclimit;
return tclimit;
-#endif
}
enum vpe_state {
@@ -58,16 +58,13 @@ obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o bmips_5xxx_init.o
obj-$(CONFIG_MIPS_MT) += mips-mt.o
obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
-obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o
obj-$(CONFIG_MIPS_CPS_NS16550) += cps-vec-ns16550.o
obj-$(CONFIG_MIPS_SPRAM) += spram.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
-obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
-obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
deleted file mode 100644
@@ -1,122 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-
-#include <asm/mips_mt.h>
-#include <asm/vpe.h>
-#include <asm/rtlx.h>
-
-static int major;
-
-static void rtlx_interrupt(void)
-{
- int i;
- struct rtlx_info *info;
- struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
-
- if (p == NULL || *p == NULL)
- return;
-
- info = *p;
-
- if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
- for (i = 0; i < RTLX_CHANNELS; i++) {
- wake_up(&channel_wqs[i].lx_queue);
- wake_up(&channel_wqs[i].rt_queue);
- }
- info->ap_int_pending = 0;
- }
-}
-
-void _interrupt_sp(void)
-{
- smp_send_reschedule(aprp_cpu_index());
-}
-
-int __init rtlx_module_init(void)
-{
- struct device *dev;
- int i, err;
-
- if (!cpu_has_mipsmt) {
- pr_warn("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (num_possible_cpus() - aprp_cpu_index() < 1) {
- pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
- "Pass maxcpus=<n> argument as kernel argument\n");
-
- return -ENODEV;
- }
-
- major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
- if (major < 0) {
- pr_err("rtlx_module_init: unable to register device\n");
- return major;
- }
-
- /* initialise the wait queues */
- for (i = 0; i < RTLX_CHANNELS; i++) {
- init_waitqueue_head(&channel_wqs[i].rt_queue);
- init_waitqueue_head(&channel_wqs[i].lx_queue);
- atomic_set(&channel_wqs[i].in_open, 0);
- mutex_init(&channel_wqs[i].mutex);
-
- dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
- "%s%d", RTLX_MODULE_NAME, i);
- if (IS_ERR(dev)) {
- while (i--)
- device_destroy(mt_class, MKDEV(major, i));
-
- err = PTR_ERR(dev);
- goto out_chrdev;
- }
- }
-
- /* set up notifiers */
- rtlx_notify.start = rtlx_starting;
- rtlx_notify.stop = rtlx_stopping;
- vpe_notify(aprp_cpu_index(), &rtlx_notify);
-
- if (cpu_has_vint) {
- aprp_hook = rtlx_interrupt;
- } else {
- pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
- err = -ENODEV;
- goto out_class;
- }
-
- return 0;
-
-out_class:
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-out_chrdev:
- unregister_chrdev(major, RTLX_MODULE_NAME);
-
- return err;
-}
-
-void __exit rtlx_module_exit(void)
-{
- int i;
-
- for (i = 0; i < RTLX_CHANNELS; i++)
- device_destroy(mt_class, MKDEV(major, i));
-
- unregister_chrdev(major, RTLX_MODULE_NAME);
-
- aprp_hook = NULL;
-}
deleted file mode 100644
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- * Chris Dearman (chris@mips.com)
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/sched/task_stack.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips_mt.h>
-#include <asm/amon.h>
-
-static void cmp_init_secondary(void)
-{
- struct cpuinfo_mips *c __maybe_unused = ¤t_cpu_data;
-
- /* Assume GIC is present */
- change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
- STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
-
- /* Enable per-cpu interrupts: platform specific */
-
-#ifdef CONFIG_MIPS_MT_SMP
- if (cpu_has_mipsmt)
- cpu_set_vpe_id(c, (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
- TCBIND_CURVPE);
-#endif
-}
-
-static void cmp_smp_finish(void)
-{
- pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
- /* CDFIXME: remove this? */
- write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
-
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
- local_irq_enable();
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it running
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- */
-static int cmp_boot_secondary(int cpu, struct task_struct *idle)
-{
- struct thread_info *gp = task_thread_info(idle);
- unsigned long sp = __KSTK_TOS(idle);
- unsigned long pc = (unsigned long)&smp_bootstrap;
- unsigned long a0 = 0;
-
- pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
- __func__, cpu);
-
-#if 0
- /* Needed? */
- flush_icache_range((unsigned long)gp,
- (unsigned long)(gp + sizeof(struct thread_info)));
-#endif
-
- amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
- return 0;
-}
-
-/*
- * Common setup before any secondaries are started
- */
-void __init cmp_smp_setup(void)
-{
- int i;
- int ncpu = 0;
-
- pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* If we have an FPU, enroll ourselves in the FPU-full mask */
- if (cpu_has_fpu)
- cpumask_set_cpu(0, &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
- for (i = 1; i < NR_CPUS; i++) {
- if (amon_cpu_avail(i)) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = ++ncpu;
- __cpu_logical_map[ncpu] = i;
- }
- }
-
- if (cpu_has_mipsmt) {
- unsigned int nvpe = 1;
-#ifdef CONFIG_MIPS_MT_SMP
- unsigned int mvpconf0 = read_c0_mvpconf0();
-
- nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-#endif
- smp_num_siblings = nvpe;
- }
- pr_info("Detected %i available secondary CPU(s)\n", ncpu);
-}
-
-void __init cmp_prepare_cpus(unsigned int max_cpus)
-{
- pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
- smp_processor_id(), __func__, max_cpus);
-
-#ifdef CONFIG_MIPS_MT
- /*
- * FIXME: some of these options are per-system, some per-core and
- * some per-cpu
- */
- mips_mt_set_cpuoptions();
-#endif
-
-}
-
-const struct plat_smp_ops cmp_smp_ops = {
- .send_ipi_single = mips_smp_send_ipi_single,
- .send_ipi_mask = mips_smp_send_ipi_mask,
- .init_secondary = cmp_init_secondary,
- .smp_finish = cmp_smp_finish,
- .boot_secondary = cmp_boot_secondary,
- .smp_setup = cmp_smp_setup,
- .prepare_cpus = cmp_prepare_cpus,
-};
deleted file mode 100644
@@ -1,180 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/vpe.h>
-
-static int major;
-
-void cleanup_tc(struct tc *tc)
-{
-
-}
-
-static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
- struct vpe_notifications *notifier;
-
- list_for_each_entry(notifier, &vpe->notify, list)
- notifier->stop(aprp_cpu_index());
-
- release_progmem(vpe->load_addr);
- vpe->state = VPE_STATE_UNUSED;
-
- return len;
-}
-static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
-
-static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
- char *buf)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
-
- return sprintf(buf, "%d\n", vpe->ntcs);
-}
-
-static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-{
- struct vpe *vpe = get_vpe(aprp_cpu_index());
- unsigned long new;
- int ret;
-
- ret = kstrtoul(buf, 0, &new);
- if (ret < 0)
- return ret;
-
- /* APRP can only reserve one TC in a VPE and no more. */
- if (new != 1)
- return -EINVAL;
-
- vpe->ntcs = new;
-
- return len;
-}
-static DEVICE_ATTR_RW(ntcs);
-
-static struct attribute *vpe_attrs[] = {
- &dev_attr_kill.attr,
- &dev_attr_ntcs.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(vpe);
-
-static void vpe_device_release(struct device *cd)
-{
-}
-
-static struct class vpe_class = {
- .name = "vpe",
- .owner = THIS_MODULE,
- .dev_release = vpe_device_release,
- .dev_groups = vpe_groups,
-};
-
-static struct device vpe_device;
-
-int __init vpe_module_init(void)
-{
- struct vpe *v = NULL;
- struct tc *t;
- int err;
-
- if (!cpu_has_mipsmt) {
- pr_warn("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-
- if (num_possible_cpus() - aprp_cpu_index() < 1) {
- pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
- "Pass maxcpus=<n> argument as kernel argument\n");
- return -ENODEV;
- }
-
- major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
- if (major < 0) {
- pr_warn("VPE loader: unable to register character device\n");
- return major;
- }
-
- err = class_register(&vpe_class);
- if (err) {
- pr_err("vpe_class registration failed\n");
- goto out_chrdev;
- }
-
- device_initialize(&vpe_device);
- vpe_device.class = &vpe_class;
- vpe_device.parent = NULL;
- dev_set_name(&vpe_device, "vpe_sp");
- vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
- err = device_add(&vpe_device);
- if (err) {
- pr_err("Adding vpe_device failed\n");
- goto out_class;
- }
-
- t = alloc_tc(aprp_cpu_index());
- if (!t) {
- pr_warn("VPE: unable to allocate TC\n");
- err = -ENOMEM;
- goto out_dev;
- }
-
- /* VPE */
- v = alloc_vpe(aprp_cpu_index());
- if (v == NULL) {
- pr_warn("VPE: unable to allocate VPE\n");
- kfree(t);
- err = -ENOMEM;
- goto out_dev;
- }
-
- v->ntcs = 1;
-
- /* add the tc to the list of this vpe's tc's. */
- list_add(&t->tc, &v->tc);
-
- /* TC */
- t->pvpe = v; /* set the parent vpe */
-
- return 0;
-
-out_dev:
- device_del(&vpe_device);
-
-out_class:
- put_device(&vpe_device);
- class_unregister(&vpe_class);
-
-out_chrdev:
- unregister_chrdev(major, VPE_MODULE_NAME);
-
- return err;
-}
-
-void __exit vpe_module_exit(void)
-{
- struct vpe *v, *n;
-
- device_unregister(&vpe_device);
- class_unregister(&vpe_class);
- unregister_chrdev(major, VPE_MODULE_NAME);
-
- /* No locking needed here */
- list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
- if (v->state != VPE_STATE_UNUSED)
- release_vpe(v);
-}
@@ -795,7 +795,7 @@ static int vpe_open(struct inode *inode, struct file *filp)
static int vpe_release(struct inode *inode, struct file *filp)
{
-#if defined(CONFIG_MIPS_VPE_LOADER_MT) || defined(CONFIG_MIPS_VPE_LOADER_CMP)
+#ifdef CONFIG_MIPS_VPE_LOADER_MT
struct vpe *v;
Elf_Ehdr *hdr;
int ret = 0;
@@ -14,6 +14,4 @@ obj-y += malta-platform.o
obj-y += malta-setup.o
obj-y += malta-time.o
-obj-$(CONFIG_MIPS_CMP) += malta-amon.o
-
CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
deleted file mode 100644
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- *
- * Arbitrary Monitor Interface
- */
-#include <linux/kernel.h>
-#include <linux/smp.h>
-
-#include <asm/addrspace.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips-boards/launch.h>
-#include <asm/vpe.h>
-
-int amon_cpu_avail(int cpu)
-{
- struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
- if (cpu < 0 || cpu >= NCPULAUNCH) {
- pr_debug("avail: cpu%d is out of range\n", cpu);
- return 0;
- }
-
- launch += cpu;
- if (!(launch->flags & LAUNCH_FREADY)) {
- pr_debug("avail: cpu%d is not ready\n", cpu);
- return 0;
- }
- if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
- pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
- return 0;
- }
-
- return 1;
-}
-
-int amon_cpu_start(int cpu,
- unsigned long pc, unsigned long sp,
- unsigned long gp, unsigned long a0)
-{
- volatile struct cpulaunch *launch =
- (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
- if (!amon_cpu_avail(cpu))
- return -1;
- if (cpu == smp_processor_id()) {
- pr_debug("launch: I am cpu%d!\n", cpu);
- return -1;
- }
- launch += cpu;
-
- pr_debug("launch: starting cpu%d\n", cpu);
-
- launch->pc = pc;
- launch->gp = gp;
- launch->sp = sp;
- launch->a0 = a0;
-
- smp_wmb(); /* Target must see parameters before go */
- launch->flags |= LAUNCH_FGO;
- smp_wmb(); /* Target must see go before we poll */
-
- while ((launch->flags & LAUNCH_FGONE) == 0)
- ;
- smp_rmb(); /* Target will be updating flags soon */
- pr_debug("launch: cpu%d gone!\n", cpu);
-
- return 0;
-}
-
-#ifdef CONFIG_MIPS_VPE_LOADER_CMP
-int vpe_run(struct vpe *v)
-{
- struct vpe_notifications *n;
-
- if (amon_cpu_start(aprp_cpu_index(), v->__start, 0, 0, 0) < 0)
- return -1;
-
- list_for_each_entry(n, &v->notify, list)
- n->start(VPE_MODULE_MINOR);
-
- return 0;
-}
-#endif
@@ -289,8 +289,6 @@ void __init prom_init(void)
if (!register_cps_smp_ops())
return;
- if (!register_cmp_smp_ops())
- return;
if (!register_vsmp_smp_ops())
return;
register_up_smp_ops();
@@ -43,7 +43,6 @@
static struct plat_serial8250_port uart8250_data[] = {
SMC_PORT(0x3F8, 4),
SMC_PORT(0x2F8, 3),
-#ifndef CONFIG_MIPS_CMP
{
.mapbase = 0x1f000900, /* The CBUS UART */
.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
@@ -53,7 +52,6 @@ static struct plat_serial8250_port uart8250_data[] = {
.flags = CBUS_UART_FLAGS,
.regshift = 3,
},
-#endif
{ },
};
@@ -217,8 +217,6 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
if (!register_cps_smp_ops())
return;
- if (!register_cmp_smp_ops())
- return;
if (!register_vsmp_smp_ops())
return;
}
@@ -54,7 +54,6 @@ static DEFINE_SPINLOCK(gic_lock);
static struct irq_domain *gic_irq_domain;
static int gic_shared_intrs;
static unsigned int gic_cpu_pin;
-static unsigned int timer_cpu_pin;
static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
#ifdef CONFIG_GENERIC_IRQ_IPI
@@ -499,9 +498,6 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq,
*/
switch (intr) {
case GIC_LOCAL_INT_TIMER:
- /* CONFIG_MIPS_CMP workaround (see __gic_init) */
- map = GIC_MAP_PIN_MAP_TO_PIN | timer_cpu_pin;
- fallthrough;
case GIC_LOCAL_INT_PERFCTR:
case GIC_LOCAL_INT_FDC:
/*
@@ -795,34 +791,12 @@ static int __init gic_of_init(struct device_node *node,
if (cpu_has_veic) {
/* Always use vector 1 in EIC mode */
gic_cpu_pin = 0;
- timer_cpu_pin = gic_cpu_pin;
set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET,
__gic_irq_dispatch);
} else {
gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET;
irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec,
gic_irq_dispatch);
- /*
- * With the CMP implementation of SMP (deprecated), other CPUs
- * are started by the bootloader and put into a timer based
- * waiting poll loop. We must not re-route those CPU's local
- * timer interrupts as the wait instruction will never finish,
- * so just handle whatever CPU interrupt it is routed to by
- * default.
- *
- * This workaround should be removed when CMP support is
- * dropped.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMP) &&
- gic_local_irq_is_routable(GIC_LOCAL_INT_TIMER)) {
- timer_cpu_pin = read_gic_vl_timer_map() & GIC_MAP_PIN_MAP;
- irq_set_chained_handler(MIPS_CPU_IRQ_BASE +
- GIC_CPU_PIN_OFFSET +
- timer_cpu_pin,
- gic_irq_dispatch);
- } else {
- timer_cpu_pin = gic_cpu_pin;
- }
}
gic_irq_domain = irq_domain_add_simple(node, GIC_NUM_LOCAL_INTRS +
Commit 5cac93b35c14 ("MIPS: Deprecate CONFIG_MIPS_CMP") deprecated CONFIG_MIPS_CMP and after 9 years it's time to remove it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- Marc, if you prefer an extra patch for the irqchip change, I'll split this. Otherwise I would take it through the MIPS tree. arch/mips/Kconfig | 34 +---- arch/mips/include/asm/rtlx.h | 1 - arch/mips/include/asm/smp-ops.h | 16 --- arch/mips/include/asm/vpe.h | 4 - arch/mips/kernel/Makefile | 3 - arch/mips/kernel/rtlx-cmp.c | 122 ------------------ arch/mips/kernel/smp-cmp.c | 148 ---------------------- arch/mips/kernel/vpe-cmp.c | 180 --------------------------- arch/mips/kernel/vpe.c | 2 +- arch/mips/mti-malta/Makefile | 2 - arch/mips/mti-malta/malta-amon.c | 88 ------------- arch/mips/mti-malta/malta-init.c | 2 - arch/mips/mti-malta/malta-platform.c | 2 - arch/mips/ralink/mt7621.c | 2 - drivers/irqchip/irq-mips-gic.c | 26 ---- 15 files changed, 3 insertions(+), 629 deletions(-) delete mode 100644 arch/mips/kernel/rtlx-cmp.c delete mode 100644 arch/mips/kernel/smp-cmp.c delete mode 100644 arch/mips/kernel/vpe-cmp.c delete mode 100644 arch/mips/mti-malta/malta-amon.c