diff mbox series

[v5,2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Message ID 20230405191633.1864671-3-bhupesh.sharma@linaro.org (mailing list archive)
State Superseded
Headers show
Series Enable USB SS qmp phy for Qualcomm SM6115 SoC | expand

Commit Message

Bhupesh Sharma April 5, 2023, 7:16 p.m. UTC 
Add USB superspeed qmp phy node to dtsi.

Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 36 +++++++++++++++++--
 .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
 3 files changed, 40 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov April 5, 2023, 7:36 p.m. UTC | #1 
On Wed, 5 Apr 2023 at 22:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
>
> Add USB superspeed qmp phy node to dtsi.
>
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>  arch/arm64/boot/dts/qcom/sm6115.dtsi          | 36 +++++++++++++++++--
>  .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>  3 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
>  &usb_dwc3 {
>         maximum-speed = "high-speed";
>         dr_mode = "peripheral";
> +
> +       phys = <&usb_hsphy>;
> +       phy-names = "usb2-phy";
>  };
>
>  &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 2a51c938bbcb..b2fa565e4816 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -650,6 +650,38 @@ usb_hsphy: phy@1613000 {
>                         status = "disabled";
>                 };
>
> +               usb_qmpphy: phy@1615000 {
> +                       compatible = "qcom,sm6115-qmp-usb3-phy";
> +                       reg = <0x0 0x01615000 0x0 0x200>;
> +                       clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +                                <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> +                       clock-names = "cfg_ahb",
> +                                     "ref",
> +                                     "com_aux";
> +                       resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>,
> +                                <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
> +                       reset-names = "phy_phy", "phy";
> +                       status = "disabled";
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +
> +                       usb_ssphy: phy@1615200 {
> +                               reg = <0x0 0x01615200 0x0 0x200>,
> +                                     <0x0 0x01615400 0x0 0x200>,
> +                                     <0x0 0x01615c00 0x0 0x400>,
> +                                     <0x0 0x01615600 0x0 0x200>,
> +                                     <0x0 0x01615800 0x0 0x200>,
> +                                     <0x0 0x01615a00 0x0 0x100>;
> +                               #clock-cells = <0>;
> +                               #phy-cells = <0>;
> +                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +                               clock-names = "pipe0";
> +                               clock-output-names = "usb3_phy_pipe_clk_src";
> +                       };
> +               };

I can repeat previous message:

Please update this to newer style bindings (see
qcom,sc8280xp-qmp-usb3-uni-phy.yaml).

We are going to switch all QMP PHYs to use a newer style of bindings.
I have started the work to convert existing usecases. As you are
adding a new DT node, please add it in a good shape from the
beginning.


> +
>                 qfprom@1b40000 {
>                         compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>                         reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1100,8 +1132,8 @@ usb_dwc3: usb@4e00000 {
>                                 compatible = "snps,dwc3";
>                                 reg = <0x0 0x04e00000 0x0 0xcd00>;
>                                 interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -                               phys = <&usb_hsphy>;
> -                               phy-names = "usb2-phy";
> +                               phys = <&usb_hsphy>, <&usb_ssphy>;
> +                               phy-names = "usb2-phy", "usb3-phy";
>                                 iommus = <&apps_smmu 0x120 0x0>;
>                                 snps,dis_u2_susphy_quirk;
>                                 snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index 10c9d338446c..d60cc024749b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -280,6 +280,9 @@ &usb {
>  &usb_dwc3 {
>         maximum-speed = "high-speed";
>         dr_mode = "peripheral";
> +
> +       phys = <&usb_hsphy>;
> +       phy-names = "usb2-phy";
>  };
>
>  &usb_hsphy {
> --
> 2.38.1
>
Bhupesh Sharma April 5, 2023, 7:55 p.m. UTC | #2 
On Thu, 6 Apr 2023 at 01:06, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Wed, 5 Apr 2023 at 22:19, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
> >
> > Add USB superspeed qmp phy node to dtsi.
> >
> > Make sure that the various board dts files (which include sm4250.dtsi file)
> > continue to work as intended.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
> >  arch/arm64/boot/dts/qcom/sm6115.dtsi          | 36 +++++++++++++++++--
> >  .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
> >  3 files changed, 40 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > index a1f0622db5a0..75951fd439df 100644
> > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > @@ -242,6 +242,9 @@ &usb {
> >  &usb_dwc3 {
> >         maximum-speed = "high-speed";
> >         dr_mode = "peripheral";
> > +
> > +       phys = <&usb_hsphy>;
> > +       phy-names = "usb2-phy";
> >  };
> >
> >  &usb_hsphy {
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index 2a51c938bbcb..b2fa565e4816 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -650,6 +650,38 @@ usb_hsphy: phy@1613000 {
> >                         status = "disabled";
> >                 };
> >
> > +               usb_qmpphy: phy@1615000 {
> > +                       compatible = "qcom,sm6115-qmp-usb3-phy";
> > +                       reg = <0x0 0x01615000 0x0 0x200>;
> > +                       clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> > +                                <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> > +                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> > +                       clock-names = "cfg_ahb",
> > +                                     "ref",
> > +                                     "com_aux";
> > +                       resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>,
> > +                                <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
> > +                       reset-names = "phy_phy", "phy";
> > +                       status = "disabled";
> > +                       #address-cells = <2>;
> > +                       #size-cells = <2>;
> > +                       ranges;
> > +
> > +                       usb_ssphy: phy@1615200 {
> > +                               reg = <0x0 0x01615200 0x0 0x200>,
> > +                                     <0x0 0x01615400 0x0 0x200>,
> > +                                     <0x0 0x01615c00 0x0 0x400>,
> > +                                     <0x0 0x01615600 0x0 0x200>,
> > +                                     <0x0 0x01615800 0x0 0x200>,
> > +                                     <0x0 0x01615a00 0x0 0x100>;
> > +                               #clock-cells = <0>;
> > +                               #phy-cells = <0>;
> > +                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> > +                               clock-names = "pipe0";
> > +                               clock-output-names = "usb3_phy_pipe_clk_src";
> > +                       };
> > +               };
>
> I can repeat previous message:
>
> Please update this to newer style bindings (see
> qcom,sc8280xp-qmp-usb3-uni-phy.yaml).
>
> We are going to switch all QMP PHYs to use a newer style of bindings.
> I have started the work to convert existing usecases. As you are
> adding a new DT node, please add it in a good shape from the
> beginning.

Your earlier message was not clear and I sent out a reply for the
cover letter query you had, but got no reply. I think a pointer to
<https://patchwork.kernel.org/project/linux-phy/list/?series=733714>
would have been more clear.

I will rework and send v6 accordingly.

Thanks,
Bhupesh
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a1f0622db5a0..75951fd439df 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -242,6 +242,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2a51c938bbcb..b2fa565e4816 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -650,6 +650,38 @@  usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x200>;
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux";
+			resets = <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy_phy", "phy";
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			usb_ssphy: phy@1615200 {
+				reg = <0x0 0x01615200 0x0 0x200>,
+				      <0x0 0x01615400 0x0 0x200>,
+				      <0x0 0x01615c00 0x0 0x400>,
+				      <0x0 0x01615600 0x0 0x200>,
+				      <0x0 0x01615800 0x0 0x200>,
+				      <0x0 0x01615a00 0x0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -1100,8 +1132,8 @@  usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 10c9d338446c..d60cc024749b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -280,6 +280,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {