| Message ID | 20230407081657.17947-2-faithilikerun@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add zone append write for zoned device | expand |
On Fri, Apr 07, 2023 at 04:16:54PM +0800, Sam Li wrote: > Since Linux doesn't have a user API to issue zone append operations to > zoned devices from user space, the file-posix driver is modified to add > zone append emulation using regular writes. To do this, the file-posix > driver tracks the wp location of all zones of the device. It uses an > array of uint64_t. The most significant bit of each wp location indicates > if the zone type is conventional zones. > > The zones wp can be changed due to the following operations issued: > - zone reset: change the wp to the start offset of that zone > - zone finish: change to the end location of that zone > - write to a zone > - zone append > > Signed-off-by: Sam Li <faithilikerun@gmail.com> > --- > block/file-posix.c | 173 ++++++++++++++++++++++++++++++- > include/block/block-common.h | 14 +++ > include/block/block_int-common.h | 5 + > 3 files changed, 189 insertions(+), 3 deletions(-) > > diff --git a/block/file-posix.c b/block/file-posix.c > index 65efe5147e..e7957f5559 100644 > --- a/block/file-posix.c > +++ b/block/file-posix.c > @@ -1324,6 +1324,90 @@ static int hdev_get_max_segments(int fd, struct stat *st) > #endif > } > > +#if defined(CONFIG_BLKZONED) > +/* > + * If the reset_all flag is true, then the wps of zone whose state is > + * not readonly or offline should be all reset to the start sector. > + * Else, take the real wp of the device. > + */ > +static int get_zones_wp(BlockDriverState *bs, int fd, int64_t offset, > + unsigned int nrz, bool reset_all) > +{ > + struct blk_zone *blkz; > + size_t rep_size; > + uint64_t sector = offset >> BDRV_SECTOR_BITS; > + BlockZoneWps *wps = bs->wps; > + int j = offset / bs->bl.zone_size; > + int ret, n = 0, i = 0; I would feel more comfortable if i, j, and n were unsigned int like nrz. That way we don't need to worry about negative array indices when int wraps to INT_MIN. In practice we'll probably hit scalability problems before nrz becomes greater than INT_MAX. Also, such devices probably don't exist. A 5 TB drive with 256 MB zones only has 20,480 zones. So for now I think you can keep the code the way it is. > + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct blk_zone); > + g_autofree struct blk_zone_report *rep = NULL; > + > + rep = g_malloc(rep_size); > + blkz = (struct blk_zone *)(rep + 1); > + while (n < nrz) { > + memset(rep, 0, rep_size); > + rep->sector = sector; > + rep->nr_zones = nrz - n; > + > + do { > + ret = ioctl(fd, BLKREPORTZONE, rep); > + } while (ret != 0 && errno == EINTR); > + if (ret != 0) { > + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed %d", > + fd, offset, errno); > + return -errno; > + } > + > + if (!rep->nr_zones) { > + break; > + } > + > + for (i = 0; i < rep->nr_zones; ++i, ++n, ++j) { > + /* > + * The wp tracking cares only about sequential writes required and > + * sequential write preferred zones so that the wp can advance to > + * the right location. > + * Use the most significant bit of the wp location to indicate the > + * zone type: 0 for SWR/SWP zones and 1 for conventional zones. > + */ > + if (blkz[i].type == BLK_ZONE_TYPE_CONVENTIONAL) { > + wps->wp[j] |= 1ULL << 63; > + } else { > + switch(blkz[i].cond) { > + case BLK_ZONE_COND_FULL: > + case BLK_ZONE_COND_READONLY: > + /* Zone not writable */ > + wps->wp[j] = (blkz[i].start + blkz[i].len) << BDRV_SECTOR_BITS; > + break; > + case BLK_ZONE_COND_OFFLINE: > + /* Zone not writable nor readable */ > + wps->wp[j] = (blkz[i].start) << BDRV_SECTOR_BITS; > + break; > + default: > + if (reset_all) { > + wps->wp[j] = blkz[i].start << BDRV_SECTOR_BITS; > + } else { > + wps->wp[j] = blkz[i].wp << BDRV_SECTOR_BITS; > + } > + break; > + } > + } > + } > + sector = blkz[i - 1].start + blkz[i - 1].len; > + } > + > + return 0; > +} > + > +static void update_zones_wp(BlockDriverState *bs, int fd, int64_t offset, > + unsigned int nrz) > +{ > + if (get_zones_wp(bs, fd, offset, nrz, 0) < 0) { > + error_report("update zone wp failed"); > + } > +} > +#endif > + > static void raw_refresh_limits(BlockDriverState *bs, Error **errp) > { > BDRVRawState *s = bs->opaque; > @@ -1413,6 +1497,23 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp) > if (ret >= 0) { > bs->bl.max_active_zones = ret; > } > + > + ret = get_sysfs_long_val(&st, "physical_block_size"); > + if (ret >= 0) { > + bs->bl.write_granularity = ret; > + } > + > + /* The refresh_limits() function can be called multiple times. */ > + g_free(bs->wps); > + bs->wps = g_malloc(sizeof(BlockZoneWps) + > + sizeof(int64_t) * bs->bl.nr_zones); > + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 0); > + if (ret < 0) { > + error_setg_errno(errp, -ret, "report wps failed"); > + bs->wps = NULL; > + return; > + } > + qemu_co_mutex_init(&bs->wps->colock); I suggest moving qemu_co_mutex_init() to raw_open_common() in the future to eliminate the assumption that raw_refresh_limits() is called before other functions that use colock. But there is no need to resend the patch series. > return; > } > out: > @@ -2338,9 +2439,15 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > { > BDRVRawState *s = bs->opaque; > RawPosixAIOData acb; > + int ret; > > if (fd_open(bs) < 0) > return -EIO; > +#if defined(CONFIG_BLKZONED) > + if (type & QEMU_AIO_WRITE && bs->wps) { > + qemu_co_mutex_lock(&bs->wps->colock); > + } > +#endif > > /* > * When using O_DIRECT, the request must be aligned to be able to use > @@ -2354,14 +2461,16 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > } else if (s->use_linux_io_uring) { > LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); > assert(qiov->size == bytes); > - return luring_co_submit(bs, aio, s->fd, offset, qiov, type); > + ret = luring_co_submit(bs, aio, s->fd, offset, qiov, type); > + goto out; > #endif > #ifdef CONFIG_LINUX_AIO > } else if (s->use_linux_aio) { > LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); > assert(qiov->size == bytes); > - return laio_co_submit(bs, aio, s->fd, offset, qiov, type, > + ret = laio_co_submit(bs, aio, s->fd, offset, qiov, type, > s->aio_max_batch); > + goto out; > #endif > } > > @@ -2378,7 +2487,32 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > }; > > assert(qiov->size == bytes); > - return raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); > + ret = raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); > + > +out: > +#if defined(CONFIG_BLKZONED) > + BlockZoneWps *wps = bs->wps; > + if (ret == 0) { > + if (type & QEMU_AIO_WRITE && wps && bs->bl.zone_size) { > + uint64_t *wp = &wps->wp[offset / bs->bl.zone_size]; > + if (!BDRV_ZT_IS_CONV(*wp)) { > + /* Advance the wp if needed */ > + if (offset + bytes > *wp) { > + *wp = offset + bytes; > + } > + } > + } > + } else { > + if (type & QEMU_AIO_WRITE) { > + update_zones_wp(bs, s->fd, 0, 1); > + } > + } > + > + if (type & QEMU_AIO_WRITE && wps) { > + qemu_co_mutex_unlock(&wps->colock); > + } > +#endif > + return ret; > } > > static int coroutine_fn raw_co_preadv(BlockDriverState *bs, int64_t offset, > @@ -2486,6 +2620,9 @@ static void raw_close(BlockDriverState *bs) > BDRVRawState *s = bs->opaque; > > if (s->fd >= 0) { > +#if defined(CONFIG_BLKZONED) > + g_free(bs->wps); > +#endif > qemu_close(s->fd); > s->fd = -1; > } > @@ -3283,6 +3420,7 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > const char *op_name; > unsigned long zo; > int ret; > + BlockZoneWps *wps = bs->wps; > int64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS; > > zone_size = bs->bl.zone_size; > @@ -3300,6 +3438,15 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > return -EINVAL; > } > > + QEMU_LOCK_GUARD(&wps->colock); > + uint32_t i = offset / bs->bl.zone_size; > + uint32_t nrz = len / bs->bl.zone_size; > + uint64_t *wp = &wps->wp[i]; > + if (BDRV_ZT_IS_CONV(*wp) && len != capacity) { > + error_report("zone mgmt operations are not allowed for conventional zones"); > + return -EIO; > + } > + > switch (op) { > case BLK_ZO_OPEN: > op_name = "BLKOPENZONE"; > @@ -3337,8 +3484,28 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > len >> BDRV_SECTOR_BITS); > ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb); > if (ret != 0) { > + update_zones_wp(bs, s->fd, offset, i); > ret = -errno; > error_report("ioctl %s failed %d", op_name, ret); > + return ret; > + } > + > + if (zo == BLKRESETZONE && len == capacity) { > + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 1); > + if (ret < 0) { > + error_report("reporting single wp failed"); > + return ret; > + } > + } else if (zo == BLKRESETZONE) { > + for (int j = 0; j < nrz; ++j) { > + wp[j] = offset + j * zone_size; > + } > + } else if (zo == BLKFINISHZONE) { > + for (int j = 0; j < nrz; ++j) { > + /* The zoned device allows the last zone smaller that the > + * zone size. */ > + wp[j] = MIN(offset + (j + 1) * zone_size, offset + len); > + } > } > > return ret; > diff --git a/include/block/block-common.h b/include/block/block-common.h > index 1576fcf2ed..93196229ac 100644 > --- a/include/block/block-common.h > +++ b/include/block/block-common.h > @@ -118,6 +118,14 @@ typedef struct BlockZoneDescriptor { > BlockZoneState state; > } BlockZoneDescriptor; > > +/* > + * Track write pointers of a zone in bytes. > + */ > +typedef struct BlockZoneWps { > + CoMutex colock; > + uint64_t wp[]; > +} BlockZoneWps; > + > typedef struct BlockDriverInfo { > /* in bytes, 0 if irrelevant */ > int cluster_size; > @@ -240,6 +248,12 @@ typedef enum { > #define BDRV_SECTOR_BITS 9 > #define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS) > > +/* > + * Get the first most significant bit of wp. If it is zero, then > + * the zone type is SWR. > + */ > +#define BDRV_ZT_IS_CONV(wp) (wp & (1ULL << 63)) > + > #define BDRV_REQUEST_MAX_SECTORS MIN_CONST(SIZE_MAX >> BDRV_SECTOR_BITS, \ > INT_MAX >> BDRV_SECTOR_BITS) > #define BDRV_REQUEST_MAX_BYTES (BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) > diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h > index 1bd2aef4d5..b34a7f175d 100644 > --- a/include/block/block_int-common.h > +++ b/include/block/block_int-common.h > @@ -884,6 +884,8 @@ typedef struct BlockLimits { > > /* maximum number of active zones */ > int64_t max_active_zones; > + > + int64_t write_granularity; > } BlockLimits; > > typedef struct BdrvOpBlocker BdrvOpBlocker; > @@ -1245,6 +1247,9 @@ struct BlockDriverState { > CoMutex bsc_modify_lock; > /* Always non-NULL, but must only be dereferenced under an RCU read guard */ > BdrvBlockStatusCache *block_status_cache; > + > + /* array of write pointers' location of each zone in the zoned device. */ > + BlockZoneWps *wps; > }; > > struct BlockBackendRootState { > -- > 2.39.2 >
Stefan Hajnoczi <stefanha@redhat.com> 于2023年4月10日周一 21:04写道： > > On Fri, Apr 07, 2023 at 04:16:54PM +0800, Sam Li wrote: > > Since Linux doesn't have a user API to issue zone append operations to > > zoned devices from user space, the file-posix driver is modified to add > > zone append emulation using regular writes. To do this, the file-posix > > driver tracks the wp location of all zones of the device. It uses an > > array of uint64_t. The most significant bit of each wp location indicates > > if the zone type is conventional zones. > > > > The zones wp can be changed due to the following operations issued: > > - zone reset: change the wp to the start offset of that zone > > - zone finish: change to the end location of that zone > > - write to a zone > > - zone append > > > > Signed-off-by: Sam Li <faithilikerun@gmail.com> > > --- > > block/file-posix.c | 173 ++++++++++++++++++++++++++++++- > > include/block/block-common.h | 14 +++ > > include/block/block_int-common.h | 5 + > > 3 files changed, 189 insertions(+), 3 deletions(-) > > > > diff --git a/block/file-posix.c b/block/file-posix.c > > index 65efe5147e..e7957f5559 100644 > > --- a/block/file-posix.c > > +++ b/block/file-posix.c > > @@ -1324,6 +1324,90 @@ static int hdev_get_max_segments(int fd, struct stat *st) > > #endif > > } > > > > +#if defined(CONFIG_BLKZONED) > > +/* > > + * If the reset_all flag is true, then the wps of zone whose state is > > + * not readonly or offline should be all reset to the start sector. > > + * Else, take the real wp of the device. > > + */ > > +static int get_zones_wp(BlockDriverState *bs, int fd, int64_t offset, > > + unsigned int nrz, bool reset_all) > > +{ > > + struct blk_zone *blkz; > > + size_t rep_size; > > + uint64_t sector = offset >> BDRV_SECTOR_BITS; > > + BlockZoneWps *wps = bs->wps; > > + int j = offset / bs->bl.zone_size; > > + int ret, n = 0, i = 0; > > I would feel more comfortable if i, j, and n were unsigned int like nrz. > That way we don't need to worry about negative array indices when int > wraps to INT_MIN. > > In practice we'll probably hit scalability problems before nrz becomes > greater than INT_MAX. Also, such devices probably don't exist. A 5 TB > drive with 256 MB zones only has 20,480 zones. > > So for now I think you can keep the code the way it is. > > > + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct blk_zone); > > + g_autofree struct blk_zone_report *rep = NULL; > > + > > + rep = g_malloc(rep_size); > > + blkz = (struct blk_zone *)(rep + 1); > > + while (n < nrz) { > > + memset(rep, 0, rep_size); > > + rep->sector = sector; > > + rep->nr_zones = nrz - n; > > + > > + do { > > + ret = ioctl(fd, BLKREPORTZONE, rep); > > + } while (ret != 0 && errno == EINTR); > > + if (ret != 0) { > > + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed %d", > > + fd, offset, errno); > > + return -errno; > > + } > > + > > + if (!rep->nr_zones) { > > + break; > > + } > > + > > + for (i = 0; i < rep->nr_zones; ++i, ++n, ++j) { > > + /* > > + * The wp tracking cares only about sequential writes required and > > + * sequential write preferred zones so that the wp can advance to > > + * the right location. > > + * Use the most significant bit of the wp location to indicate the > > + * zone type: 0 for SWR/SWP zones and 1 for conventional zones. > > + */ > > + if (blkz[i].type == BLK_ZONE_TYPE_CONVENTIONAL) { > > + wps->wp[j] |= 1ULL << 63; > > + } else { > > + switch(blkz[i].cond) { > > + case BLK_ZONE_COND_FULL: > > + case BLK_ZONE_COND_READONLY: > > + /* Zone not writable */ > > + wps->wp[j] = (blkz[i].start + blkz[i].len) << BDRV_SECTOR_BITS; > > + break; > > + case BLK_ZONE_COND_OFFLINE: > > + /* Zone not writable nor readable */ > > + wps->wp[j] = (blkz[i].start) << BDRV_SECTOR_BITS; > > + break; > > + default: > > + if (reset_all) { > > + wps->wp[j] = blkz[i].start << BDRV_SECTOR_BITS; > > + } else { > > + wps->wp[j] = blkz[i].wp << BDRV_SECTOR_BITS; > > + } > > + break; > > + } > > + } > > + } > > + sector = blkz[i - 1].start + blkz[i - 1].len; > > + } > > + > > + return 0; > > +} > > + > > +static void update_zones_wp(BlockDriverState *bs, int fd, int64_t offset, > > + unsigned int nrz) > > +{ > > + if (get_zones_wp(bs, fd, offset, nrz, 0) < 0) { > > + error_report("update zone wp failed"); > > + } > > +} > > +#endif > > + > > static void raw_refresh_limits(BlockDriverState *bs, Error **errp) > > { > > BDRVRawState *s = bs->opaque; > > @@ -1413,6 +1497,23 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp) > > if (ret >= 0) { > > bs->bl.max_active_zones = ret; > > } > > + > > + ret = get_sysfs_long_val(&st, "physical_block_size"); > > + if (ret >= 0) { > > + bs->bl.write_granularity = ret; > > + } > > + > > + /* The refresh_limits() function can be called multiple times. */ > > + g_free(bs->wps); > > + bs->wps = g_malloc(sizeof(BlockZoneWps) + > > + sizeof(int64_t) * bs->bl.nr_zones); > > + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 0); > > + if (ret < 0) { > > + error_setg_errno(errp, -ret, "report wps failed"); > > + bs->wps = NULL; > > + return; > > + } > > + qemu_co_mutex_init(&bs->wps->colock); > > I suggest moving qemu_co_mutex_init() to raw_open_common() in the future > to eliminate the assumption that raw_refresh_limits() is called before > other functions that use colock. But there is no need to resend the > patch series. Ok, I see. This can be done in the future. Thanks! > > > return; > > } > > out: > > @@ -2338,9 +2439,15 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > > { > > BDRVRawState *s = bs->opaque; > > RawPosixAIOData acb; > > + int ret; > > > > if (fd_open(bs) < 0) > > return -EIO; > > +#if defined(CONFIG_BLKZONED) > > + if (type & QEMU_AIO_WRITE && bs->wps) { > > + qemu_co_mutex_lock(&bs->wps->colock); > > + } > > +#endif > > > > /* > > * When using O_DIRECT, the request must be aligned to be able to use > > @@ -2354,14 +2461,16 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > > } else if (s->use_linux_io_uring) { > > LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); > > assert(qiov->size == bytes); > > - return luring_co_submit(bs, aio, s->fd, offset, qiov, type); > > + ret = luring_co_submit(bs, aio, s->fd, offset, qiov, type); > > + goto out; > > #endif > > #ifdef CONFIG_LINUX_AIO > > } else if (s->use_linux_aio) { > > LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); > > assert(qiov->size == bytes); > > - return laio_co_submit(bs, aio, s->fd, offset, qiov, type, > > + ret = laio_co_submit(bs, aio, s->fd, offset, qiov, type, > > s->aio_max_batch); > > + goto out; > > #endif > > } > > > > @@ -2378,7 +2487,32 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, > > }; > > > > assert(qiov->size == bytes); > > - return raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); > > + ret = raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); > > + > > +out: > > +#if defined(CONFIG_BLKZONED) > > + BlockZoneWps *wps = bs->wps; > > + if (ret == 0) { > > + if (type & QEMU_AIO_WRITE && wps && bs->bl.zone_size) { > > + uint64_t *wp = &wps->wp[offset / bs->bl.zone_size]; > > + if (!BDRV_ZT_IS_CONV(*wp)) { > > + /* Advance the wp if needed */ > > + if (offset + bytes > *wp) { > > + *wp = offset + bytes; > > + } > > + } > > + } > > + } else { > > + if (type & QEMU_AIO_WRITE) { > > + update_zones_wp(bs, s->fd, 0, 1); > > + } > > + } > > + > > + if (type & QEMU_AIO_WRITE && wps) { > > + qemu_co_mutex_unlock(&wps->colock); > > + } > > +#endif > > + return ret; > > } > > > > static int coroutine_fn raw_co_preadv(BlockDriverState *bs, int64_t offset, > > @@ -2486,6 +2620,9 @@ static void raw_close(BlockDriverState *bs) > > BDRVRawState *s = bs->opaque; > > > > if (s->fd >= 0) { > > +#if defined(CONFIG_BLKZONED) > > + g_free(bs->wps); > > +#endif > > qemu_close(s->fd); > > s->fd = -1; > > } > > @@ -3283,6 +3420,7 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > > const char *op_name; > > unsigned long zo; > > int ret; > > + BlockZoneWps *wps = bs->wps; > > int64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS; > > > > zone_size = bs->bl.zone_size; > > @@ -3300,6 +3438,15 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > > return -EINVAL; > > } > > > > + QEMU_LOCK_GUARD(&wps->colock); > > + uint32_t i = offset / bs->bl.zone_size; > > + uint32_t nrz = len / bs->bl.zone_size; > > + uint64_t *wp = &wps->wp[i]; > > + if (BDRV_ZT_IS_CONV(*wp) && len != capacity) { > > + error_report("zone mgmt operations are not allowed for conventional zones"); > > + return -EIO; > > + } > > + > > switch (op) { > > case BLK_ZO_OPEN: > > op_name = "BLKOPENZONE"; > > @@ -3337,8 +3484,28 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, > > len >> BDRV_SECTOR_BITS); > > ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb); > > if (ret != 0) { > > + update_zones_wp(bs, s->fd, offset, i); > > ret = -errno; > > error_report("ioctl %s failed %d", op_name, ret); > > + return ret; > > + } > > + > > + if (zo == BLKRESETZONE && len == capacity) { > > + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 1); > > + if (ret < 0) { > > + error_report("reporting single wp failed"); > > + return ret; > > + } > > + } else if (zo == BLKRESETZONE) { > > + for (int j = 0; j < nrz; ++j) { > > + wp[j] = offset + j * zone_size; > > + } > > + } else if (zo == BLKFINISHZONE) { > > + for (int j = 0; j < nrz; ++j) { > > + /* The zoned device allows the last zone smaller that the > > + * zone size. */ > > + wp[j] = MIN(offset + (j + 1) * zone_size, offset + len); > > + } > > } > > > > return ret; > > diff --git a/include/block/block-common.h b/include/block/block-common.h > > index 1576fcf2ed..93196229ac 100644 > > --- a/include/block/block-common.h > > +++ b/include/block/block-common.h > > @@ -118,6 +118,14 @@ typedef struct BlockZoneDescriptor { > > BlockZoneState state; > > } BlockZoneDescriptor; > > > > +/* > > + * Track write pointers of a zone in bytes. > > + */ > > +typedef struct BlockZoneWps { > > + CoMutex colock; > > + uint64_t wp[]; > > +} BlockZoneWps; > > + > > typedef struct BlockDriverInfo { > > /* in bytes, 0 if irrelevant */ > > int cluster_size; > > @@ -240,6 +248,12 @@ typedef enum { > > #define BDRV_SECTOR_BITS 9 > > #define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS) > > > > +/* > > + * Get the first most significant bit of wp. If it is zero, then > > + * the zone type is SWR. > > + */ > > +#define BDRV_ZT_IS_CONV(wp) (wp & (1ULL << 63)) > > + > > #define BDRV_REQUEST_MAX_SECTORS MIN_CONST(SIZE_MAX >> BDRV_SECTOR_BITS, \ > > INT_MAX >> BDRV_SECTOR_BITS) > > #define BDRV_REQUEST_MAX_BYTES (BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) > > diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h > > index 1bd2aef4d5..b34a7f175d 100644 > > --- a/include/block/block_int-common.h > > +++ b/include/block/block_int-common.h > > @@ -884,6 +884,8 @@ typedef struct BlockLimits { > > > > /* maximum number of active zones */ > > int64_t max_active_zones; > > + > > + int64_t write_granularity; > > } BlockLimits; > > > > typedef struct BdrvOpBlocker BdrvOpBlocker; > > @@ -1245,6 +1247,9 @@ struct BlockDriverState { > > CoMutex bsc_modify_lock; > > /* Always non-NULL, but must only be dereferenced under an RCU read guard */ > > BdrvBlockStatusCache *block_status_cache; > > + > > + /* array of write pointers' location of each zone in the zoned device. */ > > + BlockZoneWps *wps; > > }; > > > > struct BlockBackendRootState { > > -- > > 2.39.2 > >
diff --git a/block/file-posix.c b/block/file-posix.c index 65efe5147e..e7957f5559 100644 --- a/block/file-posix.c +++ b/block/file-posix.c @@ -1324,6 +1324,90 @@ static int hdev_get_max_segments(int fd, struct stat *st) #endif } +#if defined(CONFIG_BLKZONED) +/* + * If the reset_all flag is true, then the wps of zone whose state is + * not readonly or offline should be all reset to the start sector. + * Else, take the real wp of the device. + */ +static int get_zones_wp(BlockDriverState *bs, int fd, int64_t offset, + unsigned int nrz, bool reset_all) +{ + struct blk_zone *blkz; + size_t rep_size; + uint64_t sector = offset >> BDRV_SECTOR_BITS; + BlockZoneWps *wps = bs->wps; + int j = offset / bs->bl.zone_size; + int ret, n = 0, i = 0; + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct blk_zone); + g_autofree struct blk_zone_report *rep = NULL; + + rep = g_malloc(rep_size); + blkz = (struct blk_zone *)(rep + 1); + while (n < nrz) { + memset(rep, 0, rep_size); + rep->sector = sector; + rep->nr_zones = nrz - n; + + do { + ret = ioctl(fd, BLKREPORTZONE, rep); + } while (ret != 0 && errno == EINTR); + if (ret != 0) { + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed %d", + fd, offset, errno); + return -errno; + } + + if (!rep->nr_zones) { + break; + } + + for (i = 0; i < rep->nr_zones; ++i, ++n, ++j) { + /* + * The wp tracking cares only about sequential writes required and + * sequential write preferred zones so that the wp can advance to + * the right location. + * Use the most significant bit of the wp location to indicate the + * zone type: 0 for SWR/SWP zones and 1 for conventional zones. + */ + if (blkz[i].type == BLK_ZONE_TYPE_CONVENTIONAL) { + wps->wp[j] |= 1ULL << 63; + } else { + switch(blkz[i].cond) { + case BLK_ZONE_COND_FULL: + case BLK_ZONE_COND_READONLY: + /* Zone not writable */ + wps->wp[j] = (blkz[i].start + blkz[i].len) << BDRV_SECTOR_BITS; + break; + case BLK_ZONE_COND_OFFLINE: + /* Zone not writable nor readable */ + wps->wp[j] = (blkz[i].start) << BDRV_SECTOR_BITS; + break; + default: + if (reset_all) { + wps->wp[j] = blkz[i].start << BDRV_SECTOR_BITS; + } else { + wps->wp[j] = blkz[i].wp << BDRV_SECTOR_BITS; + } + break; + } + } + } + sector = blkz[i - 1].start + blkz[i - 1].len; + } + + return 0; +} + +static void update_zones_wp(BlockDriverState *bs, int fd, int64_t offset, + unsigned int nrz) +{ + if (get_zones_wp(bs, fd, offset, nrz, 0) < 0) { + error_report("update zone wp failed"); + } +} +#endif + static void raw_refresh_limits(BlockDriverState *bs, Error **errp) { BDRVRawState *s = bs->opaque; @@ -1413,6 +1497,23 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp) if (ret >= 0) { bs->bl.max_active_zones = ret; } + + ret = get_sysfs_long_val(&st, "physical_block_size"); + if (ret >= 0) { + bs->bl.write_granularity = ret; + } + + /* The refresh_limits() function can be called multiple times. */ + g_free(bs->wps); + bs->wps = g_malloc(sizeof(BlockZoneWps) + + sizeof(int64_t) * bs->bl.nr_zones); + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 0); + if (ret < 0) { + error_setg_errno(errp, -ret, "report wps failed"); + bs->wps = NULL; + return; + } + qemu_co_mutex_init(&bs->wps->colock); return; } out: @@ -2338,9 +2439,15 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, { BDRVRawState *s = bs->opaque; RawPosixAIOData acb; + int ret; if (fd_open(bs) < 0) return -EIO; +#if defined(CONFIG_BLKZONED) + if (type & QEMU_AIO_WRITE && bs->wps) { + qemu_co_mutex_lock(&bs->wps->colock); + } +#endif /* * When using O_DIRECT, the request must be aligned to be able to use @@ -2354,14 +2461,16 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, } else if (s->use_linux_io_uring) { LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs)); assert(qiov->size == bytes); - return luring_co_submit(bs, aio, s->fd, offset, qiov, type); + ret = luring_co_submit(bs, aio, s->fd, offset, qiov, type); + goto out; #endif #ifdef CONFIG_LINUX_AIO } else if (s->use_linux_aio) { LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs)); assert(qiov->size == bytes); - return laio_co_submit(bs, aio, s->fd, offset, qiov, type, + ret = laio_co_submit(bs, aio, s->fd, offset, qiov, type, s->aio_max_batch); + goto out; #endif } @@ -2378,7 +2487,32 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset, }; assert(qiov->size == bytes); - return raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); + ret = raw_thread_pool_submit(bs, handle_aiocb_rw, &acb); + +out: +#if defined(CONFIG_BLKZONED) + BlockZoneWps *wps = bs->wps; + if (ret == 0) { + if (type & QEMU_AIO_WRITE && wps && bs->bl.zone_size) { + uint64_t *wp = &wps->wp[offset / bs->bl.zone_size]; + if (!BDRV_ZT_IS_CONV(*wp)) { + /* Advance the wp if needed */ + if (offset + bytes > *wp) { + *wp = offset + bytes; + } + } + } + } else { + if (type & QEMU_AIO_WRITE) { + update_zones_wp(bs, s->fd, 0, 1); + } + } + + if (type & QEMU_AIO_WRITE && wps) { + qemu_co_mutex_unlock(&wps->colock); + } +#endif + return ret; } static int coroutine_fn raw_co_preadv(BlockDriverState *bs, int64_t offset, @@ -2486,6 +2620,9 @@ static void raw_close(BlockDriverState *bs) BDRVRawState *s = bs->opaque; if (s->fd >= 0) { +#if defined(CONFIG_BLKZONED) + g_free(bs->wps); +#endif qemu_close(s->fd); s->fd = -1; } @@ -3283,6 +3420,7 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, const char *op_name; unsigned long zo; int ret; + BlockZoneWps *wps = bs->wps; int64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS; zone_size = bs->bl.zone_size; @@ -3300,6 +3438,15 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, return -EINVAL; } + QEMU_LOCK_GUARD(&wps->colock); + uint32_t i = offset / bs->bl.zone_size; + uint32_t nrz = len / bs->bl.zone_size; + uint64_t *wp = &wps->wp[i]; + if (BDRV_ZT_IS_CONV(*wp) && len != capacity) { + error_report("zone mgmt operations are not allowed for conventional zones"); + return -EIO; + } + switch (op) { case BLK_ZO_OPEN: op_name = "BLKOPENZONE"; @@ -3337,8 +3484,28 @@ static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op, len >> BDRV_SECTOR_BITS); ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb); if (ret != 0) { + update_zones_wp(bs, s->fd, offset, i); ret = -errno; error_report("ioctl %s failed %d", op_name, ret); + return ret; + } + + if (zo == BLKRESETZONE && len == capacity) { + ret = get_zones_wp(bs, s->fd, 0, bs->bl.nr_zones, 1); + if (ret < 0) { + error_report("reporting single wp failed"); + return ret; + } + } else if (zo == BLKRESETZONE) { + for (int j = 0; j < nrz; ++j) { + wp[j] = offset + j * zone_size; + } + } else if (zo == BLKFINISHZONE) { + for (int j = 0; j < nrz; ++j) { + /* The zoned device allows the last zone smaller that the + * zone size. */ + wp[j] = MIN(offset + (j + 1) * zone_size, offset + len); + } } return ret; diff --git a/include/block/block-common.h b/include/block/block-common.h index 1576fcf2ed..93196229ac 100644 --- a/include/block/block-common.h +++ b/include/block/block-common.h @@ -118,6 +118,14 @@ typedef struct BlockZoneDescriptor { BlockZoneState state; } BlockZoneDescriptor; +/* + * Track write pointers of a zone in bytes. + */ +typedef struct BlockZoneWps { + CoMutex colock; + uint64_t wp[]; +} BlockZoneWps; + typedef struct BlockDriverInfo { /* in bytes, 0 if irrelevant */ int cluster_size; @@ -240,6 +248,12 @@ typedef enum { #define BDRV_SECTOR_BITS 9 #define BDRV_SECTOR_SIZE (1ULL << BDRV_SECTOR_BITS) +/* + * Get the first most significant bit of wp. If it is zero, then + * the zone type is SWR. + */ +#define BDRV_ZT_IS_CONV(wp) (wp & (1ULL << 63)) + #define BDRV_REQUEST_MAX_SECTORS MIN_CONST(SIZE_MAX >> BDRV_SECTOR_BITS, \ INT_MAX >> BDRV_SECTOR_BITS) #define BDRV_REQUEST_MAX_BYTES (BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h index 1bd2aef4d5..b34a7f175d 100644 --- a/include/block/block_int-common.h +++ b/include/block/block_int-common.h @@ -884,6 +884,8 @@ typedef struct BlockLimits { /* maximum number of active zones */ int64_t max_active_zones; + + int64_t write_granularity; } BlockLimits; typedef struct BdrvOpBlocker BdrvOpBlocker; @@ -1245,6 +1247,9 @@ struct BlockDriverState { CoMutex bsc_modify_lock; /* Always non-NULL, but must only be dereferenced under an RCU read guard */ BdrvBlockStatusCache *block_status_cache; + + /* array of write pointers' location of each zone in the zoned device. */ + BlockZoneWps *wps; }; struct BlockBackendRootState {
Since Linux doesn't have a user API to issue zone append operations to zoned devices from user space, the file-posix driver is modified to add zone append emulation using regular writes. To do this, the file-posix driver tracks the wp location of all zones of the device. It uses an array of uint64_t. The most significant bit of each wp location indicates if the zone type is conventional zones. The zones wp can be changed due to the following operations issued: - zone reset: change the wp to the start offset of that zone - zone finish: change to the end location of that zone - write to a zone - zone append Signed-off-by: Sam Li <faithilikerun@gmail.com> --- block/file-posix.c | 173 ++++++++++++++++++++++++++++++- include/block/block-common.h | 14 +++ include/block/block_int-common.h | 5 + 3 files changed, 189 insertions(+), 3 deletions(-)