diff mbox series

[2/2] rpmsg: glink: Consolidate TX_DATA and TX_DATA_CONT

Message ID 20230327144153.3133425-3-quic_bjorande@quicinc.com (mailing list archive)
State Superseded
Headers show
Series rpmsg: glink: Fix + cleanup in __qcom_glink_send() | expand

Commit Message

Bjorn Andersson March 27, 2023, 2:41 p.m. UTC
Rather than duplicating most of the code for constructing the initial
TX_DATA and subsequent TX_DATA_CONT packets, roll them into a single
loop.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 drivers/rpmsg/qcom_glink_native.c | 46 +++++++++----------------------
 1 file changed, 13 insertions(+), 33 deletions(-)

Comments

Chris Lew April 7, 2023, 10:10 p.m. UTC | #1
On 3/27/2023 7:41 AM, Bjorn Andersson wrote:
> Rather than duplicating most of the code for constructing the initial
> TX_DATA and subsequent TX_DATA_CONT packets, roll them into a single
> loop.
> 
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>   drivers/rpmsg/qcom_glink_native.c | 46 +++++++++----------------------
>   1 file changed, 13 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 62634d020d13..082cf7f4888e 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -1309,7 +1309,7 @@ static int __qcom_glink_send(struct glink_channel *channel,
>   	int ret;
>   	unsigned long flags;
>   	int chunk_size = len;
> -	int left_size = 0;
> +	size_t offset = 0;
>   
>   	if (!glink->intentless) {
>   		while (!intent) {
> @@ -1343,49 +1343,29 @@ static int __qcom_glink_send(struct glink_channel *channel,
>   		iid = intent->id;
>   	}
>   
> -	if (wait && chunk_size > SZ_8K) {
> -		chunk_size = SZ_8K;
> -		left_size = len - chunk_size;
> -	}
> -	req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA);
> -	req.msg.param1 = cpu_to_le16(channel->lcid);
> -	req.msg.param2 = cpu_to_le32(iid);
> -	req.chunk_size = cpu_to_le32(chunk_size);
> -	req.left_size = cpu_to_le32(left_size);
> -
> -	ret = qcom_glink_tx(glink, &req, sizeof(req), data, chunk_size, wait);
> -
> -	/* Mark intent available if we failed */
> -	if (ret) {
> -		if (intent)
> -			intent->in_use = false;
> -		return ret;
> -	}
> -
> -	while (left_size > 0) {
> -		data = (void *)((char *)data + chunk_size);
> -		chunk_size = left_size;
> -		if (chunk_size > SZ_8K)
> +	while (offset < len) {
> +		chunk_size = len - offset;
> +		if (chunk_size > SZ_8K && (wait || offset > 0))

offset > 0 seems to be a new condition compared to the previous logic.
Are we adding this as a cached check because we know if offset is set 
then fragmented sends are allowed?

I don't think wait would have changed during the loop, so I'm not sure 
if offset > 0 is adding any extra value to the check.

>   			chunk_size = SZ_8K;
> -		left_size -= chunk_size;
>   
> -		req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA_CONT);
> +		req.msg.cmd = cpu_to_le16(offset == 0 ? GLINK_CMD_TX_DATA : GLINK_CMD_TX_DATA_CONT);
>   		req.msg.param1 = cpu_to_le16(channel->lcid);
>   		req.msg.param2 = cpu_to_le32(iid);
>   		req.chunk_size = cpu_to_le32(chunk_size);
> -		req.left_size = cpu_to_le32(left_size);
> +		req.left_size = cpu_to_le32(len - offset - chunk_size);
>   
> -		ret = qcom_glink_tx(glink, &req, sizeof(req), data,
> -				    chunk_size, wait);
> -
> -		/* Mark intent available if we failed */
> +		ret = qcom_glink_tx(glink, &req, sizeof(req), data + offset, chunk_size, wait);
>   		if (ret) {
> +			/* Mark intent available if we failed */
>   			if (intent)
>   				intent->in_use = false;
> -			break;
> +			return ret;
>   		}
> +
> +		offset += chunk_size;
>   	}
> -	return ret;
> +
> +	return 0;
>   }
>   
>   static int qcom_glink_send(struct rpmsg_endpoint *ept, void *data, int len)
Bjorn Andersson April 12, 2023, 4:50 p.m. UTC | #2
On Fri, Apr 07, 2023 at 03:10:45PM -0700, Chris Lew wrote:
> 
> 
> On 3/27/2023 7:41 AM, Bjorn Andersson wrote:
> > Rather than duplicating most of the code for constructing the initial
> > TX_DATA and subsequent TX_DATA_CONT packets, roll them into a single
> > loop.
> > 
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> >   drivers/rpmsg/qcom_glink_native.c | 46 +++++++++----------------------
> >   1 file changed, 13 insertions(+), 33 deletions(-)
> > 
> > diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> > index 62634d020d13..082cf7f4888e 100644
> > --- a/drivers/rpmsg/qcom_glink_native.c
> > +++ b/drivers/rpmsg/qcom_glink_native.c
> > @@ -1309,7 +1309,7 @@ static int __qcom_glink_send(struct glink_channel *channel,
> >   	int ret;
> >   	unsigned long flags;
> >   	int chunk_size = len;
> > -	int left_size = 0;
> > +	size_t offset = 0;
> >   	if (!glink->intentless) {
> >   		while (!intent) {
> > @@ -1343,49 +1343,29 @@ static int __qcom_glink_send(struct glink_channel *channel,
> >   		iid = intent->id;
> >   	}
> > -	if (wait && chunk_size > SZ_8K) {
> > -		chunk_size = SZ_8K;
> > -		left_size = len - chunk_size;
> > -	}
> > -	req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA);
> > -	req.msg.param1 = cpu_to_le16(channel->lcid);
> > -	req.msg.param2 = cpu_to_le32(iid);
> > -	req.chunk_size = cpu_to_le32(chunk_size);
> > -	req.left_size = cpu_to_le32(left_size);
> > -
> > -	ret = qcom_glink_tx(glink, &req, sizeof(req), data, chunk_size, wait);
> > -
> > -	/* Mark intent available if we failed */
> > -	if (ret) {
> > -		if (intent)
> > -			intent->in_use = false;
> > -		return ret;
> > -	}
> > -
> > -	while (left_size > 0) {
> > -		data = (void *)((char *)data + chunk_size);
> > -		chunk_size = left_size;
> > -		if (chunk_size > SZ_8K)
> > +	while (offset < len) {
> > +		chunk_size = len - offset;
> > +		if (chunk_size > SZ_8K && (wait || offset > 0))
> 
> offset > 0 seems to be a new condition compared to the previous logic.
> Are we adding this as a cached check because we know if offset is set then
> fragmented sends are allowed?
> 

You're right, I believe my intention was to retain the two inquiries of
the original code; for the first block, don't split it if we're not
waiting and for any subsequent blocks always split.

> I don't think wait would have changed during the loop, so I'm not sure if
> offset > 0 is adding any extra value to the check.
> 

But you're totally right, offset > 0 would only occur if wait is set and
wait will not have changed for subsequent blocks.

So while capturing the original conditions, it seems superfluous.

Thanks,
Bjorn

> >   			chunk_size = SZ_8K;
> > -		left_size -= chunk_size;
> > -		req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA_CONT);
> > +		req.msg.cmd = cpu_to_le16(offset == 0 ? GLINK_CMD_TX_DATA : GLINK_CMD_TX_DATA_CONT);
> >   		req.msg.param1 = cpu_to_le16(channel->lcid);
> >   		req.msg.param2 = cpu_to_le32(iid);
> >   		req.chunk_size = cpu_to_le32(chunk_size);
> > -		req.left_size = cpu_to_le32(left_size);
> > +		req.left_size = cpu_to_le32(len - offset - chunk_size);
> > -		ret = qcom_glink_tx(glink, &req, sizeof(req), data,
> > -				    chunk_size, wait);
> > -
> > -		/* Mark intent available if we failed */
> > +		ret = qcom_glink_tx(glink, &req, sizeof(req), data + offset, chunk_size, wait);
> >   		if (ret) {
> > +			/* Mark intent available if we failed */
> >   			if (intent)
> >   				intent->in_use = false;
> > -			break;
> > +			return ret;
> >   		}
> > +
> > +		offset += chunk_size;
> >   	}
> > -	return ret;
> > +
> > +	return 0;
> >   }
> >   static int qcom_glink_send(struct rpmsg_endpoint *ept, void *data, int len)
diff mbox series

Patch

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 62634d020d13..082cf7f4888e 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1309,7 +1309,7 @@  static int __qcom_glink_send(struct glink_channel *channel,
 	int ret;
 	unsigned long flags;
 	int chunk_size = len;
-	int left_size = 0;
+	size_t offset = 0;
 
 	if (!glink->intentless) {
 		while (!intent) {
@@ -1343,49 +1343,29 @@  static int __qcom_glink_send(struct glink_channel *channel,
 		iid = intent->id;
 	}
 
-	if (wait && chunk_size > SZ_8K) {
-		chunk_size = SZ_8K;
-		left_size = len - chunk_size;
-	}
-	req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA);
-	req.msg.param1 = cpu_to_le16(channel->lcid);
-	req.msg.param2 = cpu_to_le32(iid);
-	req.chunk_size = cpu_to_le32(chunk_size);
-	req.left_size = cpu_to_le32(left_size);
-
-	ret = qcom_glink_tx(glink, &req, sizeof(req), data, chunk_size, wait);
-
-	/* Mark intent available if we failed */
-	if (ret) {
-		if (intent)
-			intent->in_use = false;
-		return ret;
-	}
-
-	while (left_size > 0) {
-		data = (void *)((char *)data + chunk_size);
-		chunk_size = left_size;
-		if (chunk_size > SZ_8K)
+	while (offset < len) {
+		chunk_size = len - offset;
+		if (chunk_size > SZ_8K && (wait || offset > 0))
 			chunk_size = SZ_8K;
-		left_size -= chunk_size;
 
-		req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA_CONT);
+		req.msg.cmd = cpu_to_le16(offset == 0 ? GLINK_CMD_TX_DATA : GLINK_CMD_TX_DATA_CONT);
 		req.msg.param1 = cpu_to_le16(channel->lcid);
 		req.msg.param2 = cpu_to_le32(iid);
 		req.chunk_size = cpu_to_le32(chunk_size);
-		req.left_size = cpu_to_le32(left_size);
+		req.left_size = cpu_to_le32(len - offset - chunk_size);
 
-		ret = qcom_glink_tx(glink, &req, sizeof(req), data,
-				    chunk_size, wait);
-
-		/* Mark intent available if we failed */
+		ret = qcom_glink_tx(glink, &req, sizeof(req), data + offset, chunk_size, wait);
 		if (ret) {
+			/* Mark intent available if we failed */
 			if (intent)
 				intent->in_use = false;
-			break;
+			return ret;
 		}
+
+		offset += chunk_size;
 	}
-	return ret;
+
+	return 0;
 }
 
 static int qcom_glink_send(struct rpmsg_endpoint *ept, void *data, int len)