[for-next,2/3] RDMA/rtrs: Fix rxe_dealloc_pd warning

Message ID	1681108984-2-3-git-send-email-lizhijian@fujitsu.com (mailing list archive)
State	Changes Requested
Headers	show Return-Path: <linux-rdma-owner@vger.kernel.org> From: Li Zhijian <lizhijian@fujitsu.com> To: <haris.iqbal@ionos.com>, <jinpu.wang@ionos.com>, <jgg@ziepe.ca>, <leon@kernel.org>, <linux-rdma@vger.kernel.org> CC: <guoqing.jiang@linux.dev>, <linux-kernel@vger.kernel.org>, Li Zhijian <lizhijian@fujitsu.com> Subject: [PATCH for-next 2/3] RDMA/rtrs: Fix rxe_dealloc_pd warning Date: Mon, 10 Apr 2023 06:43:03 +0000 Message-ID: <1681108984-2-3-git-send-email-lizhijian@fujitsu.com> In-Reply-To: <1681108984-2-1-git-send-email-lizhijian@fujitsu.com> References: <1681108984-2-1-git-send-email-lizhijian@fujitsu.com> MIME-Version: 1.0 Content-Type: text/plain Precedence: bulk
Series	rtrs bugfix and cleanups \| expand [for-next,0/3] rtrs bugfix and cleanups [for-next,1/3] RDMA/rtrs: Remove duplicate cq_num assignment [for-next,2/3] RDMA/rtrs: Fix rxe_dealloc_pd warning [for-next,3/3] RDMA/rtrs: Avoid use-after-free in rtrs_clt_rdma_cm_handler

Li Zhijian April 10, 2023, 6:43 a.m. UTC

The warning occurs when destroying PD whose reference count is not zero.

Precodition: clt_path->s.con_num is 2.
So 2 cm connection will be created as below:
CPU0                                              CPU1
init_conns {                              |
  create_cm() // a. con[0] created        |
                                          |  a'. rtrs_clt_rdma_cm_handler() {
                                          |    rtrs_rdma_addr_resolved()
                                          |      create_con_cq_qp(con); << con[0]
                                          |  }
                                          | in this moment, refcnt of PD was increased to 2+
                                          |
  create_cm() // b. cid = 1, failed       |
    destroy_con_cq_qp()                   |
      rtrs_ib_dev_put()                   |
        dev_free()                        |
          ib_dealloc_pd(dev->ib_pd) << PD |
           is destroyed, but refcnt is    |
           still greater than 0           |
}

Simply, Here we can avoid this warning by introducing conn own flag to
track if its cleanup should drop the PD.

-----------------------------------------------
 rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
 Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
 CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
 RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
 Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
 RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
 RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
 R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
 R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
 FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
  ib_dealloc_pd_user+0x4b/0x80 [ib_core]
  rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
  destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
  init_path+0x1e7/0x9a0 [rtrs_client]
  ? __pfx_autoremove_wake_function+0x10/0x10
  ? lock_is_held_type+0xd7/0x130
  ? rcu_read_lock_sched_held+0x43/0x80
  ? pcpu_alloc+0x3dd/0x7d0
  ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
  rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
  ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
  rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
---
 drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
 drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
 2 files changed, 5 insertions(+)

Leon Romanovsky April 10, 2023, 12:08 p.m. UTC | #1

On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> The warning occurs when destroying PD whose reference count is not zero.
> 
> Precodition: clt_path->s.con_num is 2.
> So 2 cm connection will be created as below:
> CPU0                                              CPU1
> init_conns {                              |
>   create_cm() // a. con[0] created        |
>                                           |  a'. rtrs_clt_rdma_cm_handler() {
>                                           |    rtrs_rdma_addr_resolved()
>                                           |      create_con_cq_qp(con); << con[0]
>                                           |  }
>                                           | in this moment, refcnt of PD was increased to 2+
>                                           |
>   create_cm() // b. cid = 1, failed       |
>     destroy_con_cq_qp()                   |
>       rtrs_ib_dev_put()                   |
>         dev_free()                        |
>           ib_dealloc_pd(dev->ib_pd) << PD |
>            is destroyed, but refcnt is    |
>            still greater than 0           |
> }
> 
> Simply, Here we can avoid this warning by introducing conn own flag to
> track if its cleanup should drop the PD.
> 
> -----------------------------------------------
>  rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>  ------------[ cut here ]------------
>  WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>  Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>  CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>  RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>  Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>  RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>  RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>  RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>  RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>  R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>  R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>  FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>  CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>  Call Trace:
>   <TASK>
>   rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>   ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>   rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>   destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>   init_path+0x1e7/0x9a0 [rtrs_client]
>   ? __pfx_autoremove_wake_function+0x10/0x10
>   ? lock_is_held_type+0xd7/0x130
>   ? rcu_read_lock_sched_held+0x43/0x80
>   ? pcpu_alloc+0x3dd/0x7d0
>   ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>   rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>   ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>   rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
> 
> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> ---
>  drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>  drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> index c2065fc33a56..4c8f42e46e2f 100644
> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>  			return -ENOMEM;
>  		}
>  		clt_path->s.dev_ref = 1;
> +		con->has_dev = true;
>  		query_fast_reg_mode(clt_path);
>  		wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>  		/*
> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>  		wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>  		/* Shared between connections */
>  		clt_path->s.dev_ref++;

Without looking in the code, I would expect dev_ref from the line above
to perform PD protection.

> +		con->has_dev = true;
>  		max_send_wr = min_t(int, wr_limit,
>  			      /* QD * (REQ + RSP + FR REGS or INVS) + drain */
>  			      clt_path->queue_depth * 3 + 1);
> @@ -1742,6 +1744,8 @@ static void destroy_con_cq_qp(struct rtrs_clt_con *con)
>  		con->rsp_ius = NULL;
>  		con->queue_num = 0;
>  	}
> +	if (!con->has_dev)
> +		return;
>  	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>  		rtrs_ib_dev_put(clt_path->s.dev);
>  		clt_path->s.dev = NULL;
> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.h b/drivers/infiniband/ulp/rtrs/rtrs-clt.h
> index f848c0392d98..970b75633594 100644
> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.h
> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.h
> @@ -75,6 +75,7 @@ struct rtrs_clt_con {
>  	unsigned int		cpu;
>  	struct mutex		con_mutex;
>  	int			cm_err;
> +	bool			has_dev;
>  };
>  
>  /**
> -- 
> 2.29.2
>

Guoqing Jiang April 10, 2023, 1:10 p.m. UTC | #2

On 4/10/23 20:08, Leon Romanovsky wrote:
> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>> The warning occurs when destroying PD whose reference count is not zero.
>>
>> Precodition: clt_path->s.con_num is 2.
>> So 2 cm connection will be created as below:
>> CPU0                                              CPU1
>> init_conns {                              |
>>    create_cm() // a. con[0] created        |
>>                                            |  a'. rtrs_clt_rdma_cm_handler() {
>>                                            |    rtrs_rdma_addr_resolved()
>>                                            |      create_con_cq_qp(con); << con[0]
>>                                            |  }
>>                                            | in this moment, refcnt of PD was increased to 2+
>>                                            |
>>    create_cm() // b. cid = 1, failed       |
>>      destroy_con_cq_qp()                   |
>>        rtrs_ib_dev_put()                   |
>>          dev_free()                        |
>>            ib_dealloc_pd(dev->ib_pd) << PD |
>>             is destroyed, but refcnt is    |
>>             still greater than 0           |
>> }
>>
>> Simply, Here we can avoid this warning by introducing conn own flag to
>> track if its cleanup should drop the PD.
>>
>> -----------------------------------------------
>>   rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>>   ------------[ cut here ]------------
>>   WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>   Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>>   CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>>   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>>   RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>   Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>>   RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>>   RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>>   RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>>   RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>>   R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>>   R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>>   FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>>   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>   CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>>   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>   Call Trace:
>>    <TASK>
>>    rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>>    ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>>    rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>>    destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>>    init_path+0x1e7/0x9a0 [rtrs_client]
>>    ? __pfx_autoremove_wake_function+0x10/0x10
>>    ? lock_is_held_type+0xd7/0x130
>>    ? rcu_read_lock_sched_held+0x43/0x80
>>    ? pcpu_alloc+0x3dd/0x7d0
>>    ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>>    rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>>    ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>>    rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
>>
>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>> ---
>>   drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>>   drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>>   2 files changed, 5 insertions(+)
>>
>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> index c2065fc33a56..4c8f42e46e2f 100644
>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>   			return -ENOMEM;
>>   		}
>>   		clt_path->s.dev_ref = 1;
>> +		con->has_dev = true;
>>   		query_fast_reg_mode(clt_path);
>>   		wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>   		/*
>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>   		wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>   		/* Shared between connections */
>>   		clt_path->s.dev_ref++;
> Without looking in the code, I would expect dev_ref from the line above
> to perform PD protection.

Agreed.

Thanks,
Guoqing

Li Zhijian April 11, 2023, 2:43 a.m. UTC | #3

On 10/04/2023 21:10, Guoqing Jiang wrote:
> 
> 
> On 4/10/23 20:08, Leon Romanovsky wrote:
>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>> The warning occurs when destroying PD whose reference count is not zero.
>>>
>>> Precodition: clt_path->s.con_num is 2.
>>> So 2 cm connection will be created as below:
>>> CPU0                                              CPU1
>>> init_conns {                              |
>>>    create_cm() // a. con[0] created        |
>>>                                            |  a'. rtrs_clt_rdma_cm_handler() {
>>>                                            |    rtrs_rdma_addr_resolved()
>>>                                            |      create_con_cq_qp(con); << con[0]
>>>                                            |  }
>>>                                            | in this moment, refcnt of PD was increased to 2+
>>>                                            |
>>>    create_cm() // b. cid = 1, failed       |
>>>      destroy_con_cq_qp()                   |
>>>        rtrs_ib_dev_put()                   |
>>>          dev_free()                        |
>>>            ib_dealloc_pd(dev->ib_pd) << PD |
>>>             is destroyed, but refcnt is    |
>>>             still greater than 0           |
>>> }
>>>
>>> Simply, Here we can avoid this warning by introducing conn own flag to
>>> track if its cleanup should drop the PD.
>>>
>>> -----------------------------------------------
>>>   rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>>>   ------------[ cut here ]------------
>>>   WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>   Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
>>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>>>   CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>>>   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>>>   RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>   Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>>>   RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>>>   RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>>>   RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>>>   RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>>>   R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>>>   R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>>>   FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>>>   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>   CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>>>   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>   Call Trace:
>>>    <TASK>
>>>    rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>>>    ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>>>    rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>>>    destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>>>    init_path+0x1e7/0x9a0 [rtrs_client]
>>>    ? __pfx_autoremove_wake_function+0x10/0x10
>>>    ? lock_is_held_type+0xd7/0x130
>>>    ? rcu_read_lock_sched_held+0x43/0x80
>>>    ? pcpu_alloc+0x3dd/0x7d0
>>>    ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>>>    rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>>>    ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>>>    rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
>>>
>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>> ---
>>>   drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>>>   drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>>>   2 files changed, 5 insertions(+)
>>>
>>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>> index c2065fc33a56..4c8f42e46e2f 100644
>>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>               return -ENOMEM;
>>>           }
>>>           clt_path->s.dev_ref = 1;
>>> +        con->has_dev = true;
>>>           query_fast_reg_mode(clt_path);
>>>           wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>           /*
>>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>           wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>           /* Shared between connections */
>>>           clt_path->s.dev_ref++;
>> Without looking in the code, I would expect dev_ref from the line above
>> to perform PD protection.
> 
> Agreed.

Sorry, i didn't get your point. Do you mean something like this:

+		con->has_dev = true;
  		clt_path->s.dev_ref++;



Thanks
Zhijian

> 
> Thanks,
> Guoqing

Leon Romanovsky April 11, 2023, 12:26 p.m. UTC | #4

On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
> 
> 
> On 10/04/2023 21:10, Guoqing Jiang wrote:
> > 
> > 
> > On 4/10/23 20:08, Leon Romanovsky wrote:
> >> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> >>> The warning occurs when destroying PD whose reference count is not zero.
> >>>
> >>> Precodition: clt_path->s.con_num is 2.
> >>> So 2 cm connection will be created as below:
> >>> CPU0                                              CPU1
> >>> init_conns {                              |
> >>>    create_cm() // a. con[0] created        |
> >>>                                            |  a'. rtrs_clt_rdma_cm_handler() {
> >>>                                            |    rtrs_rdma_addr_resolved()
> >>>                                            |      create_con_cq_qp(con); << con[0]
> >>>                                            |  }
> >>>                                            | in this moment, refcnt of PD was increased to 2+
> >>>                                            |
> >>>    create_cm() // b. cid = 1, failed       |
> >>>      destroy_con_cq_qp()                   |
> >>>        rtrs_ib_dev_put()                   |
> >>>          dev_free()                        |
> >>>            ib_dealloc_pd(dev->ib_pd) << PD |
> >>>             is destroyed, but refcnt is    |
> >>>             still greater than 0           |
> >>> }
> >>>
> >>> Simply, Here we can avoid this warning by introducing conn own flag to
> >>> track if its cleanup should drop the PD.
> >>>
> >>> -----------------------------------------------
> >>>   rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
> >>>   ------------[ cut here ]------------
> >>>   WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
> >>>   Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
> >>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
> >>>   CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
> >>>   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> >>>   RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
> >>>   Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
> >>>   RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
> >>>   RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
> >>>   RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
> >>>   RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
> >>>   R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
> >>>   R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
> >>>   FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
> >>>   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>>   CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
> >>>   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> >>>   DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >>>   Call Trace:
> >>>    <TASK>
> >>>    rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
> >>>    ib_dealloc_pd_user+0x4b/0x80 [ib_core]
> >>>    rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
> >>>    destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
> >>>    init_path+0x1e7/0x9a0 [rtrs_client]
> >>>    ? __pfx_autoremove_wake_function+0x10/0x10
> >>>    ? lock_is_held_type+0xd7/0x130
> >>>    ? rcu_read_lock_sched_held+0x43/0x80
> >>>    ? pcpu_alloc+0x3dd/0x7d0
> >>>    ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
> >>>    rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
> >>>    ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
> >>>    rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
> >>>
> >>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> >>> ---
> >>>   drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
> >>>   drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
> >>>   2 files changed, 5 insertions(+)
> >>>
> >>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> >>> index c2065fc33a56..4c8f42e46e2f 100644
> >>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> >>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> >>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
> >>>               return -ENOMEM;
> >>>           }
> >>>           clt_path->s.dev_ref = 1;
> >>> +        con->has_dev = true;
> >>>           query_fast_reg_mode(clt_path);
> >>>           wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
> >>>           /*
> >>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
> >>>           wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
> >>>           /* Shared between connections */
> >>>           clt_path->s.dev_ref++;
> >> Without looking in the code, I would expect dev_ref from the line above
> >> to perform PD protection.
> > 
> > Agreed.
> 
> Sorry, i didn't get your point. Do you mean something like this:
> 
> +		con->has_dev = true;
>   		clt_path->s.dev_ref++;

No, my point was that clt_path->s.dev_ref > 0 means that has_dev is
equal to true, and dev_ref is supposed to protect from early PD
destruction.

Thanks

> 
> 
> 
> Thanks
> Zhijian
> 
> > 
> > Thanks,
> > Guoqing

Li Zhijian April 12, 2023, 1:15 a.m. UTC | #5

On 11/04/2023 20:26, Leon Romanovsky wrote:
> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>
>>
>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>
>>>
>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>
>>>>> Precodition: clt_path->s.con_num is 2.
>>>>> So 2 cm connection will be created as below:
>>>>> CPU0                                              CPU1
>>>>> init_conns {                              |
>>>>>     create_cm() // a. con[0] created        |
>>>>>                                             |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>                                             |    rtrs_rdma_addr_resolved()
>>>>>                                             |      create_con_cq_qp(con); << con[0]
>>>>>                                             |  }
>>>>>                                             | in this moment, refcnt of PD was increased to 2+
>>>>>                                             |
>>>>>     create_cm() // b. cid = 1, failed       |
>>>>>       destroy_con_cq_qp()                   |
>>>>>         rtrs_ib_dev_put()                   |
>>>>>           dev_free()                        |
>>>>>             ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>              is destroyed, but refcnt is    |
>>>>>              still greater than 0           |
>>>>> }
>>>>>
>>>>> Simply, Here we can avoid this warning by introducing conn own flag to
>>>>> track if its cleanup should drop the PD.
>>>>>
>>>>> -----------------------------------------------
>>>>>    rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>>>>>    ------------[ cut here ]------------
>>>>>    WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>    Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
>>>>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>>>>>    CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>>>>>    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>>>>>    RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>    Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>>>>>    RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>>>>>    RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>>>>>    RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>>>>>    RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>>>>>    R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>>>>>    R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>>>>>    FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>>>>>    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>    CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>>>>>    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>>    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>>    Call Trace:
>>>>>     <TASK>
>>>>>     rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>>>>>     ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>>>>>     rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>>>>>     destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>>>>>     init_path+0x1e7/0x9a0 [rtrs_client]
>>>>>     ? __pfx_autoremove_wake_function+0x10/0x10
>>>>>     ? lock_is_held_type+0xd7/0x130
>>>>>     ? rcu_read_lock_sched_held+0x43/0x80
>>>>>     ? pcpu_alloc+0x3dd/0x7d0
>>>>>     ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>>>>>     rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>>>>>     ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>>>>>     rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
>>>>>
>>>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>>>> ---
>>>>>    drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>>>>>    drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>>>>>    2 files changed, 5 insertions(+)
>>>>>
>>>>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>> index c2065fc33a56..4c8f42e46e2f 100644
>>>>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>                return -ENOMEM;
>>>>>            }
>>>>>            clt_path->s.dev_ref = 1;
>>>>> +        con->has_dev = true;
>>>>>            query_fast_reg_mode(clt_path);
>>>>>            wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>            /*
>>>>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>            wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>            /* Shared between connections */
>>>>>            clt_path->s.dev_ref++;
>>>> Without looking in the code, I would expect dev_ref from the line above
>>>> to perform PD protection.
>>>
>>> Agreed.
>>
>> Sorry, i didn't get your point. Do you mean something like this:
>>
>> +		con->has_dev = true;
>>    		clt_path->s.dev_ref++;
> 
> No, my point was that clt_path->s.dev_ref > 0 means that has_dev is
> equal to true, and dev_ref is supposed to protect from early PD
> destruction.
> 


> +       if (!con->has_dev)
> +               return;

We have already done such protection VVVV

>         if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {  <<< each cleanup will decrease clt_path->s.dev_ref
>                 rtrs_ib_dev_put(clt_path->s.dev);             <<< when it becomes to 0, PD will be destructed.
>                 clt_path->s.dev = NULL;


But they are not equal, clt_path->s.dev_ref could be shared by multiple connections.
So in the case con[0] successed and con[1] failed(clt_path->s.dev_ref is 1),
the con[1]'s cleanup path(destroy_con_cq_qp) will destroy PD while conn[0] still associates this PD.


Thanks
Zhijian

> Thanks
> 
>>
>>
>>
>> Thanks
>> Zhijian
>>
>>>
>>> Thanks,
>>> Guoqing

Guoqing Jiang April 13, 2023, 7:35 a.m. UTC | #6

Hi,

I take a closer look today.

On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>
> On 11/04/2023 20:26, Leon Romanovsky wrote:
>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>
>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>
>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>
>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>> So 2 cm connection will be created as below:
>>>>>> CPU0                                              CPU1
>>>>>> init_conns {                              |
>>>>>>      create_cm() // a. con[0] created        |
>>>>>>                                              |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>                                              |    rtrs_rdma_addr_resolved()
>>>>>>                                              |      create_con_cq_qp(con); << con[0]
>>>>>>                                              |  }
>>>>>>                                              | in this moment, refcnt of PD was increased to 2+

What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.

>>>>>>                                              |
>>>>>>      create_cm() // b. cid = 1, failed       |
>>>>>>        destroy_con_cq_qp()                   |
>>>>>>          rtrs_ib_dev_put()                   |
>>>>>>            dev_free()                        |
>>>>>>              ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>               is destroyed, but refcnt is    |
>>>>>>               still greater than 0           |

Assuming you mean "pd->usecnt". We only allocate pd in con[0] by 
rtrs_ib_dev_find_or_add,
if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> 
atomic_inc(&pd->usecnt)
can't be triggered. Is there other places could increase the refcnt?

>>>>>> }
>>>>>>
>>>>>> Simply, Here we can avoid this warning by introducing conn own flag to
>>>>>> track if its cleanup should drop the PD.
>>>>>>
>>>>>> -----------------------------------------------
>>>>>>     rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>>>>>>     ------------[ cut here ]------------
>>>>>>     WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>>     Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
>>>>>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>>>>>>     CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>>>>>>     Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>>>>>>     RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>>     Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>>>>>>     RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>>>>>>     RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>>>>>>     RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>>>>>>     RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>>>>>>     R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>>>>>>     R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>>>>>>     FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>>>>>>     CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>     CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>>>>>>     DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>>>     DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>>>     Call Trace:
>>>>>>      <TASK>
>>>>>>      rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>>>>>>      ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>>>>>>      rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>>>>>>      destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>>>>>>      init_path+0x1e7/0x9a0 [rtrs_client]
>>>>>>      ? __pfx_autoremove_wake_function+0x10/0x10
>>>>>>      ? lock_is_held_type+0xd7/0x130
>>>>>>      ? rcu_read_lock_sched_held+0x43/0x80
>>>>>>      ? pcpu_alloc+0x3dd/0x7d0
>>>>>>      ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>>>>>>      rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>>>>>>      ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>>>>>>      rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
>>>>>>
>>>>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>>>>> ---
>>>>>>     drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>>>>>>     drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>>>>>>     2 files changed, 5 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>> index c2065fc33a56..4c8f42e46e2f 100644
>>>>>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>>                 return -ENOMEM;
>>>>>>             }
>>>>>>             clt_path->s.dev_ref = 1;
>>>>>> +        con->has_dev = true;
>>>>>>             query_fast_reg_mode(clt_path);
>>>>>>             wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>>             /*
>>>>>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>>             wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>>             /* Shared between connections */
>>>>>>             clt_path->s.dev_ref++;
>>>>> Without looking in the code, I would expect dev_ref from the line above
>>>>> to perform PD protection.
>>>> Agreed.
>>> Sorry, i didn't get your point. Do you mean something like this:
>>>
>>> +		con->has_dev = true;
>>>     		clt_path->s.dev_ref++;
>> No, my point was that clt_path->s.dev_ref > 0 means that has_dev is
>> equal to true, and dev_ref is supposed to protect from early PD
>> destruction.
>>
>
>> +       if (!con->has_dev)
>> +               return;
> We have already done such protection VVVV
>
>>          if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {  <<< each cleanup will decrease clt_path->s.dev_ref
>>                  rtrs_ib_dev_put(clt_path->s.dev);             <<< when it becomes to 0, PD will be destructed.
>>                  clt_path->s.dev = NULL;
>
> But they are not equal, clt_path->s.dev_ref could be shared by multiple connections.
> So in the case con[0] successed and con[1] failed(clt_path->s.dev_ref is 1),
> the con[1]'s cleanup path(destroy_con_cq_qp) will destroy PD while conn[0] still associates this PD.

Then what is the appropriate time to call destroy_con_cq_qp for this 
scenario?
Otherwise there could be memory leak.

Thanks,
Guoqing

Li Zhijian April 13, 2023, 8:12 a.m. UTC | #7

On 13/04/2023 15:35, Guoqing Jiang wrote:
> Hi,
> 
> I take a closer look today.
> 
> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>
>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>
>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>
>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>
>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>> So 2 cm connection will be created as below:
>>>>>>> CPU0                                              CPU1
>>>>>>> init_conns {                              |
>>>>>>>      create_cm() // a. con[0] created        |
>>>>>>>                                              |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>                                              |    rtrs_rdma_addr_resolved()
>>>>>>>                                              |      create_con_cq_qp(con); << con[0]
>>>>>>>                                              |  }
>>>>>>>                                              | in this moment, refcnt of PD was increased to 2+
> 
> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.

I mean usecnt in struct ib_pd



> 
>>>>>>>                                              |
>>>>>>>      create_cm() // b. cid = 1, failed       |
>>>>>>>        destroy_con_cq_qp()                   |
>>>>>>>          rtrs_ib_dev_put()                   |
>>>>>>>            dev_free()                        |
>>>>>>>              ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>               is destroyed, but refcnt is    |
>>>>>>>               still greater than 0           |
> 
> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> can't be triggered. Is there other places could increase the refcnt?


Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.

When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
refcnt is still 1.

> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
> Otherwise there could be memory leak.

we must ensure QP in con[0] is closed before destroying the PD.
Currently destroy_con_cq_qp() subroutine will close the opened QP first.


Thanks


> 
>>>>>>> }
>>>>>>>
>>>>>>> Simply, Here we can avoid this warning by introducing conn own flag to
>>>>>>> track if its cleanup should drop the PD.
>>>>>>>
>>>>>>> -----------------------------------------------
>>>>>>>     rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
>>>>>>>     ------------[ cut here ]------------
>>>>>>>     WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>>>     Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_
>>>>>>> vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
>>>>>>>     CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
>>>>>>>     Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
>>>>>>>     RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
>>>>>>>     Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
>>>>>>>     RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
>>>>>>>     RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
>>>>>>>     RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
>>>>>>>     RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
>>>>>>>     R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
>>>>>>>     R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
>>>>>>>     FS:  00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
>>>>>>>     CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>>     CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
>>>>>>>     DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>>>>>     DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>>>>>>>     Call Trace:
>>>>>>>      <TASK>
>>>>>>>      rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
>>>>>>>      ib_dealloc_pd_user+0x4b/0x80 [ib_core]
>>>>>>>      rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
>>>>>>>      destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
>>>>>>>      init_path+0x1e7/0x9a0 [rtrs_client]
>>>>>>>      ? __pfx_autoremove_wake_function+0x10/0x10
>>>>>>>      ? lock_is_held_type+0xd7/0x130
>>>>>>>      ? rcu_read_lock_sched_held+0x43/0x80
>>>>>>>      ? pcpu_alloc+0x3dd/0x7d0
>>>>>>>      ? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
>>>>>>>      rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
>>>>>>>      ? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
>>>>>>>      rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
>>>>>>>
>>>>>>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
>>>>>>> ---
>>>>>>>     drivers/infiniband/ulp/rtrs/rtrs-clt.c | 4 ++++
>>>>>>>     drivers/infiniband/ulp/rtrs/rtrs-clt.h | 1 +
>>>>>>>     2 files changed, 5 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>>> index c2065fc33a56..4c8f42e46e2f 100644
>>>>>>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>>>>>>> @@ -1664,6 +1664,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>>>                 return -ENOMEM;
>>>>>>>             }
>>>>>>>             clt_path->s.dev_ref = 1;
>>>>>>> +        con->has_dev = true;
>>>>>>>             query_fast_reg_mode(clt_path);
>>>>>>>             wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>>>             /*
>>>>>>> @@ -1690,6 +1691,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
>>>>>>>             wr_limit = clt_path->s.dev->ib_dev->attrs.max_qp_wr;
>>>>>>>             /* Shared between connections */
>>>>>>>             clt_path->s.dev_ref++;
>>>>>> Without looking in the code, I would expect dev_ref from the line above
>>>>>> to perform PD protection.
>>>>> Agreed.
>>>> Sorry, i didn't get your point. Do you mean something like this:
>>>>
>>>> +        con->has_dev = true;
>>>>             clt_path->s.dev_ref++;
>>> No, my point was that clt_path->s.dev_ref > 0 means that has_dev is
>>> equal to true, and dev_ref is supposed to protect from early PD
>>> destruction.
>>>
>>
>>> +       if (!con->has_dev)
>>> +               return;
>> We have already done such protection VVVV
>>
>>>          if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {  <<< each cleanup will decrease clt_path->s.dev_ref
>>>                  rtrs_ib_dev_put(clt_path->s.dev);             <<< when it becomes to 0, PD will be destructed.
>>>                  clt_path->s.dev = NULL;
>>
>> But they are not equal, clt_path->s.dev_ref could be shared by multiple connections.
>> So in the case con[0] successed and con[1] failed(clt_path->s.dev_ref is 1),
>> the con[1]'s cleanup path(destroy_con_cq_qp) will destroy PD while conn[0] still associates this PD.
> 
> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
> Otherwise there could be memory leak.
> 
> Thanks,
> Guoqing

Leon Romanovsky April 13, 2023, 1:24 p.m. UTC | #8

On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
> 
> 
> On 13/04/2023 15:35, Guoqing Jiang wrote:
> > Hi,
> > 
> > I take a closer look today.
> > 
> > On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
> >>
> >> On 11/04/2023 20:26, Leon Romanovsky wrote:
> >>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>>
> >>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
> >>>>>
> >>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
> >>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> >>>>>>> The warning occurs when destroying PD whose reference count is not zero.
> >>>>>>>
> >>>>>>> Precodition: clt_path->s.con_num is 2.
> >>>>>>> So 2 cm connection will be created as below:
> >>>>>>> CPU0                                              CPU1
> >>>>>>> init_conns {                              |
> >>>>>>>      create_cm() // a. con[0] created        |
> >>>>>>>                                              |  a'. rtrs_clt_rdma_cm_handler() {
> >>>>>>>                                              |    rtrs_rdma_addr_resolved()
> >>>>>>>                                              |      create_con_cq_qp(con); << con[0]
> >>>>>>>                                              |  }
> >>>>>>>                                              | in this moment, refcnt of PD was increased to 2+
> > 
> > What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
> 
> I mean usecnt in struct ib_pd
> 
> 
> 
> > 
> >>>>>>>                                              |
> >>>>>>>      create_cm() // b. cid = 1, failed       |
> >>>>>>>        destroy_con_cq_qp()                   |
> >>>>>>>          rtrs_ib_dev_put()                   |
> >>>>>>>            dev_free()                        |
> >>>>>>>              ib_dealloc_pd(dev->ib_pd) << PD |
> >>>>>>>               is destroyed, but refcnt is    |
> >>>>>>>               still greater than 0           |
> > 
> > Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
> > if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> > can't be triggered. Is there other places could increase the refcnt?
> 
> 
> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
> 
> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
> refcnt is still 1.

Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.

Thanks

Guoqing Jiang April 14, 2023, 3:40 a.m. UTC | #9

On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
> On 13/04/2023 15:35, Guoqing Jiang wrote:
>> Hi,
>>
>> I take a closer look today.
>>
>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>
>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>> CPU0                                              CPU1
>>>>>>>> init_conns {                              |
>>>>>>>>       create_cm() // a. con[0] created        |
>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
>>>>>>>>                                               |  }
>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
> I mean usecnt in struct ib_pd
>
>
>
>>>>>>>>                                               |
>>>>>>>>       create_cm() // b. cid = 1, failed       |
>>>>>>>>         destroy_con_cq_qp()                   |
>>>>>>>>           rtrs_ib_dev_put()                   |
>>>>>>>>             dev_free()                        |
>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>                is destroyed, but refcnt is    |
>>>>>>>>                still greater than 0           |
>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)

The above can't be invoked, right?

>> can't be triggered. Is there other places could increase the refcnt?
> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>
> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
> refcnt is still 1.

I can see the path increase usecnt to 1.

rtrs_cq_qp_create -> create_qp
                     -> rdma_create_qp
                         -> ib_create_qp
                             -> create_qp
                             -> ib_qp_usecnt_inc which increases pd->usecnt

Where is another place to increase usecnt to 2?

>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
>> Otherwise there could be memory leak.
> we must ensure QP in con[0] is closed before destroying the PD.
> Currently destroy_con_cq_qp() subroutine will close the opened QP first.

Let me try another way, with below change, rtrs_ib_dev_put can't be called
from destroy_con_cq_qp, right?

+	if (!con->has_dev)
+		return;
  	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
  		rtrs_ib_dev_put(clt_path->s.dev);
  		clt_path->s.dev = NULL;

Then when will you dealloc pd and free rtrs_ib_dev?

Thanks,
Guoqing

Bob Pearson April 14, 2023, 4:25 a.m. UTC | #10

On 4/13/23 22:40, Guoqing Jiang wrote:
> 
> 
> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>> Hi,
>>>
>>> I take a closer look today.
>>>
>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>
>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>> CPU0                                              CPU1
>>>>>>>>> init_conns {                              |
>>>>>>>>>       create_cm() // a. con[0] created        |
>>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
>>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
>>>>>>>>>                                               |  }
>>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>> I mean usecnt in struct ib_pd
>>
>>
>>
>>>>>>>>>                                               |
>>>>>>>>>       create_cm() // b. cid = 1, failed       |
>>>>>>>>>         destroy_con_cq_qp()                   |
>>>>>>>>>           rtrs_ib_dev_put()                   |
>>>>>>>>>             dev_free()                        |
>>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>                is destroyed, but refcnt is    |
>>>>>>>>>                still greater than 0           |
>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> 
> The above can't be invoked, right?
> 
>>> can't be triggered. Is there other places could increase the refcnt?
>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>
>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>> refcnt is still 1.
> 
> I can see the path increase usecnt to 1.
> 
> rtrs_cq_qp_create -> create_qp
>                     -> rdma_create_qp
>                         -> ib_create_qp
>                             -> create_qp
>                             -> ib_qp_usecnt_inc which increases pd->usecnt
> 
> Where is another place to increase usecnt to 2?
> 
>>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
>>> Otherwise there could be memory leak.
>> we must ensure QP in con[0] is closed before destroying the PD.
>> Currently destroy_con_cq_qp() subroutine will close the opened QP first.
> 
> Let me try another way, with below change, rtrs_ib_dev_put can't be called
> from destroy_con_cq_qp, right?
> 
> +    if (!con->has_dev)
> +        return;
>      if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>          rtrs_ib_dev_put(clt_path->s.dev);
>          clt_path->s.dev = NULL;
> 
> Then when will you dealloc pd and free rtrs_ib_dev?
> 
> Thanks,
> Guoqing

I think that wondering into Leon's reference counting is a really bad idea. Currently the assumed rule
is that rdma-core keeps its ref counts and rxe keeps its. rxe defers the return from rxe_dealloc_pd()
until the rxe ref count drops to zero for that pd, sleeping if necessary. (There is a timeout value set
where rxe will return anyway but it will throw a WARN. If the timeout isn't long enough under heavy load
we could extend it.) If it doesn't happen, or it happens too soon, then there is a ref count bug in rxe
that needs to be fixed.

Fixing rxe ref count bugs is hard enough without entangling rdma-core ref counts into the mix.

Bob

Li Zhijian April 14, 2023, 5:37 a.m. UTC | #11

On 14/04/2023 11:40, Guoqing Jiang wrote:
> 
> 
> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>> Hi,
>>>
>>> I take a closer look today.
>>>
>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>
>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>> CPU0                                              CPU1
>>>>>>>>> init_conns {                              |
>>>>>>>>>       create_cm() // a. con[0] created        |
>>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
>>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
>>>>>>>>>                                               |  }
>>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>> I mean usecnt in struct ib_pd
>>
>>
>>
>>>>>>>>>                                               |
>>>>>>>>>       create_cm() // b. cid = 1, failed       |
>>>>>>>>>         destroy_con_cq_qp()                   |
>>>>>>>>>           rtrs_ib_dev_put()                   |
>>>>>>>>>             dev_free()                        |
>>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>                is destroyed, but refcnt is    |
>>>>>>>>>                still greater than 0           |
>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> 
> The above can't be invoked, right?
> 
>>> can't be triggered. Is there other places could increase the refcnt?
>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>
>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>> refcnt is still 1.
> 
> I can see the path increase usecnt to 1.
> 
> rtrs_cq_qp_create -> create_qp
>                      -> rdma_create_qp
>                          -> ib_create_qp
>                              -> create_qp
>                              -> ib_qp_usecnt_inc which increases pd->usecnt
> 
> Where is another place to increase usecnt to 2?

It should be
ib_create_qp　...
   -> rxe_create_qp
     -> rxe_qp_from_init
        -> rxe_get(pd) <<< pd's refcnt will be increased.


> 
>>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
>>> Otherwise there could be memory leak.
>> we must ensure QP in con[0] is closed before destroying the PD.
>> Currently destroy_con_cq_qp() subroutine will close the opened QP first.
> 
> Let me try another way, with below change, rtrs_ib_dev_put can't be called
> from destroy_con_cq_qp, right?

Not really, con[0]->has_dev is true, so con[0]'s cleanup will call rtrs_ib_dev_put()

Without this patch, when con[1] failed, con[1]'s cleanup will be called first. then call con[0]'s cleanup.
After this change, con[1]'s cleanup will not call rtrs_ib_dev_put, but it will be called the later con[0]'s cleanup.


Thanks
Zhijian

> 
> +    if (!con->has_dev)
> +        return;
>       if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>           rtrs_ib_dev_put(clt_path->s.dev);
>           clt_path->s.dev = NULL;
> 
> Then when will you dealloc pd and free rtrs_ib_dev?
> 
> Thanks,
> Guoqing

Jinpu Wang April 14, 2023, 6:03 a.m. UTC | #12

Hi Zhijian, Guoqing, Leon, Bob

First of all, thanks for the patch and discussion.

On Fri, Apr 14, 2023 at 7:37 AM Zhijian Li (Fujitsu)
<lizhijian@fujitsu.com> wrote:
>
>
>
> On 14/04/2023 11:40, Guoqing Jiang wrote:
> >
> >
> > On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
> >> On 13/04/2023 15:35, Guoqing Jiang wrote:
> >>> Hi,
> >>>
> >>> I take a closer look today.
> >>>
> >>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
> >>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
> >>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
> >>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
> >>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> >>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
> >>>>>>>>>
> >>>>>>>>> Precodition: clt_path->s.con_num is 2.
> >>>>>>>>> So 2 cm connection will be created as below:
> >>>>>>>>> CPU0                                              CPU1
> >>>>>>>>> init_conns {                              |
> >>>>>>>>>       create_cm() // a. con[0] created        |
> >>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
> >>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
> >>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
> >>>>>>>>>                                               |  }
> >>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
> >>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
> >> I mean usecnt in struct ib_pd
> >>
> >>
> >>
> >>>>>>>>>                                               |
> >>>>>>>>>       create_cm() // b. cid = 1, failed       |
> >>>>>>>>>         destroy_con_cq_qp()                   |
> >>>>>>>>>           rtrs_ib_dev_put()                   |
> >>>>>>>>>             dev_free()                        |
> >>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
> >>>>>>>>>                is destroyed, but refcnt is    |
> >>>>>>>>>                still greater than 0           |
> >>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
> >>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> >
> > The above can't be invoked, right?
> >
> >>> can't be triggered. Is there other places could increase the refcnt?
> >> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
> >>
> >> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
> >> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
> >> refcnt is still 1.
> >
> > I can see the path increase usecnt to 1.
> >
> > rtrs_cq_qp_create -> create_qp
> >                      -> rdma_create_qp
> >                          -> ib_create_qp
> >                              -> create_qp
> >                              -> ib_qp_usecnt_inc which increases pd->usecnt
> >
> > Where is another place to increase usecnt to 2?
>
> It should be
> ib_create_qp　...
>    -> rxe_create_qp
>      -> rxe_qp_from_init
>         -> rxe_get(pd) <<< pd's refcnt will be increased.

IIUC, this problem is rxe specific, because rxe manipulate refcnt
itself? I checked mlx5/mlx4 they do not change the refcnt of pd when
create_kernel_qp.

So question is then if the bug is on rxe side or rtrs side?

Zhijian how do you reproduce the warning? do you inject error explictly?


Regards!

>
>
> >
> >>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
> >>> Otherwise there could be memory leak.
> >> we must ensure QP in con[0] is closed before destroying the PD.
> >> Currently destroy_con_cq_qp() subroutine will close the opened QP first.
> >
> > Let me try another way, with below change, rtrs_ib_dev_put can't be called
> > from destroy_con_cq_qp, right?
>
> Not really, con[0]->has_dev is true, so con[0]'s cleanup will call rtrs_ib_dev_put()
>
> Without this patch, when con[1] failed, con[1]'s cleanup will be called first. then call con[0]'s cleanup.
> After this change, con[1]'s cleanup will not call rtrs_ib_dev_put, but it will be called the later con[0]'s cleanup.
>
>
> Thanks
> Zhijian
>
> >
> > +    if (!con->has_dev)
> > +        return;
> >       if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
> >           rtrs_ib_dev_put(clt_path->s.dev);
> >           clt_path->s.dev = NULL;
> >
> > Then when will you dealloc pd and free rtrs_ib_dev?
> >
> > Thanks,
> > Guoqing

Guoqing Jiang April 14, 2023, 6:04 a.m. UTC | #13

On 4/14/23 13:37, Zhijian Li (Fujitsu) wrote:
>
> On 14/04/2023 11:40, Guoqing Jiang wrote:
>>
>> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>> Hi,
>>>>
>>>> I take a closer look today.
>>>>
>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>
>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>> init_conns {                              |
>>>>>>>>>>        create_cm() // a. con[0] created        |
>>>>>>>>>>                                                |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>                                                |    rtrs_rdma_addr_resolved()
>>>>>>>>>>                                                |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>                                                |  }
>>>>>>>>>>                                                | in this moment, refcnt of PD was increased to 2+
>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>> I mean usecnt in struct ib_pd
>>>
>>>
>>>
>>>>>>>>>>                                                |
>>>>>>>>>>        create_cm() // b. cid = 1, failed       |
>>>>>>>>>>          destroy_con_cq_qp()                   |
>>>>>>>>>>            rtrs_ib_dev_put()                   |
>>>>>>>>>>              dev_free()                        |
>>>>>>>>>>                ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>                 is destroyed, but refcnt is    |
>>>>>>>>>>                 still greater than 0           |
>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>> The above can't be invoked, right?
>>
>>>> can't be triggered. Is there other places could increase the refcnt?
>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>
>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>> refcnt is still 1.
>> I can see the path increase usecnt to 1.
>>
>> rtrs_cq_qp_create -> create_qp
>>                       -> rdma_create_qp
>>                           -> ib_create_qp
>>                               -> create_qp
>>                               -> ib_qp_usecnt_inc which increases pd->usecnt
>>
>> Where is another place to increase usecnt to 2?
> It should be
> ib_create_qp　...
>     -> rxe_create_qp
>       -> rxe_qp_from_init
>          -> rxe_get(pd) <<< pd's refcnt will be increased.

Isn't rxe_get just increase elem->ref_cnt?

https://elixir.bootlin.com/linux/v6.3-rc6/source/drivers/infiniband/sw/rxe/rxe_pool.c#L240

>>>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
>>>> Otherwise there could be memory leak.
>>> we must ensure QP in con[0] is closed before destroying the PD.
>>> Currently destroy_con_cq_qp() subroutine will close the opened QP first.
>> Let me try another way, with below change, rtrs_ib_dev_put can't be called
>> from destroy_con_cq_qp, right?
> Not really, con[0]->has_dev is true, so con[0]'s cleanup will call rtrs_ib_dev_put()
>
> Without this patch, when con[1] failed, con[1]'s cleanup will be called first. then call con[0]'s cleanup.
> After this change, con[1]'s cleanup will not call rtrs_ib_dev_put, but it will be called the later con[0]'s cleanup.

But rtrs_ib_dev_put relies on dev_ref, if con[1] returns earlier without 
decrease dev_ref
(it is shared among connections), how rtrs_ib_dev_put can be called?

Thanks,
Guoqing

Li Zhijian April 14, 2023, 6:47 a.m. UTC | #14

On 14/04/2023 14:03, Jinpu Wang wrote:
>>> I can see the path increase usecnt to 1.
>>>
>>> rtrs_cq_qp_create -> create_qp
>>>                       -> rdma_create_qp
>>>                           -> ib_create_qp
>>>                               -> create_qp
>>>                               -> ib_qp_usecnt_inc which increases pd->usecnt
>>>
>>> Where is another place to increase usecnt to 2?
>> It should be
>> ib_create_qp　...
>>     -> rxe_create_qp
>>       -> rxe_qp_from_init
>>          -> rxe_get(pd) <<< pd's refcnt will be increased.
> IIUC, this problem is rxe specific, because rxe manipulate refcnt
> itself? I checked mlx5/mlx4 they do not change the refcnt of pd when
> create_kernel_qp.
> 
> So question is then if the bug is on rxe side or rtrs side?
> 
> Zhijian how do you reproduce the warning? do you inject error explictly?

# cat rnbd-self.sh
#!/bin/bash

/root/rpma/tools/config_softroce.sh eth0
modprobe rnbd_server
modprobe rnbd_client

while true;
do
         echo "sessname=xyz path=ip:<server-ip> device_path=/dev/nvme0n1" > /sys/devices/virtual/rnbd-client/ctl/map_device
         for i in /sys/block/rnbd*/rnbd/unmap_device
         do
                 echo "normal" > $i
         done
done

Li Zhijian April 14, 2023, 10:09 a.m. UTC | #15

On 14/04/2023 14:04, Guoqing Jiang wrote:
> 
> 
> On 4/14/23 13:37, Zhijian Li (Fujitsu) wrote:
>>
>> On 14/04/2023 11:40, Guoqing Jiang wrote:
>>>
>>> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>>> Hi,
>>>>>
>>>>> I take a closer look today.
>>>>>
>>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>>
>>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>>> init_conns {                              |
>>>>>>>>>>>        create_cm() // a. con[0] created        |
>>>>>>>>>>>                                                |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>>                                                |    rtrs_rdma_addr_resolved()
>>>>>>>>>>>                                                |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>>                                                |  }
>>>>>>>>>>>                                                | in this moment, refcnt of PD was increased to 2+
>>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>>> I mean usecnt in struct ib_pd
>>>>
>>>>
>>>>
>>>>>>>>>>>                                                |
>>>>>>>>>>>        create_cm() // b. cid = 1, failed       |
>>>>>>>>>>>          destroy_con_cq_qp()                   |
>>>>>>>>>>>            rtrs_ib_dev_put()                   |
>>>>>>>>>>>              dev_free()                        |
>>>>>>>>>>>                ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>>                 is destroyed, but refcnt is    |
>>>>>>>>>>>                 still greater than 0           |
>>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>> The above can't be invoked, right?
>>>
>>>>> can't be triggered. Is there other places could increase the refcnt?
>>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>>
>>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>>> refcnt is still 1.
>>> I can see the path increase usecnt to 1.
>>>
>>> rtrs_cq_qp_create -> create_qp
>>>                       -> rdma_create_qp
>>>                           -> ib_create_qp
>>>                               -> create_qp
>>>                               -> ib_qp_usecnt_inc which increases pd->usecnt
>>>
>>> Where is another place to increase usecnt to 2?
>> It should be
>> ib_create_qp　...
>>     -> rxe_create_qp
>>       -> rxe_qp_from_init
>>          -> rxe_get(pd) <<< pd's refcnt will be increased.
> 
> Isn't rxe_get just increase elem->ref_cnt?

Yes, that's true.



> 
> https://elixir.bootlin.com/linux/v6.3-rc6/source/drivers/infiniband/sw/rxe/rxe_pool.c#L240
> 
>>>>> Then what is the appropriate time to call destroy_con_cq_qp for this scenario?
>>>>> Otherwise there could be memory leak.
>>>> we must ensure QP in con[0] is closed before destroying the PD.
>>>> Currently destroy_con_cq_qp() subroutine will close the opened QP first.
>>> Let me try another way, with below change, rtrs_ib_dev_put can't be called
>>> from destroy_con_cq_qp, right?
>> Not really, con[0]->has_dev is true, so con[0]'s cleanup will call rtrs_ib_dev_put()
>>
>> Without this patch, when con[1] failed, con[1]'s cleanup will be called first. then call con[0]'s cleanup.
>> After this change, con[1]'s cleanup will not call rtrs_ib_dev_put, but it will be called the later con[0]'s cleanup.
> 
> But rtrs_ib_dev_put relies on dev_ref, if con[1] returns earlier without decrease dev_ref
> (it is shared among connections), how rtrs_ib_dev_put can be called?
> 

we must ensure each connections that take dev_ref decrease dev_ref during its cleanup path.
So the new flag con->has_dev added to track if the con has taken the dev_ref.




> Thanks,
> Guoqing

Zhu Yanjun April 14, 2023, 3:58 p.m. UTC | #16

在 2023/4/13 21:24, Leon Romanovsky 写道:
> On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
>>
>>
>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>> Hi,
>>>
>>> I take a closer look today.
>>>
>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>
>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>
>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>
>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>
>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>> CPU0                                              CPU1
>>>>>>>>> init_conns {                              |
>>>>>>>>>       create_cm() // a. con[0] created        |
>>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
>>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
>>>>>>>>>                                               |  }
>>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
>>>
>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>
>> I mean usecnt in struct ib_pd
>>
>>
>>
>>>
>>>>>>>>>                                               |
>>>>>>>>>       create_cm() // b. cid = 1, failed       |
>>>>>>>>>         destroy_con_cq_qp()                   |
>>>>>>>>>           rtrs_ib_dev_put()                   |
>>>>>>>>>             dev_free()                        |
>>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>                is destroyed, but refcnt is    |
>>>>>>>>>                still greater than 0           |
>>>
>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>> can't be triggered. Is there other places could increase the refcnt?
>>
>>
>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>
>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>> refcnt is still 1.
> 
> Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.
Agree. We should find out why refcnt 1 and fix this problem.

Zhu Yanjun
> 
> Thanks

Li Zhijian April 17, 2023, 2:18 a.m. UTC | #17

On 14/04/2023 23:58, Zhu Yanjun wrote:
> 在 2023/4/13 21:24, Leon Romanovsky 写道:
>> On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
>>>
>>>
>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>> Hi,
>>>>
>>>> I take a closer look today.
>>>>
>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>>
>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>>
>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>>
>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>
>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>> init_conns {                              |
>>>>>>>>>>       create_cm() // a. con[0] created        |
>>>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
>>>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>                                               |  }
>>>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
>>>>
>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>>
>>> I mean usecnt in struct ib_pd
>>>
>>>
>>>
>>>>
>>>>>>>>>>                                               |
>>>>>>>>>>       create_cm() // b. cid = 1, failed       |
>>>>>>>>>>         destroy_con_cq_qp()                   |
>>>>>>>>>>           rtrs_ib_dev_put()                   |
>>>>>>>>>>             dev_free()                        |
>>>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>                is destroyed, but refcnt is    |
>>>>>>>>>>                still greater than 0           |
>>>>
>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>>> can't be triggered. Is there other places could increase the refcnt?
>>>
>>>
>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>
>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>> refcnt is still 1.
>>
>> Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.



> +	if (!con->has_dev)
> +		return;
>  	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>  		rtrs_ib_dev_put(clt_path->s.dev);
>  		clt_path->s.dev = NULL;

Currently, without this patch:
1. PD and clt_path->s.dev are shared among connections.
2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
    clt_path->s.dev become zero, it will destroy PD.
4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.


Thanks
Zhijian

> Agree. We should find out why refcnt 1 and fix this problem.




> 
> Zhu Yanjun
>>
>> Thanks
>

Guoqing Jiang April 17, 2023, 3:08 a.m. UTC | #18

On 4/14/23 18:09, Zhijian Li (Fujitsu) wrote:
>
> On 14/04/2023 14:04, Guoqing Jiang wrote:
>>
>> On 4/14/23 13:37, Zhijian Li (Fujitsu) wrote:
>>> On 14/04/2023 11:40, Guoqing Jiang wrote:
>>>> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>>>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I take a closer look today.
>>>>>>
>>>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>>>
>>>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>>>> init_conns {                              |
>>>>>>>>>>>>         create_cm() // a. con[0] created        |
>>>>>>>>>>>>                                                 |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>>>                                                 |    rtrs_rdma_addr_resolved()
>>>>>>>>>>>>                                                 |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>>>                                                 |  }
>>>>>>>>>>>>                                                 | in this moment, refcnt of PD was increased to 2+
>>>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>>>> I mean usecnt in struct ib_pd
>>>>>
>>>>>>>>>>>>                                                 |
>>>>>>>>>>>>         create_cm() // b. cid = 1, failed       |
>>>>>>>>>>>>           destroy_con_cq_qp()                   |
>>>>>>>>>>>>             rtrs_ib_dev_put()                   |
>>>>>>>>>>>>               dev_free()                        |
>>>>>>>>>>>>                 ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>>>                  is destroyed, but refcnt is    |
>>>>>>>>>>>>                  still greater than 0           |
>>>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>>> The above can't be invoked, right?
>>>>
>>>>>> can't be triggered. Is there other places could increase the refcnt?
>>>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>>>
>>>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>>>> refcnt is still 1.
>>>> I can see the path increase usecnt to 1.
>>>>
>>>> rtrs_cq_qp_create -> create_qp
>>>>                        -> rdma_create_qp
>>>>                            -> ib_create_qp
>>>>                                -> create_qp
>>>>                                -> ib_qp_usecnt_inc which increases pd->usecnt
>>>>
>>>> Where is another place to increase usecnt to 2?
>>> It should be
>>> ib_create_qp　...
>>>      -> rxe_create_qp
>>>        -> rxe_qp_from_init
>>>           -> rxe_get(pd) <<< pd's refcnt will be increased.
>> Isn't rxe_get just increase elem->ref_cnt?
> Yes, that's true.

I am confused, does increase ref_cnt equal to increase usecnt?
If not, then where is another place to increase usecnt to 2?

BTW, I traced with 6.3-rc5, seems pd's usecnt is only increase once
after create one connection.

[ 6941.525088] in init_conns 2353 con_num=3
[ 6941.525732] in create_con_cq_qp 1648
[ 6941.525944] in rtrs_cq_qp_create 311 con->cid=0 
path->dev->ib_pd->usecnt=1
[ 6941.532460] in create_con_cq_qp 1648
[ 6941.532746] in rtrs_cq_qp_create 311 con->cid=1 
path->dev->ib_pd->usecnt=2
[ 6941.533183] in create_con_cq_qp 1648
[ 6941.533464] in rtrs_cq_qp_create 311 con->cid=2 
path->dev->ib_pd->usecnt=3
[ 6941.533685] in init_conns 2365, clt_path->s.dev->ib_pd->usecnt=3
[ 6941.535680] in init_conns 2371, clt_path->s.dev->ib_pd->usecnt=515

Thanks,
Guoqing

Leon Romanovsky April 17, 2023, 6:04 p.m. UTC | #19

On Mon, Apr 17, 2023 at 02:18:24AM +0000, Zhijian Li (Fujitsu) wrote:
> 
> 
> On 14/04/2023 23:58, Zhu Yanjun wrote:
> > 在 2023/4/13 21:24, Leon Romanovsky 写道:
> >> On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>
> >>>
> >>> On 13/04/2023 15:35, Guoqing Jiang wrote:
> >>>> Hi,
> >>>>
> >>>> I take a closer look today.
> >>>>
> >>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
> >>>>>
> >>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
> >>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>>>>>
> >>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
> >>>>>>>>
> >>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
> >>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> >>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
> >>>>>>>>>>
> >>>>>>>>>> Precodition: clt_path->s.con_num is 2.
> >>>>>>>>>> So 2 cm connection will be created as below:
> >>>>>>>>>> CPU0                                              CPU1
> >>>>>>>>>> init_conns {                              |
> >>>>>>>>>>       create_cm() // a. con[0] created        |
> >>>>>>>>>>                                               |  a'. rtrs_clt_rdma_cm_handler() {
> >>>>>>>>>>                                               |    rtrs_rdma_addr_resolved()
> >>>>>>>>>>                                               |      create_con_cq_qp(con); << con[0]
> >>>>>>>>>>                                               |  }
> >>>>>>>>>>                                               | in this moment, refcnt of PD was increased to 2+
> >>>>
> >>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
> >>>
> >>> I mean usecnt in struct ib_pd
> >>>
> >>>
> >>>
> >>>>
> >>>>>>>>>>                                               |
> >>>>>>>>>>       create_cm() // b. cid = 1, failed       |
> >>>>>>>>>>         destroy_con_cq_qp()                   |
> >>>>>>>>>>           rtrs_ib_dev_put()                   |
> >>>>>>>>>>             dev_free()                        |
> >>>>>>>>>>               ib_dealloc_pd(dev->ib_pd) << PD |
> >>>>>>>>>>                is destroyed, but refcnt is    |
> >>>>>>>>>>                still greater than 0           |
> >>>>
> >>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
> >>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> >>>> can't be triggered. Is there other places could increase the refcnt?
> >>>
> >>>
> >>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
> >>>
> >>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
> >>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
> >>> refcnt is still 1.
> >>
> >> Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.
> 
> 
> 
> > +	if (!con->has_dev)
> > +		return;
> >  	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
> >  		rtrs_ib_dev_put(clt_path->s.dev);
> >  		clt_path->s.dev = NULL;
> 
> Currently, without this patch:
> 1. PD and clt_path->s.dev are shared among connections.
> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>     clt_path->s.dev become zero, it will destroy PD.
> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.

So please fix it by making sure that failure to create con[1] will
release resources which were allocated. If con[1] didn't increase
s.dev_ref, it shouldn't decrease it either.

Thanks

> 
> 
> Thanks
> Zhijian
> 
> > Agree. We should find out why refcnt 1 and fix this problem.
> 
> 
> 
> 
> > 
> > Zhu Yanjun
> >>
> >> Thanks
> >

Li Zhijian April 18, 2023, 6:47 a.m. UTC | #20

On 17/04/2023 11:08, Guoqing Jiang wrote:
> 
> 
> On 4/14/23 18:09, Zhijian Li (Fujitsu) wrote:
>>
>> On 14/04/2023 14:04, Guoqing Jiang wrote:
>>>
>>> On 4/14/23 13:37, Zhijian Li (Fujitsu) wrote:
>>>> On 14/04/2023 11:40, Guoqing Jiang wrote:
>>>>> On 4/13/23 16:12, Zhijian Li (Fujitsu) wrote:
>>>>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> I take a closer look today.
>>>>>>>
>>>>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>>>>> init_conns {                              |
>>>>>>>>>>>>>         create_cm() // a. con[0] created        |
>>>>>>>>>>>>>                                                 |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>>>>                                                 |    rtrs_rdma_addr_resolved()
>>>>>>>>>>>>>                                                 |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>>>>                                                 |  }
>>>>>>>>>>>>>                                                 | in this moment, refcnt of PD was increased to 2+
>>>>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>>>>> I mean usecnt in struct ib_pd
>>>>>>
>>>>>>>>>>>>>                                                 |
>>>>>>>>>>>>>         create_cm() // b. cid = 1, failed       |
>>>>>>>>>>>>>           destroy_con_cq_qp()                   |
>>>>>>>>>>>>>             rtrs_ib_dev_put()                   |
>>>>>>>>>>>>>               dev_free()                        |
>>>>>>>>>>>>>                 ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>>>>                  is destroyed, but refcnt is    |
>>>>>>>>>>>>>                  still greater than 0           |
>>>>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>>>> The above can't be invoked, right?
>>>>>
>>>>>>> can't be triggered. Is there other places could increase the refcnt?
>>>>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>>>>
>>>>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>>>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>>>>> refcnt is still 1.
>>>>> I can see the path increase usecnt to 1.
>>>>>
>>>>> rtrs_cq_qp_create -> create_qp
>>>>>                        -> rdma_create_qp
>>>>>                            -> ib_create_qp
>>>>>                                -> create_qp
>>>>>                                -> ib_qp_usecnt_inc which increases pd->usecnt
>>>>>
>>>>> Where is another place to increase usecnt to 2?
>>>> It should be
>>>> ib_create_qp　...
>>>>      -> rxe_create_qp
>>>>        -> rxe_qp_from_init
>>>>           -> rxe_get(pd) <<< pd's refcnt will be increased.
>>> Isn't rxe_get just increase elem->ref_cnt?
>> Yes, that's true.
> 
> I am confused, does increase ref_cnt equal to increase usecnt?


I need to apologize for my mistake. I have been referring to the elem.ref_cnt of the rxe driver as the refcnt of PD.


> If not, then where is another place to increase usecnt to 2?
> 
> BTW, I traced with 6.3-rc5, seems pd's usecnt is only increase once
> after create one connection.

And the warning mentioned above it also pointed to the PD's elem.ref_cnt.

> 
> [ 6941.525088] in init_conns 2353 con_num=3
> [ 6941.525732] in create_con_cq_qp 1648
> [ 6941.525944] in rtrs_cq_qp_create 311 con->cid=0 path->dev->ib_pd->usecnt=1
> [ 6941.532460] in create_con_cq_qp 1648
> [ 6941.532746] in rtrs_cq_qp_create 311 con->cid=1 path->dev->ib_pd->usecnt=2
> [ 6941.533183] in create_con_cq_qp 1648
> [ 6941.533464] in rtrs_cq_qp_create 311 con->cid=2 path->dev->ib_pd->usecnt=3
> [ 6941.533685] in init_conns 2365, clt_path->s.dev->ib_pd->usecnt=3
> [ 6941.535680] in init_conns 2371, clt_path->s.dev->ib_pd->usecnt=515

Thanks
Zhijian

below is a piece of code that i used to debug this issue.

--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -1730,15 +1730,39 @@ static int create_con_cq_qp(struct rtrs_clt_con *con)
         return err;
  }
  
+struct rxe_pool;
+struct rxe_pool_elem {
+       struct rxe_pool         *pool;
+       void                    *obj;
+       struct kref             ref_cnt;
+       struct list_head        list;
+       struct completion       complete;
+       u32                     index;
+};
+
+struct rxe_pd {
+       struct ib_pd            ibpd;
+       struct rxe_pool_elem    elem;
+};
+
+static inline struct rxe_pd *to_rpd(struct ib_pd *pd)
+{
+       return pd ? container_of(pd, struct rxe_pd, ibpd) : NULL;
+}
+
+#define rxe_read(obj) kref_read(&(obj)->elem.ref_cnt)
  static void destroy_con_cq_qp(struct rtrs_clt_con *con)
  {
         struct rtrs_clt_path *clt_path = to_clt_path(con->c.path);
+       struct rtrs_ib_dev *dev = clt_path->s.dev;
+       struct rxe_pd *pd = to_rpd(dev->ib_pd);
  
         /*
          * Be careful here: destroy_con_cq_qp() can be called even
          * create_con_cq_qp() failed, see comments there.
          */
         lockdep_assert_held(&con->con_mutex);
+       rtrs_info(clt_path->clt, "%s: clt_path->s.dev_ref: %d, pd %px, ref: %d\n", __func__, clt_path->s.dev_ref, &pd->elem, rxe_read(pd));
         rtrs_cq_qp_destroy(&con->c);
         if (con->rsp_ius) {
                 rtrs_iu_free(con->rsp_ius, clt_path->s.dev->ib_dev,
@@ -1746,7 +1770,8 @@ static void destroy_con_cq_qp(struct rtrs_clt_con *con)
                 con->rsp_ius = NULL;
                 con->queue_num = 0;
         }
+       rtrs_info(clt_path->clt, "%s: clt_path->s.dev_ref: %d, pd %px, ref: %d\n", __func__, clt_path->s.dev_ref, &pd->elem, rxe_read(pd));
         if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
                 rtrs_ib_dev_put(clt_path->s.dev);
                 clt_path->s.dev = NULL;



> 
> Thanks,
> Guoqing

Li Zhijian April 18, 2023, 7:04 a.m. UTC | #21

On 18/04/2023 02:04, Leon Romanovsky wrote:
> On Mon, Apr 17, 2023 at 02:18:24AM +0000, Zhijian Li (Fujitsu) wrote:
>>
>>
>> On 14/04/2023 23:58, Zhu Yanjun wrote:
>>> 在 2023/4/13 21:24, Leon Romanovsky 写道:
>>>> On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>
>>>>>
>>>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I take a closer look today.
>>>>>>
>>>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
>>>>>>>
>>>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
>>>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
>>>>>>>>>
>>>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
>>>>>>>>>>
>>>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
>>>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
>>>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
>>>>>>>>>>>>
>>>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
>>>>>>>>>>>> So 2 cm connection will be created as below:
>>>>>>>>>>>> CPU0                                              CPU1
>>>>>>>>>>>> init_conns {                              |
>>>>>>>>>>>>        create_cm() // a. con[0] created        |
>>>>>>>>>>>>                                                |  a'. rtrs_clt_rdma_cm_handler() {
>>>>>>>>>>>>                                                |    rtrs_rdma_addr_resolved()
>>>>>>>>>>>>                                                |      create_con_cq_qp(con); << con[0]
>>>>>>>>>>>>                                                |  }
>>>>>>>>>>>>                                                | in this moment, refcnt of PD was increased to 2+
>>>>>>
>>>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
>>>>>
>>>>> I mean usecnt in struct ib_pd
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>>>>>>>                                                |
>>>>>>>>>>>>        create_cm() // b. cid = 1, failed       |
>>>>>>>>>>>>          destroy_con_cq_qp()                   |
>>>>>>>>>>>>            rtrs_ib_dev_put()                   |
>>>>>>>>>>>>              dev_free()                        |
>>>>>>>>>>>>                ib_dealloc_pd(dev->ib_pd) << PD |
>>>>>>>>>>>>                 is destroyed, but refcnt is    |
>>>>>>>>>>>>                 still greater than 0           |
>>>>>>
>>>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
>>>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
>>>>>> can't be triggered. Is there other places could increase the refcnt?
>>>>>
>>>>>
>>>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
>>>>>
>>>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
>>>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
>>>>> refcnt is still 1.
>>>>
>>>> Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.
>>
>>
>>
>>> +	if (!con->has_dev)
>>> +		return;
>>>   	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>>>   		rtrs_ib_dev_put(clt_path->s.dev);
>>>   		clt_path->s.dev = NULL;
>>
>> Currently, without this patch:
>> 1. PD and clt_path->s.dev are shared among connections.
>> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
>> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>>      clt_path->s.dev become zero, it will destroy PD.
>> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
> 
> So please fix it by making sure that failure to create con[1] will
> release resources which were allocated. If con[1] didn't increase
> s.dev_ref, it shouldn't decrease it either.

You are right, the current patch did exactly that.
It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
so that its cleanup phase will only decrease its s.dev properly.

Thanks
Zhijian


> 
> Thanks
> 
>>
>>
>> Thanks
>> Zhijian
>>
>>> Agree. We should find out why refcnt 1 and fix this problem.
>>
>>
>>
>>
>>>
>>> Zhu Yanjun
>>>>
>>>> Thanks
>>>

Leon Romanovsky April 18, 2023, 7:57 a.m. UTC | #22

On Tue, Apr 18, 2023 at 07:04:00AM +0000, Zhijian Li (Fujitsu) wrote:
> 
> 
> On 18/04/2023 02:04, Leon Romanovsky wrote:
> > On Mon, Apr 17, 2023 at 02:18:24AM +0000, Zhijian Li (Fujitsu) wrote:
> >>
> >>
> >> On 14/04/2023 23:58, Zhu Yanjun wrote:
> >>> 在 2023/4/13 21:24, Leon Romanovsky 写道:
> >>>> On Thu, Apr 13, 2023 at 08:12:15AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>>>
> >>>>>
> >>>>> On 13/04/2023 15:35, Guoqing Jiang wrote:
> >>>>>> Hi,
> >>>>>>
> >>>>>> I take a closer look today.
> >>>>>>
> >>>>>> On 4/12/23 09:15, Zhijian Li (Fujitsu) wrote:
> >>>>>>>
> >>>>>>> On 11/04/2023 20:26, Leon Romanovsky wrote:
> >>>>>>>> On Tue, Apr 11, 2023 at 02:43:46AM +0000, Zhijian Li (Fujitsu) wrote:
> >>>>>>>>>
> >>>>>>>>> On 10/04/2023 21:10, Guoqing Jiang wrote:
> >>>>>>>>>>
> >>>>>>>>>> On 4/10/23 20:08, Leon Romanovsky wrote:
> >>>>>>>>>>> On Mon, Apr 10, 2023 at 06:43:03AM +0000, Li Zhijian wrote:
> >>>>>>>>>>>> The warning occurs when destroying PD whose reference count is not zero.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Precodition: clt_path->s.con_num is 2.
> >>>>>>>>>>>> So 2 cm connection will be created as below:
> >>>>>>>>>>>> CPU0                                              CPU1
> >>>>>>>>>>>> init_conns {                              |
> >>>>>>>>>>>>        create_cm() // a. con[0] created        |
> >>>>>>>>>>>>                                                |  a'. rtrs_clt_rdma_cm_handler() {
> >>>>>>>>>>>>                                                |    rtrs_rdma_addr_resolved()
> >>>>>>>>>>>>                                                |      create_con_cq_qp(con); << con[0]
> >>>>>>>>>>>>                                                |  }
> >>>>>>>>>>>>                                                | in this moment, refcnt of PD was increased to 2+
> >>>>>>
> >>>>>> What do you mean "refcnt of PD"? usecnt in struct ib_pd or dev_ref.
> >>>>>
> >>>>> I mean usecnt in struct ib_pd
> >>>>>
> >>>>>
> >>>>>
> >>>>>>
> >>>>>>>>>>>>                                                |
> >>>>>>>>>>>>        create_cm() // b. cid = 1, failed       |
> >>>>>>>>>>>>          destroy_con_cq_qp()                   |
> >>>>>>>>>>>>            rtrs_ib_dev_put()                   |
> >>>>>>>>>>>>              dev_free()                        |
> >>>>>>>>>>>>                ib_dealloc_pd(dev->ib_pd) << PD |
> >>>>>>>>>>>>                 is destroyed, but refcnt is    |
> >>>>>>>>>>>>                 still greater than 0           |
> >>>>>>
> >>>>>> Assuming you mean "pd->usecnt". We only allocate pd in con[0] by rtrs_ib_dev_find_or_add,
> >>>>>> if con[1] failed to create cm, then alloc_path_reqs -> ib_alloc_mr -> atomic_inc(&pd->usecnt)
> >>>>>> can't be triggered. Is there other places could increase the refcnt?
> >>>>>
> >>>>>
> >>>>> Yes, when create a qp, it will also associate to this PD, that also mean refcnt of PD will be increased.
> >>>>>
> >>>>> When con[0](create_con_cq_qp) succeeded, refcnt of PD will be 2. and then when con[1] failed, since
> >>>>> QP didn't create, refcnt of PD is still 2. con[1]'s cleanup will destroy the PD(ib_dealloc_pd) since dev_ref = 1, after that its
> >>>>> refcnt is still 1.
> >>>>
> >>>> Why is refcnt 1 in con[1] destruction phase? It seems to me like a bug.
> >>
> >>
> >>
> >>> +	if (!con->has_dev)
> >>> +		return;
> >>>   	if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
> >>>   		rtrs_ib_dev_put(clt_path->s.dev);
> >>>   		clt_path->s.dev = NULL;
> >>
> >> Currently, without this patch:
> >> 1. PD and clt_path->s.dev are shared among connections.
> >> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> >> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
> >>      clt_path->s.dev become zero, it will destroy PD.
> >> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
> > 
> > So please fix it by making sure that failure to create con[1] will
> > release resources which were allocated. If con[1] didn't increase
> > s.dev_ref, it shouldn't decrease it either.
> 
> You are right, the current patch did exactly that.
> It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
> so that its cleanup phase will only decrease its s.dev properly.

The has_dev is a workaround and not a solution. In proper error unwind
sequence, you won't need extra flag.

Thanks

> 
> Thanks
> Zhijian
> 
> 
> > 
> > Thanks
> > 
> >>
> >>
> >> Thanks
> >> Zhijian
> >>
> >>> Agree. We should find out why refcnt 1 and fix this problem.
> >>
> >>
> >>
> >>
> >>>
> >>> Zhu Yanjun
> >>>>
> >>>> Thanks
> >>>

Li Zhijian April 19, 2023, 9:53 a.m. UTC | #23

Leon, Guoqing


On 18/04/2023 15:57, Leon Romanovsky wrote:
>>>> Currently, without this patch:
>>>> 1. PD and clt_path->s.dev are shared among connections.
>>>> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
>>>> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>>>>       clt_path->s.dev become zero, it will destroy PD.
>>>> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
>>> So please fix it by making sure that failure to create con[1] will
>>> release resources which were allocated. If con[1] didn't increase
>>> s.dev_ref, it shouldn't decrease it either.
>> You are right, the current patch did exactly that.
>> It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
>> so that its cleanup phase will only decrease its s.dev properly.
> The has_dev is a workaround and not a solution. In proper error unwind
> sequence, you won't need extra flag.
> 
> Thanks
> 

how about below changes

commit 61dba725384e226d472b8142d70d40d4103df87a
Author: Li Zhijian <lizhijian@fujitsu.com>
Date:   Wed Apr 19 17:42:26 2023 +0800
                                                                                                                    
     RDMA/rtrs: Fix rxe_dealloc_pd warning
                                                                                                                    
     con[0] always sets s.dev to 1, correspondingly, we should let it to
     release the last dev.
                                          
     Previously,
     1. PD and clt_path->s.dev are shared among connections.
     2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
     3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
        clt_path->s.dev become zero, it will destroy PD.
     4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
        but it try to decreased clt_path->s.dev <<< it's wrong to do that.
                               
     The warning occurs when destroying PD whose reference count is not zero.
     Precodition: clt_path->s.con_num is 2.
     So 2 cm connection will be created as below:
     CPU0                                              CPU1
     init_conns {                              |
       create_cm() // a. con[0] created        |
                                               |  a'. rtrs_clt_rdma_cm_handler() {
                                               |    rtrs_rdma_addr_resolved()
                                               |      create_con_cq_qp(con); << con[0]
                                               |  }
                                               | in this moment, refcnt of PD was increased to 2+
                                               |
       create_cm() // b. cid = 1, failed       |
         destroy_con_cq_qp()                   |
           rtrs_ib_dev_put()                   |
             dev_free()                        |
               ib_dealloc_pd(dev->ib_pd) << PD |
                is destroyed, but refcnt is    |
                still greater than 0           |
     }

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 80abf45a197a..1eb652dedca3 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -1743,6 +1743,15 @@ static void destroy_con_cq_qp(struct rtrs_clt_con *con)
                 con->rsp_ius = NULL;
                 con->queue_num = 0;
         }
+
+       /*
+        * Every con will try to decreased s.dev_ref, but we should
+        * reserve the last s.dev_ref for con[0]. In case con[1+]'s
+        * cleanup phase call rtrs_ib_dev_put(clt_path->s.dev) early.
+        */
+       if (con->c.cid != 0 && clt_path->s.dev_ref == 1)
+               return;
+
         if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
                 rtrs_ib_dev_put(clt_path->s.dev);
                 clt_path->s.dev = NULL;

Jinpu Wang April 19, 2023, 1:20 p.m. UTC | #24

On Wed, Apr 19, 2023 at 11:53 AM Zhijian Li (Fujitsu)
<lizhijian@fujitsu.com> wrote:
>
> Leon, Guoqing
>
>
> On 18/04/2023 15:57, Leon Romanovsky wrote:
> >>>> Currently, without this patch:
> >>>> 1. PD and clt_path->s.dev are shared among connections.
> >>>> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> >>>> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
> >>>>       clt_path->s.dev become zero, it will destroy PD.
> >>>> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
> >>> So please fix it by making sure that failure to create con[1] will
> >>> release resources which were allocated. If con[1] didn't increase
> >>> s.dev_ref, it shouldn't decrease it either.
> >> You are right, the current patch did exactly that.
> >> It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
> >> so that its cleanup phase will only decrease its s.dev properly.
> > The has_dev is a workaround and not a solution. In proper error unwind
> > sequence, you won't need extra flag.
> >
> > Thanks
> >
>
> how about below changes
>
> commit 61dba725384e226d472b8142d70d40d4103df87a
> Author: Li Zhijian <lizhijian@fujitsu.com>
> Date:   Wed Apr 19 17:42:26 2023 +0800
>
>      RDMA/rtrs: Fix rxe_dealloc_pd warning
>
>      con[0] always sets s.dev to 1, correspondingly, we should let it to
>      release the last dev.
>
>      Previously,
>      1. PD and clt_path->s.dev are shared among connections.
>      2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
>      3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>         clt_path->s.dev become zero, it will destroy PD.
>      4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
>         but it try to decreased clt_path->s.dev <<< it's wrong to do that.
>
>      The warning occurs when destroying PD whose reference count is not zero.
>      Precodition: clt_path->s.con_num is 2.
>      So 2 cm connection will be created as below:
>      CPU0                                              CPU1
>      init_conns {                              |
>        create_cm() // a. con[0] created        |
>                                                |  a'. rtrs_clt_rdma_cm_handler() {
>                                                |    rtrs_rdma_addr_resolved()
>                                                |      create_con_cq_qp(con); << con[0]
>                                                |  }
>                                                | in this moment, refcnt of PD was increased to 2+
>                                                |
>        create_cm() // b. cid = 1, failed       |
>          destroy_con_cq_qp()                   |
>            rtrs_ib_dev_put()                   |
>              dev_free()                        |
>                ib_dealloc_pd(dev->ib_pd) << PD |
>                 is destroyed, but refcnt is    |
>                 still greater than 0           |
>      }
>
> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> index 80abf45a197a..1eb652dedca3 100644
> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> @@ -1743,6 +1743,15 @@ static void destroy_con_cq_qp(struct rtrs_clt_con *con)
>                  con->rsp_ius = NULL;
>                  con->queue_num = 0;
>          }
> +
> +       /*
> +        * Every con will try to decreased s.dev_ref, but we should
> +        * reserve the last s.dev_ref for con[0]. In case con[1+]'s
> +        * cleanup phase call rtrs_ib_dev_put(clt_path->s.dev) early.
> +        */
> +       if (con->c.cid != 0 && clt_path->s.dev_ref == 1)
> +               return;
> +
>          if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>                  rtrs_ib_dev_put(clt_path->s.dev);
>                  clt_path->s.dev = NULL;

I run a regression test in our test env, it triggers a warning on

1681                 if (WARN_ON(clt_path->s.dev))

[ 1333.042633] ------------[ cut here ]------------
[ 1333.042650] WARNING: CPU: 8 PID: 559 at
/root/kernel-test/ibnbd2/rtrs/rtrs-clt.c:1681
rtrs_clt_rdma_cm_handler+0x864/0x8a0 [rtrs_client]
[ 1333.042651] Modules linked in: loop rnbd_client(O) rtrs_client(O)
rtrs_core(O) kvm_amd kvm input_leds led_class irqbypass crc32_pclmul
aesni_intel sp5100_tco evdev libaes watchdog sg k10temp crypto_simd
fam15h_power ipmi_si serio_raw cryptd ipmi_devintf glue_helper
ipmi_msghandler acpi_cpufreq button ib_ipoib ib_umad null_blk brd
rdma_cm iw_cm ib_cm ip_tables x_tables autofs4 raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx xor
raid6_pq libcrc32c raid1 raid0 linear mlx4_ib md_mod ib_uverbs ib_core
sd_mod t10_pi crc_t10dif crct10dif_generic ahci libahci
crct10dif_pclmul crct10dif_common crc32c_intel igb libata usb_storage
psmouse i2c_piix4 i2c_algo_bit mlx4_core dca scsi_mod i2c_core ptp
pps_core
[ 1333.042737] CPU: 8 PID: 559 Comm: kworker/u128:1 Tainted: G
  O      5.10.136-pserver-develop-5.10 #257
[ 1333.042738] Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00       09/04/2012
[ 1333.042752] Workqueue: rdma_cm cma_work_handler [rdma_cm]
[ 1333.042758] RIP: 0010:rtrs_clt_rdma_cm_handler+0x864/0x8a0 [rtrs_client]
[ 1333.042761] Code: ff bb ea ff ff ff e8 db a5 24 fc 49 8d b4 24 10
01 00 00 89 da 48 c7 c7 40 93 5b c0 e8 4b 47 21 fc 4d 8b 65 00 e9 15
fe ff ff <0f> 0b 4c 89 ff bb ea ff ff ff e8 ad a5 24 fc eb d0 0f 0b 4c
89 ff
[ 1333.042763] RSP: 0018:ffffaff68e57bdb0 EFLAGS: 00010286
[ 1333.042765] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9eddc0051420
[ 1333.042767] RDX: ffff9ee4ef716e40 RSI: ffff9f14ea288f30 RDI: ffff9eddc88db240
[ 1333.042768] RBP: ffffaff68e57be50 R08: 0000000000000000 R09: 006d635f616d6472
[ 1333.042769] R10: ffffaff68e57be68 R11: 0000000000000000 R12: ffff9edde1388000
[ 1333.042771] R13: ffff9eddc88db200 R14: ffff9edde1388000 R15: ffff9eddc88db240
[ 1333.042773] FS:  0000000000000000(0000) GS:ffff9eecc7c00000(0000)
knlGS:0000000000000000
[ 1333.042774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1333.042776] CR2: 00007f0ac4ed4004 CR3: 0000002b5040a000 CR4: 00000000000406e0
[ 1333.042777] Call Trace:
[ 1333.042790]  ? newidle_balance+0x25e/0x3c0
[ 1333.042795]  ? psi_group_change+0x43/0x230
[ 1333.042801]  ? cma_cm_event_handler+0x23/0xb0 [rdma_cm]
[ 1333.042807]  cma_cm_event_handler+0x23/0xb0 [rdma_cm]
[ 1333.042814]  cma_work_handler+0x5a/0xb0 [rdma_cm]
[ 1333.042819]  process_one_work+0x1f3/0x390
[ 1333.042822]  worker_thread+0x2d/0x3c0

Li Zhijian April 20, 2023, 2 a.m. UTC | #25

On 19/04/2023 21:20, Jinpu Wang wrote:
> On Wed, Apr 19, 2023 at 11:53 AM Zhijian Li (Fujitsu)
> <lizhijian@fujitsu.com> wrote:
>>
>> Leon, Guoqing
>>
>>
>> On 18/04/2023 15:57, Leon Romanovsky wrote:
>>>>>> Currently, without this patch:
>>>>>> 1. PD and clt_path->s.dev are shared among connections.
>>>>>> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
>>>>>> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>>>>>>        clt_path->s.dev become zero, it will destroy PD.
>>>>>> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
>>>>> So please fix it by making sure that failure to create con[1] will
>>>>> release resources which were allocated. If con[1] didn't increase
>>>>> s.dev_ref, it shouldn't decrease it either.
>>>> You are right, the current patch did exactly that.
>>>> It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
>>>> so that its cleanup phase will only decrease its s.dev properly.
>>> The has_dev is a workaround and not a solution. In proper error unwind
>>> sequence, you won't need extra flag.
>>>
>>> Thanks
>>>
>>
>> how about below changes
>>
>> commit 61dba725384e226d472b8142d70d40d4103df87a
>> Author: Li Zhijian <lizhijian@fujitsu.com>
>> Date:   Wed Apr 19 17:42:26 2023 +0800
>>
>>       RDMA/rtrs: Fix rxe_dealloc_pd warning
>>
>>       con[0] always sets s.dev to 1, correspondingly, we should let it to
>>       release the last dev.
>>
>>       Previously,
>>       1. PD and clt_path->s.dev are shared among connections.
>>       2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
>>       3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
>>          clt_path->s.dev become zero, it will destroy PD.
>>       4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
>>          but it try to decreased clt_path->s.dev <<< it's wrong to do that.
>>
>>       The warning occurs when destroying PD whose reference count is not zero.
>>       Precodition: clt_path->s.con_num is 2.
>>       So 2 cm connection will be created as below:
>>       CPU0                                              CPU1
>>       init_conns {                              |
>>         create_cm() // a. con[0] created        |
>>                                                 |  a'. rtrs_clt_rdma_cm_handler() {
>>                                                 |    rtrs_rdma_addr_resolved()
>>                                                 |      create_con_cq_qp(con); << con[0]
>>                                                 |  }
>>                                                 | in this moment, refcnt of PD was increased to 2+
>>                                                 |
>>         create_cm() // b. cid = 1, failed       |
>>           destroy_con_cq_qp()                   |
>>             rtrs_ib_dev_put()                   |
>>               dev_free()                        |
>>                 ib_dealloc_pd(dev->ib_pd) << PD |
>>                  is destroyed, but refcnt is    |
>>                  still greater than 0           |
>>       }
>>
>> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> index 80abf45a197a..1eb652dedca3 100644
>> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
>> @@ -1743,6 +1743,15 @@ static void destroy_con_cq_qp(struct rtrs_clt_con *con)
>>                   con->rsp_ius = NULL;
>>                   con->queue_num = 0;
>>           }
>> +
>> +       /*
>> +        * Every con will try to decreased s.dev_ref, but we should
>> +        * reserve the last s.dev_ref for con[0]. In case con[1+]'s
>> +        * cleanup phase call rtrs_ib_dev_put(clt_path->s.dev) early.
>> +        */
>> +       if (con->c.cid != 0 && clt_path->s.dev_ref == 1)
>> +               return;
>> +
>>           if (clt_path->s.dev_ref && !--clt_path->s.dev_ref) {
>>                   rtrs_ib_dev_put(clt_path->s.dev);
>>                   clt_path->s.dev = NULL;
> 

Jinpu, thanks for your testing.

Indeed, above changes are not correct. it breaks the normal cleanup like below:
for (i=0; i < N, i++)
   destroy_con_cq_qp(con[i])


Thanks
Zhijian

> I run a regression test in our test env, it triggers a warning on
> 
> 1681                 if (WARN_ON(clt_path->s.dev))
> 
> [ 1333.042633] ------------[ cut here ]------------
> [ 1333.042650] WARNING: CPU: 8 PID: 559 at
> /root/kernel-test/ibnbd2/rtrs/rtrs-clt.c:1681
> rtrs_clt_rdma_cm_handler+0x864/0x8a0 [rtrs_client]
> [ 1333.042651] Modules linked in: loop rnbd_client(O) rtrs_client(O)
> rtrs_core(O) kvm_amd kvm input_leds led_class irqbypass crc32_pclmul
> aesni_intel sp5100_tco evdev libaes watchdog sg k10temp crypto_simd
> fam15h_power ipmi_si serio_raw cryptd ipmi_devintf glue_helper
> ipmi_msghandler acpi_cpufreq button ib_ipoib ib_umad null_blk brd
> rdma_cm iw_cm ib_cm ip_tables x_tables autofs4 raid10 raid456
> async_raid6_recov async_memcpy async_pq async_xor async_tx xor
> raid6_pq libcrc32c raid1 raid0 linear mlx4_ib md_mod ib_uverbs ib_core
> sd_mod t10_pi crc_t10dif crct10dif_generic ahci libahci
> crct10dif_pclmul crct10dif_common crc32c_intel igb libata usb_storage
> psmouse i2c_piix4 i2c_algo_bit mlx4_core dca scsi_mod i2c_core ptp
> pps_core
> [ 1333.042737] CPU: 8 PID: 559 Comm: kworker/u128:1 Tainted: G
>    O      5.10.136-pserver-develop-5.10 #257
> [ 1333.042738] Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00       09/04/2012
> [ 1333.042752] Workqueue: rdma_cm cma_work_handler [rdma_cm]
> [ 1333.042758] RIP: 0010:rtrs_clt_rdma_cm_handler+0x864/0x8a0 [rtrs_client]
> [ 1333.042761] Code: ff bb ea ff ff ff e8 db a5 24 fc 49 8d b4 24 10
> 01 00 00 89 da 48 c7 c7 40 93 5b c0 e8 4b 47 21 fc 4d 8b 65 00 e9 15
> fe ff ff <0f> 0b 4c 89 ff bb ea ff ff ff e8 ad a5 24 fc eb d0 0f 0b 4c
> 89 ff
> [ 1333.042763] RSP: 0018:ffffaff68e57bdb0 EFLAGS: 00010286
> [ 1333.042765] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9eddc0051420
> [ 1333.042767] RDX: ffff9ee4ef716e40 RSI: ffff9f14ea288f30 RDI: ffff9eddc88db240
> [ 1333.042768] RBP: ffffaff68e57be50 R08: 0000000000000000 R09: 006d635f616d6472
> [ 1333.042769] R10: ffffaff68e57be68 R11: 0000000000000000 R12: ffff9edde1388000
> [ 1333.042771] R13: ffff9eddc88db200 R14: ffff9edde1388000 R15: ffff9eddc88db240
> [ 1333.042773] FS:  0000000000000000(0000) GS:ffff9eecc7c00000(0000)
> knlGS:0000000000000000
> [ 1333.042774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 1333.042776] CR2: 00007f0ac4ed4004 CR3: 0000002b5040a000 CR4: 00000000000406e0
> [ 1333.042777] Call Trace:
> [ 1333.042790]  ? newidle_balance+0x25e/0x3c0
> [ 1333.042795]  ? psi_group_change+0x43/0x230
> [ 1333.042801]  ? cma_cm_event_handler+0x23/0xb0 [rdma_cm]
> [ 1333.042807]  cma_cm_event_handler+0x23/0xb0 [rdma_cm]
> [ 1333.042814]  cma_work_handler+0x5a/0xb0 [rdma_cm]
> [ 1333.042819]  process_one_work+0x1f3/0x390
> [ 1333.042822]  worker_thread+0x2d/0x3c0

Li Zhijian April 21, 2023, 1:38 a.m. UTC | #26

Jinpu

I updated the changes as below, and tested for thousand rounds.

 From d441c0e2496c1795b5af2b6b8ae4672203d6af3c Mon Sep 17 00:00:00 2001
From: Li Zhijian <lizhijian@fujitsu.com>
Date: Thu, 20 Apr 2023 17:28:28 +0800
Subject: [PATCH] RDMA/rtrs: Fix rxe_dealloc_pd warning

In current design:
1. PD and clt_path->s.dev are shared among connections.
2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and
    when clt_path->s.dev become zero, it will destroy PD.
4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
    but it try to decreased clt_path->s.dev

So, in case create_cm(con[0]) succeeds but create_cm(con[1])
fails, destroy_con_cq_qp(con[1]) will be called first which will destory
the PD while this PD is still taken by con[0].

Here, we refactor the error path of create_cm() and init_conns(), so that
we do the cleanup in the order they are created.

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
---
  drivers/infiniband/ulp/rtrs/rtrs-clt.c | 47 +++++++++++---------------
  1 file changed, 19 insertions(+), 28 deletions(-)

diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
index 80abf45a197a..5faf0ecb726b 100644
--- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
+++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
@@ -2040,6 +2040,7 @@ static int rtrs_clt_rdma_cm_handler(struct rdma_cm_id *cm_id,
  	return 0;
  }
  
+/* The caller should the do the cleanup in case of error */
  static int create_cm(struct rtrs_clt_con *con)
  {
  	struct rtrs_path *s = con->c.path;
@@ -2062,14 +2063,14 @@ static int create_cm(struct rtrs_clt_con *con)
  	err = rdma_set_reuseaddr(cm_id, 1);
  	if (err != 0) {
  		rtrs_err(s, "Set address reuse failed, err: %d\n", err);
-		goto destroy_cm;
+		return err;
  	}
  	err = rdma_resolve_addr(cm_id, (struct sockaddr *)&clt_path->s.src_addr,
  				(struct sockaddr *)&clt_path->s.dst_addr,
  				RTRS_CONNECT_TIMEOUT_MS);
  	if (err) {
  		rtrs_err(s, "Failed to resolve address, err: %d\n", err);
-		goto destroy_cm;
+		return err;
  	}
  	/*
  	 * Combine connection status and session events. This is needed
@@ -2084,29 +2085,17 @@ static int create_cm(struct rtrs_clt_con *con)
  		if (err == 0)
  			err = -ETIMEDOUT;
  		/* Timedout or interrupted */
-		goto errr;
+		return err;
  	}
  	if (con->cm_err < 0) {
-		err = con->cm_err;
-		goto errr;
+		return con->cm_err;
  	}
  	if (READ_ONCE(clt_path->state) != RTRS_CLT_CONNECTING) {
  		/* Device removal */
-		err = -ECONNABORTED;
-		goto errr;
+		return -ECONNABORTED;
  	}
  
  	return 0;
-
-errr:
-	stop_cm(con);
-	mutex_lock(&con->con_mutex);
-	destroy_con_cq_qp(con);
-	mutex_unlock(&con->con_mutex);
-destroy_cm:
-	destroy_cm(con);
-
-	return err;
  }
  
  static void rtrs_clt_path_up(struct rtrs_clt_path *clt_path)
@@ -2334,7 +2323,7 @@ static void rtrs_clt_close_work(struct work_struct *work)
  static int init_conns(struct rtrs_clt_path *clt_path)
  {
  	unsigned int cid;
-	int err;
+	int err, i;
  
  	/*
  	 * On every new session connections increase reconnect counter
@@ -2350,10 +2339,8 @@ static int init_conns(struct rtrs_clt_path *clt_path)
  			goto destroy;
  
  		err = create_cm(to_clt_con(clt_path->s.con[cid]));
-		if (err) {
-			destroy_con(to_clt_con(clt_path->s.con[cid]));
+		if (err)
  			goto destroy;
-		}
  	}
  	err = alloc_path_reqs(clt_path);
  	if (err)
@@ -2364,15 +2351,19 @@ static int init_conns(struct rtrs_clt_path *clt_path)
  	return 0;
  
  destroy:
-	while (cid--) {
+	/* Make sure we do the cleanup in the order they are created */
+	for (i = 0; i <= cid; i++) {
  		struct rtrs_clt_con *con = to_clt_con(clt_path->s.con[cid]);
  
-		stop_cm(con);
-
-		mutex_lock(&con->con_mutex);
-		destroy_con_cq_qp(con);
-		mutex_unlock(&con->con_mutex);
-		destroy_cm(con);
+		if (!con)
+			break;
+		if (con->c.cm_id) {
+			stop_cm(con);
+			mutex_lock(&con->con_mutex);
+			destroy_con_cq_qp(con);
+			mutex_unlock(&con->con_mutex);
+			destroy_cm(con);
+		}
  		destroy_con(con);
  	}
  	/*

Li Zhijian April 21, 2023, 6:49 a.m. UTC | #27

On 21/04/2023 09:38, Li Zhijian wrote:
> Jinpu
> 
> I updated the changes as below, and tested for thousand rounds.
> 
>  From d441c0e2496c1795b5af2b6b8ae4672203d6af3c Mon Sep 17 00:00:00 2001
> From: Li Zhijian <lizhijian@fujitsu.com>
> Date: Thu, 20 Apr 2023 17:28:28 +0800
> Subject: [PATCH] RDMA/rtrs: Fix rxe_dealloc_pd warning
> 
> In current design:
> 1. PD and clt_path->s.dev are shared among connections.
> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and
>     when clt_path->s.dev become zero, it will destroy PD.
> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
>     but it try to decreased clt_path->s.dev
> 
> So, in case create_cm(con[0]) succeeds but create_cm(con[1])
> fails, destroy_con_cq_qp(con[1]) will be called first which will destory
> the PD while this PD is still taken by con[0].
> 
> Here, we refactor the error path of create_cm() and init_conns(), so that
> we do the cleanup in the order they are created.
> 
> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> ---
>   drivers/infiniband/ulp/rtrs/rtrs-clt.c | 47 +++++++++++---------------
>   1 file changed, 19 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> index 80abf45a197a..5faf0ecb726b 100644
> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> @@ -2040,6 +2040,7 @@ static int rtrs_clt_rdma_cm_handler(struct rdma_cm_id *cm_id,
>       return 0;
>   }
> 
> +/* The caller should the do the cleanup in case of error */
>   static int create_cm(struct rtrs_clt_con *con)
>   {
>       struct rtrs_path *s = con->c.path;
> @@ -2062,14 +2063,14 @@ static int create_cm(struct rtrs_clt_con *con)
>       err = rdma_set_reuseaddr(cm_id, 1);
>       if (err != 0) {
>           rtrs_err(s, "Set address reuse failed, err: %d\n", err);
> -        goto destroy_cm;
> +        return err;
>       }
>       err = rdma_resolve_addr(cm_id, (struct sockaddr *)&clt_path->s.src_addr,
>                   (struct sockaddr *)&clt_path->s.dst_addr,
>                   RTRS_CONNECT_TIMEOUT_MS);
>       if (err) {
>           rtrs_err(s, "Failed to resolve address, err: %d\n", err);
> -        goto destroy_cm;
> +        return err;
>       }
>       /*
>        * Combine connection status and session events. This is needed
> @@ -2084,29 +2085,17 @@ static int create_cm(struct rtrs_clt_con *con)
>           if (err == 0)
>               err = -ETIMEDOUT;
>           /* Timedout or interrupted */
> -        goto errr;
> +        return err;
>       }
>       if (con->cm_err < 0) {
> -        err = con->cm_err;
> -        goto errr;
> +        return con->cm_err;
>       }
>       if (READ_ONCE(clt_path->state) != RTRS_CLT_CONNECTING) {
>           /* Device removal */
> -        err = -ECONNABORTED;
> -        goto errr;
> +        return -ECONNABORTED;
>       }
> 
>       return 0;
> -
> -errr:
> -    stop_cm(con);
> -    mutex_lock(&con->con_mutex);
> -    destroy_con_cq_qp(con);
> -    mutex_unlock(&con->con_mutex);
> -destroy_cm:
> -    destroy_cm(con);
> -
> -    return err;
>   }
> 
>   static void rtrs_clt_path_up(struct rtrs_clt_path *clt_path)
> @@ -2334,7 +2323,7 @@ static void rtrs_clt_close_work(struct work_struct *work)
>   static int init_conns(struct rtrs_clt_path *clt_path)
>   {
>       unsigned int cid;
> -    int err;
> +    int err, i;
> 
>       /*
>        * On every new session connections increase reconnect counter
> @@ -2350,10 +2339,8 @@ static int init_conns(struct rtrs_clt_path *clt_path)
>               goto destroy;
> 
>           err = create_cm(to_clt_con(clt_path->s.con[cid]));
> -        if (err) {
> -            destroy_con(to_clt_con(clt_path->s.con[cid]));
> +        if (err)
>               goto destroy;
> -        }
>       }
>       err = alloc_path_reqs(clt_path);
>       if (err)
> @@ -2364,15 +2351,19 @@ static int init_conns(struct rtrs_clt_path *clt_path)
>       return 0;
> 
>   destroy:
> -    while (cid--) {
> +    /* Make sure we do the cleanup in the order they are created */
> +    for (i = 0; i <= cid; i++) {
>           struct rtrs_clt_con *con = to_clt_con(clt_path->s.con[cid]);


s/cid/i


> 
> -        stop_cm(con);
> -
> -        mutex_lock(&con->con_mutex);
> -        destroy_con_cq_qp(con);
> -        mutex_unlock(&con->con_mutex);
> -        destroy_cm(con);
> +        if (!con)
> +            break;
> +        if (con->c.cm_id) {
> +            stop_cm(con);
> +            mutex_lock(&con->con_mutex);
> +            destroy_con_cq_qp(con);
> +            mutex_unlock(&con->con_mutex);
> +            destroy_cm(con);
> +        }
>           destroy_con(con);
>       }
>       /*

Jinpu Wang April 21, 2023, 7:05 a.m. UTC | #28

On Fri, Apr 21, 2023 at 3:38 AM Zhijian Li (Fujitsu)
<lizhijian@fujitsu.com> wrote:
>
> Jinpu
>
> I updated the changes as below, and tested for thousand rounds.
>
>  From d441c0e2496c1795b5af2b6b8ae4672203d6af3c Mon Sep 17 00:00:00 2001
> From: Li Zhijian <lizhijian@fujitsu.com>
> Date: Thu, 20 Apr 2023 17:28:28 +0800
> Subject: [PATCH] RDMA/rtrs: Fix rxe_dealloc_pd warning
>
> In current design:
> 1. PD and clt_path->s.dev are shared among connections.
> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and
>     when clt_path->s.dev become zero, it will destroy PD.
> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
>     but it try to decreased clt_path->s.dev
>
> So, in case create_cm(con[0]) succeeds but create_cm(con[1])
> fails, destroy_con_cq_qp(con[1]) will be called first which will destory
> the PD while this PD is still taken by con[0].
>
> Here, we refactor the error path of create_cm() and init_conns(), so that
> we do the cleanup in the order they are created.
>
> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> ---
>   drivers/infiniband/ulp/rtrs/rtrs-clt.c | 47 +++++++++++---------------
>   1 file changed, 19 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> index 80abf45a197a..5faf0ecb726b 100644
> --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c
> @@ -2040,6 +2040,7 @@ static int rtrs_clt_rdma_cm_handler(struct rdma_cm_id *cm_id,
>         return 0;
>   }
>
> +/* The caller should the do the cleanup in case of error */
>   static int create_cm(struct rtrs_clt_con *con)
>   {
>         struct rtrs_path *s = con->c.path;
> @@ -2062,14 +2063,14 @@ static int create_cm(struct rtrs_clt_con *con)
>         err = rdma_set_reuseaddr(cm_id, 1);
>         if (err != 0) {
>                 rtrs_err(s, "Set address reuse failed, err: %d\n", err);
> -               goto destroy_cm;
> +               return err;
>         }
>         err = rdma_resolve_addr(cm_id, (struct sockaddr *)&clt_path->s.src_addr,
>                                 (struct sockaddr *)&clt_path->s.dst_addr,
>                                 RTRS_CONNECT_TIMEOUT_MS);
>         if (err) {
>                 rtrs_err(s, "Failed to resolve address, err: %d\n", err);
> -               goto destroy_cm;
> +               return err;
>         }
>         /*
>          * Combine connection status and session events. This is needed
> @@ -2084,29 +2085,17 @@ static int create_cm(struct rtrs_clt_con *con)
>                 if (err == 0)
>                         err = -ETIMEDOUT;
>                 /* Timedout or interrupted */
> -               goto errr;
> +               return err;
>         }
>         if (con->cm_err < 0) {
> -               err = con->cm_err;
> -               goto errr;
> +               return con->cm_err;
>         }
The bracket can be removed too
>         if (READ_ONCE(clt_path->state) != RTRS_CLT_CONNECTING) {
>                 /* Device removal */
> -               err = -ECONNABORTED;
> -               goto errr;
> +               return -ECONNABORTED;
>         }
same here.
>
>         return 0;
> -
> -errr:
> -       stop_cm(con);
> -       mutex_lock(&con->con_mutex);
> -       destroy_con_cq_qp(con);
> -       mutex_unlock(&con->con_mutex);
> -destroy_cm:
> -       destroy_cm(con);
> -
> -       return err;
>   }
>
>   static void rtrs_clt_path_up(struct rtrs_clt_path *clt_path)
> @@ -2334,7 +2323,7 @@ static void rtrs_clt_close_work(struct work_struct *work)
>   static int init_conns(struct rtrs_clt_path *clt_path)
>   {
>         unsigned int cid;
> -       int err;
> +       int err, i;
>
>         /*
>          * On every new session connections increase reconnect counter
> @@ -2350,10 +2339,8 @@ static int init_conns(struct rtrs_clt_path *clt_path)
>                         goto destroy;
>
>                 err = create_cm(to_clt_con(clt_path->s.con[cid]));
> -               if (err) {
> -                       destroy_con(to_clt_con(clt_path->s.con[cid]));
> +               if (err)
>                         goto destroy;
> -               }
>         }
>         err = alloc_path_reqs(clt_path);
>         if (err)
> @@ -2364,15 +2351,19 @@ static int init_conns(struct rtrs_clt_path *clt_path)
>         return 0;
>
>   destroy:
> -       while (cid--) {
> +       /* Make sure we do the cleanup in the order they are created */
> +       for (i = 0; i <= cid; i++) {
>                 struct rtrs_clt_con *con = to_clt_con(clt_path->s.con[cid]);
Yes, this line has to be adapted.
                   struct rtrs_clt_con *con = to_clt_con(clt_path->s.con[i]);
>
> -               stop_cm(con);
> -
> -               mutex_lock(&con->con_mutex);
> -               destroy_con_cq_qp(con);
> -               mutex_unlock(&con->con_mutex);
> -               destroy_cm(con);
> +               if (!con)
> +                       break;
> +               if (con->c.cm_id) {
> +                       stop_cm(con);
> +                       mutex_lock(&con->con_mutex);
> +                       destroy_con_cq_qp(con);
> +                       mutex_unlock(&con->con_mutex);
> +                       destroy_cm(con);
> +               }
>                 destroy_con(con);
>         }
>         /*
> --
> 2.29.2
>
This version looks fine. I will run some tests.

Thx!
>
>
> On 20/04/2023 10:00, Li Zhijian wrote:
> > On 19/04/2023 21:20, Jinpu Wang wrote:
> >> On Wed, Apr 19, 2023 at 11:53 AM Zhijian Li (Fujitsu)
> >> <lizhijian@fujitsu.com> wrote:
> >>>
> >>> Leon, Guoqing
> >>>
> >>>
> >>> On 18/04/2023 15:57, Leon Romanovsky wrote:
> >>>>>>> Currently, without this patch:
> >>>>>>> 1. PD and clt_path->s.dev are shared among connections.
> >>>>>>> 2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
> >>>>>>> 3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and when
> >>>>>>>        clt_path->s.dev become zero, it will destroy PD.
> >>>>>>> 4. when con[1] failed to create, con[1] will not take clt_path->s.dev, but it try to decreased clt_path->s.dev <<< it's wrong to do that.
> >>>>>> So please fix it by making sure that failure to create con[1] will
> >>>>>> release resources which were allocated. If con[1] didn't increase
> >>>>>> s.dev_ref, it shouldn't decrease it either.
> >>>>> You are right, the current patch did exactly that.
> >>>>> It introduced a con owning flag 'has_dev' to indicate whether this con has taken s.dev.
> >>>>> so that its cleanup phase will only decrease its s.dev properly.
> >>>> The has_dev is a workaround and not a solution. In proper error unwind
> >>>> sequence, you won't need extra flag.

[for-next,2/3] RDMA/rtrs: Fix rxe_dealloc_pd warning

Commit Message

Comments

Patch