| Message ID | 20230414051349.1986744-3-mcgrof@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | modules/kmod: replace implementation with a sempahore | expand |
On Thu, 13 Apr 2023, Luis Chamberlain wrote: > Simplify the concurrency delimiter we use for kmod with the semaphore. > I had used the kmod strategy to try to implement a similar concurrency > delimiter for the kernel_read*() calls from the finit_module() path > so to reduce vmalloc() memory pressure. That effort didn't provide yet > conclusive results, but one thing that became clear is we can use > the suggested alternative solution with semaphores which Linus hinted > at instead of using the atomic / wait strategy. > > I've stress tested this with kmod test 0008: > > time /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 > > And I get only a *slight* delay. That delay however is small, a few > seconds for a full test loop run that runs 150 times, for about ~30-40 > seconds. The small delay is worth the simplfication IMHO. > > Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> M
On 14.04.23 07:13, Luis Chamberlain wrote: > Simplify the concurrency delimiter we use for kmod with the semaphore. > I had used the kmod strategy to try to implement a similar concurrency > delimiter for the kernel_read*() calls from the finit_module() path > so to reduce vmalloc() memory pressure. That effort didn't provide yet > conclusive results, but one thing that became clear is we can use > the suggested alternative solution with semaphores which Linus hinted > at instead of using the atomic / wait strategy. > > I've stress tested this with kmod test 0008: > > time /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 > > And I get only a *slight* delay. That delay however is small, a few > seconds for a full test loop run that runs 150 times, for about ~30-40 > seconds. The small delay is worth the simplfication IMHO. > > Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> > --- > kernel/module/kmod.c | 26 +++++++------------------- > 1 file changed, 7 insertions(+), 19 deletions(-) > > diff --git a/kernel/module/kmod.c b/kernel/module/kmod.c > index b717134ebe17..5899083436a3 100644 > --- a/kernel/module/kmod.c > +++ b/kernel/module/kmod.c > @@ -40,8 +40,7 @@ > * effect. Systems like these are very unlikely if modules are enabled. > */ > #define MAX_KMOD_CONCURRENT 50 > -static atomic_t kmod_concurrent_max = ATOMIC_INIT(MAX_KMOD_CONCURRENT); > -static DECLARE_WAIT_QUEUE_HEAD(kmod_wq); > +static DEFINE_SEMAPHORE(kmod_concurrent_max, MAX_KMOD_CONCURRENT); > > /* > * This is a restriction on having *all* MAX_KMOD_CONCURRENT threads > @@ -148,29 +147,18 @@ int __request_module(bool wait, const char *fmt, ...) > if (ret) > return ret; > > - if (atomic_dec_if_positive(&kmod_concurrent_max) < 0) { > - pr_warn_ratelimited("request_module: kmod_concurrent_max (%u) close to 0 (max_modprobes: %u), for module %s, throttling...", > - atomic_read(&kmod_concurrent_max), > - MAX_KMOD_CONCURRENT, module_name); > - ret = wait_event_killable_timeout(kmod_wq, > - atomic_dec_if_positive(&kmod_concurrent_max) >= 0, > - MAX_KMOD_ALL_BUSY_TIMEOUT * HZ); > - if (!ret) { > - pr_warn_ratelimited("request_module: modprobe %s cannot be processed, kmod busy with %d threads for more than %d seconds now", > - module_name, MAX_KMOD_CONCURRENT, MAX_KMOD_ALL_BUSY_TIMEOUT); > - return -ETIME; > - } else if (ret == -ERESTARTSYS) { > - pr_warn_ratelimited("request_module: sigkill sent for modprobe %s, giving up", module_name); > - return ret; > - } > + ret = down_timeout(&kmod_concurrent_max, MAX_KMOD_ALL_BUSY_TIMEOUT * HZ); > + if (ret) { > + pr_warn_ratelimited("request_module: modprobe %s cannot be processed, kmod busy with %d threads for more than %d seconds now", > + module_name, MAX_KMOD_CONCURRENT, MAX_KMOD_ALL_BUSY_TIMEOUT); > + return ret; > } > > trace_module_request(module_name, wait, _RET_IP_); > > ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC); > > - atomic_inc(&kmod_concurrent_max); > - wake_up(&kmod_wq); > + up(&kmod_concurrent_max); > > return ret; > } Reviewed-by: David Hildenbrand <david@redhat.com>
diff --git a/kernel/module/kmod.c b/kernel/module/kmod.c index b717134ebe17..5899083436a3 100644 --- a/kernel/module/kmod.c +++ b/kernel/module/kmod.c @@ -40,8 +40,7 @@ * effect. Systems like these are very unlikely if modules are enabled. */ #define MAX_KMOD_CONCURRENT 50 -static atomic_t kmod_concurrent_max = ATOMIC_INIT(MAX_KMOD_CONCURRENT); -static DECLARE_WAIT_QUEUE_HEAD(kmod_wq); +static DEFINE_SEMAPHORE(kmod_concurrent_max, MAX_KMOD_CONCURRENT); /* * This is a restriction on having *all* MAX_KMOD_CONCURRENT threads @@ -148,29 +147,18 @@ int __request_module(bool wait, const char *fmt, ...) if (ret) return ret; - if (atomic_dec_if_positive(&kmod_concurrent_max) < 0) { - pr_warn_ratelimited("request_module: kmod_concurrent_max (%u) close to 0 (max_modprobes: %u), for module %s, throttling...", - atomic_read(&kmod_concurrent_max), - MAX_KMOD_CONCURRENT, module_name); - ret = wait_event_killable_timeout(kmod_wq, - atomic_dec_if_positive(&kmod_concurrent_max) >= 0, - MAX_KMOD_ALL_BUSY_TIMEOUT * HZ); - if (!ret) { - pr_warn_ratelimited("request_module: modprobe %s cannot be processed, kmod busy with %d threads for more than %d seconds now", - module_name, MAX_KMOD_CONCURRENT, MAX_KMOD_ALL_BUSY_TIMEOUT); - return -ETIME; - } else if (ret == -ERESTARTSYS) { - pr_warn_ratelimited("request_module: sigkill sent for modprobe %s, giving up", module_name); - return ret; - } + ret = down_timeout(&kmod_concurrent_max, MAX_KMOD_ALL_BUSY_TIMEOUT * HZ); + if (ret) { + pr_warn_ratelimited("request_module: modprobe %s cannot be processed, kmod busy with %d threads for more than %d seconds now", + module_name, MAX_KMOD_CONCURRENT, MAX_KMOD_ALL_BUSY_TIMEOUT); + return ret; } trace_module_request(module_name, wait, _RET_IP_); ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC); - atomic_inc(&kmod_concurrent_max); - wake_up(&kmod_wq); + up(&kmod_concurrent_max); return ret; }
Simplify the concurrency delimiter we use for kmod with the semaphore. I had used the kmod strategy to try to implement a similar concurrency delimiter for the kernel_read*() calls from the finit_module() path so to reduce vmalloc() memory pressure. That effort didn't provide yet conclusive results, but one thing that became clear is we can use the suggested alternative solution with semaphores which Linus hinted at instead of using the atomic / wait strategy. I've stress tested this with kmod test 0008: time /data/linux-next/tools/testing/selftests/kmod/kmod.sh -t 0008 And I get only a *slight* delay. That delay however is small, a few seconds for a full test loop run that runs 150 times, for about ~30-40 seconds. The small delay is worth the simplfication IMHO. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> --- kernel/module/kmod.c | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-)