@@ -12,6 +12,9 @@
#include <xen/errno.h>
#include <xen/init.h>
#include <xen/lib.h>
+#include <xen/iocap.h>
+#include <asm/domain_build.h>
+#include <asm/setup.h>
extern const struct device_desc _sdevice[], _edevice[];
extern const struct acpi_device_desc _asdevice[], _aedevice[];
@@ -75,6 +78,148 @@ enum device_class device_get_class(const struct dt_device_node *dev)
return DEVICE_UNKNOWN;
}
+int map_irq_to_domain(struct domain *d, unsigned int irq,
+ bool need_mapping, const char *devname)
+{
+ int res;
+
+ res = irq_permit_access(d, irq);
+ if ( res )
+ {
+ printk(XENLOG_ERR "Unable to permit to dom%u access to IRQ %u\n",
+ d->domain_id, irq);
+ return res;
+ }
+
+ if ( need_mapping )
+ {
+ /*
+ * Checking the return of vgic_reserve_virq is not
+ * necessary. It should not fail except when we try to map
+ * the IRQ twice. This can legitimately happen if the IRQ is shared
+ */
+ vgic_reserve_virq(d, irq);
+
+ res = route_irq_to_guest(d, irq, irq, devname);
+ if ( res < 0 )
+ {
+ printk(XENLOG_ERR "Unable to map IRQ%"PRId32" to dom%d\n",
+ irq, d->domain_id);
+ return res;
+ }
+ }
+
+ dt_dprintk(" - IRQ: %u\n", irq);
+ return 0;
+}
+
+int map_range_to_domain(const struct dt_device_node *dev,
+ u64 addr, u64 len, void *data)
+{
+ struct map_range_data *mr_data = data;
+ struct domain *d = mr_data->d;
+ int res;
+
+ /*
+ * reserved-memory regions are RAM carved out for a special purpose.
+ * They are not MMIO and therefore a domain should not be able to
+ * manage them via the IOMEM interface.
+ */
+ if ( strncasecmp(dt_node_full_name(dev), "/reserved-memory/",
+ strlen("/reserved-memory/")) != 0 )
+ {
+ res = iomem_permit_access(d, paddr_to_pfn(addr),
+ paddr_to_pfn(PAGE_ALIGN(addr + len - 1)));
+ if ( res )
+ {
+ printk(XENLOG_ERR "Unable to permit to dom%d access to"
+ " 0x%"PRIx64" - 0x%"PRIx64"\n",
+ d->domain_id,
+ addr & PAGE_MASK, PAGE_ALIGN(addr + len) - 1);
+ return res;
+ }
+ }
+
+ if ( !mr_data->skip_mapping )
+ {
+ res = map_regions_p2mt(d,
+ gaddr_to_gfn(addr),
+ PFN_UP(len),
+ maddr_to_mfn(addr),
+ mr_data->p2mt);
+
+ if ( res < 0 )
+ {
+ printk(XENLOG_ERR "Unable to map 0x%"PRIx64
+ " - 0x%"PRIx64" in domain %d\n",
+ addr & PAGE_MASK, PAGE_ALIGN(addr + len) - 1,
+ d->domain_id);
+ return res;
+ }
+ }
+
+ dt_dprintk(" - MMIO: %010"PRIx64" - %010"PRIx64" P2MType=%x\n",
+ addr, addr + len, mr_data->p2mt);
+
+ return 0;
+}
+
+/*
+ * handle_device_interrupts retrieves the interrupts configuration from
+ * a device tree node and maps those interrupts to the target domain.
+ *
+ * Returns:
+ * < 0 error
+ * 0 success
+ */
+int handle_device_interrupts(struct domain *d,
+ struct dt_device_node *dev,
+ bool need_mapping)
+{
+ unsigned int i, nirq;
+ int res;
+ struct dt_raw_irq rirq;
+
+ nirq = dt_number_of_irq(dev);
+
+ /* Give permission and map IRQs */
+ for ( i = 0; i < nirq; i++ )
+ {
+ res = dt_device_get_raw_irq(dev, i, &rirq);
+ if ( res )
+ {
+ printk(XENLOG_ERR "Unable to retrieve irq %u for %s\n",
+ i, dt_node_full_name(dev));
+ return res;
+ }
+
+ /*
+ * Don't map IRQ that have no physical meaning
+ * ie: IRQ whose controller is not the GIC
+ */
+ if ( rirq.controller != dt_interrupt_controller )
+ {
+ dt_dprintk("irq %u not connected to primary controller. Connected to %s\n",
+ i, dt_node_full_name(rirq.controller));
+ continue;
+ }
+
+ res = platform_get_irq(dev, i);
+ if ( res < 0 )
+ {
+ printk(XENLOG_ERR "Unable to get irq %u for %s\n",
+ i, dt_node_full_name(dev));
+ return res;
+ }
+
+ res = map_irq_to_domain(d, res, need_mapping, dt_node_name(dev));
+ if ( res )
+ return res;
+ }
+
+ return 0;
+}
+
/*
* Local variables:
* mode: C
@@ -2256,41 +2256,6 @@ int __init make_chosen_node(const struct kernel_info *kinfo)
return res;
}
-int __init map_irq_to_domain(struct domain *d, unsigned int irq,
- bool need_mapping, const char *devname)
-{
- int res;
-
- res = irq_permit_access(d, irq);
- if ( res )
- {
- printk(XENLOG_ERR "Unable to permit to dom%u access to IRQ %u\n",
- d->domain_id, irq);
- return res;
- }
-
- if ( need_mapping )
- {
- /*
- * Checking the return of vgic_reserve_virq is not
- * necessary. It should not fail except when we try to map
- * the IRQ twice. This can legitimately happen if the IRQ is shared
- */
- vgic_reserve_virq(d, irq);
-
- res = route_irq_to_guest(d, irq, irq, devname);
- if ( res < 0 )
- {
- printk(XENLOG_ERR "Unable to map IRQ%"PRId32" to dom%d\n",
- irq, d->domain_id);
- return res;
- }
- }
-
- dt_dprintk(" - IRQ: %u\n", irq);
- return 0;
-}
-
static int __init map_dt_irq_to_domain(const struct dt_device_node *dev,
const struct dt_irq *dt_irq,
void *data)
@@ -2322,57 +2287,6 @@ static int __init map_dt_irq_to_domain(const struct dt_device_node *dev,
return 0;
}
-int __init map_range_to_domain(const struct dt_device_node *dev,
- u64 addr, u64 len, void *data)
-{
- struct map_range_data *mr_data = data;
- struct domain *d = mr_data->d;
- int res;
-
- /*
- * reserved-memory regions are RAM carved out for a special purpose.
- * They are not MMIO and therefore a domain should not be able to
- * manage them via the IOMEM interface.
- */
- if ( strncasecmp(dt_node_full_name(dev), "/reserved-memory/",
- strlen("/reserved-memory/")) != 0 )
- {
- res = iomem_permit_access(d, paddr_to_pfn(addr),
- paddr_to_pfn(PAGE_ALIGN(addr + len - 1)));
- if ( res )
- {
- printk(XENLOG_ERR "Unable to permit to dom%d access to"
- " 0x%"PRIx64" - 0x%"PRIx64"\n",
- d->domain_id,
- addr & PAGE_MASK, PAGE_ALIGN(addr + len) - 1);
- return res;
- }
- }
-
- if ( !mr_data->skip_mapping )
- {
- res = map_regions_p2mt(d,
- gaddr_to_gfn(addr),
- PFN_UP(len),
- maddr_to_mfn(addr),
- mr_data->p2mt);
-
- if ( res < 0 )
- {
- printk(XENLOG_ERR "Unable to map 0x%"PRIx64
- " - 0x%"PRIx64" in domain %d\n",
- addr & PAGE_MASK, PAGE_ALIGN(addr + len) - 1,
- d->domain_id);
- return res;
- }
- }
-
- dt_dprintk(" - MMIO: %010"PRIx64" - %010"PRIx64" P2MType=%x\n",
- addr, addr + len, mr_data->p2mt);
-
- return 0;
-}
-
/*
* For a node which describes a discoverable bus (such as a PCI bus)
* then we may need to perform additional mappings in order to make
@@ -2400,62 +2314,6 @@ static int __init map_device_children(const struct dt_device_node *dev,
return 0;
}
-/*
- * handle_device_interrupts retrieves the interrupts configuration from
- * a device tree node and maps those interrupts to the target domain.
- *
- * Returns:
- * < 0 error
- * 0 success
- */
-static int __init handle_device_interrupts(struct domain *d,
- struct dt_device_node *dev,
- bool need_mapping)
-{
- unsigned int i, nirq;
- int res;
- struct dt_raw_irq rirq;
-
- nirq = dt_number_of_irq(dev);
-
- /* Give permission and map IRQs */
- for ( i = 0; i < nirq; i++ )
- {
- res = dt_device_get_raw_irq(dev, i, &rirq);
- if ( res )
- {
- printk(XENLOG_ERR "Unable to retrieve irq %u for %s\n",
- i, dt_node_full_name(dev));
- return res;
- }
-
- /*
- * Don't map IRQ that have no physical meaning
- * ie: IRQ whose controller is not the GIC
- */
- if ( rirq.controller != dt_interrupt_controller )
- {
- dt_dprintk("irq %u not connected to primary controller. Connected to %s\n",
- i, dt_node_full_name(rirq.controller));
- continue;
- }
-
- res = platform_get_irq(dev, i);
- if ( res < 0 )
- {
- printk(XENLOG_ERR "Unable to get irq %u for %s\n",
- i, dt_node_full_name(dev));
- return res;
- }
-
- res = map_irq_to_domain(d, res, need_mapping, dt_node_name(dev));
- if ( res )
- return res;
- }
-
- return 0;
-}
-
/*
* For a given device node:
* - Give permission to the guest to manage IRQ and MMIO range
@@ -4,8 +4,6 @@
#include <xen/sched.h>
#include <asm/kernel.h>
-int map_irq_to_domain(struct domain *d, unsigned int irq,
- bool need_mapping, const char *devname);
int make_chosen_node(const struct kernel_info *kinfo);
void evtchn_allocate(struct domain *d);
@@ -163,9 +163,15 @@ void device_tree_get_reg(const __be32 **cell, u32 address_cells,
u32 device_tree_get_u32(const void *fdt, int node,
const char *prop_name, u32 dflt);
+int handle_device_interrupts(struct domain *d, struct dt_device_node *dev,
+ bool need_mapping);
+
int map_range_to_domain(const struct dt_device_node *dev,
u64 addr, u64 len, void *data);
+int map_irq_to_domain(struct domain *d, unsigned int irq,
+ bool need_mapping, const char *devname);
+
extern const char __ro_after_init_start[], __ro_after_init_end[];
struct init_info
@@ -1811,12 +1811,12 @@ int dt_count_phandle_with_args(const struct dt_device_node *np,
* @allnextpp: pointer to ->allnext from last allocated device_node
* @fpsize: Size of the node path up at the current depth.
*/
-static unsigned long __init unflatten_dt_node(const void *fdt,
- unsigned long mem,
- unsigned long *p,
- struct dt_device_node *dad,
- struct dt_device_node ***allnextpp,
- unsigned long fpsize)
+static unsigned long unflatten_dt_node(const void *fdt,
+ unsigned long mem,
+ unsigned long *p,
+ struct dt_device_node *dad,
+ struct dt_device_node ***allnextpp,
+ unsigned long fpsize)
{
struct dt_device_node *np;
struct dt_property *pp, **prev_pp = NULL;
@@ -2056,8 +2056,8 @@ static unsigned long __init unflatten_dt_node(const void *fdt,
* @fdt: The fdt to expand
* @mynodes: The device_node tree created by the call
*/
-static void __init __unflatten_device_tree(const void *fdt,
- struct dt_device_node **mynodes)
+static void __unflatten_device_tree(const void *fdt,
+ struct dt_device_node **mynodes)
{
unsigned long start, mem, size;
struct dt_device_node **allnextp = mynodes;
Remove __init from following function to access during runtime: 1. map_irq_to_domain() 2. handle_device_interrupt() 3. map_range_to_domain() 4. unflatten_dt_node() 5. unflatten_device_tree() Move map_irq_to_domain() prototype from domain_build.h to setup.h. To avoid the breaking the build, following changes are also done: 1. Move map_irq_to_domain(), handle_device_interrupt() and map_range_to_domain() to device.c. After removing __init type, these functions are not specific to domain building, so moving them out of domain_build.c to device.c. 2. Remove static type from handle_device_interrupt(). Overall, these changes are done to support the dynamic programming of a nodes where an overlay node will be added to fdt and unflattened node will be added to dt_host. Furthermore, IRQ and mmio mapping will be done for the added node. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> --- xen/arch/arm/device.c | 145 ++++++++++++++++++++++++ xen/arch/arm/domain_build.c | 142 ----------------------- xen/arch/arm/include/asm/domain_build.h | 2 - xen/arch/arm/include/asm/setup.h | 6 + xen/common/device_tree.c | 16 +-- 5 files changed, 159 insertions(+), 152 deletions(-)