| Message ID | 20230420113653.1686-1-quic_rajkbhag@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ath11k: factory test mode support | expand |
On 4/20/2023 5:06 PM, Raj Kumar Bhagat wrote: > Device is booted in factory test mode to calibrate the board. > The commands are sent from a userspace application, which is > sent to firmware using wmi commands. Firmware will send the > response back to the application which stores the calibration > data in caldata.bin file. This file will be loaded when the > device boots up normally next time. > > Govindaraj Saminathan (3): > wifi: ath11k: remove unused function ath11k_tm_event_wmi > wifi: ath11k: optimize ath11k_tm_cmd_get_version > wifi: ath11k: factory test mode support > > Sowmiya Sree Elavalagan (1): > wifi: ath11k: Allow ath11k to boot without caldata in ftm mode > > --- > v2: > - added separate patch for removal of ath11k_tm_event_wmi() > - added separate patch for changes in ath11k_tm_cmd_get_version() > - removed unused cmd and updated documentation for enum ath11k_tm_cmd > - changed warning print to debug print > --- > > drivers/net/wireless/ath/ath11k/ahb.c | 3 +- > drivers/net/wireless/ath/ath11k/core.c | 20 +- > drivers/net/wireless/ath/ath11k/core.h | 15 +- > drivers/net/wireless/ath/ath11k/mac.c | 13 +- > drivers/net/wireless/ath/ath11k/pci.c | 3 +- > drivers/net/wireless/ath/ath11k/qmi.c | 10 +- > drivers/net/wireless/ath/ath11k/testmode.c | 320 ++++++++++++++++--- > drivers/net/wireless/ath/ath11k/testmode.h | 20 +- > drivers/net/wireless/ath/ath11k/testmode_i.h | 16 + > drivers/net/wireless/ath/ath11k/wmi.c | 40 ++- > drivers/net/wireless/ath/ath11k/wmi.h | 20 ++ > drivers/net/wireless/ath/ath11k/wow.c | 3 +- > 12 files changed, 419 insertions(+), 64 deletions(-) > > > base-commit: 12f167f02a1abe2c8817496a902de00758285b92 Please ignore this patch series. Tested-on tag is missing for patches 1/4 and 2/4. Will send v3 with correct Tested-on tag. Thanks, Raj
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes: > On 4/20/2023 5:06 PM, Raj Kumar Bhagat wrote: > >> Device is booted in factory test mode to calibrate the board. >> The commands are sent from a userspace application, which is >> sent to firmware using wmi commands. Firmware will send the >> response back to the application which stores the calibration >> data in caldata.bin file. This file will be loaded when the >> device boots up normally next time. >> >> Govindaraj Saminathan (3): >> wifi: ath11k: remove unused function ath11k_tm_event_wmi >> wifi: ath11k: optimize ath11k_tm_cmd_get_version >> wifi: ath11k: factory test mode support >> >> Sowmiya Sree Elavalagan (1): >> wifi: ath11k: Allow ath11k to boot without caldata in ftm mode >> >> --- >> v2: >> - added separate patch for removal of ath11k_tm_event_wmi() >> - added separate patch for changes in ath11k_tm_cmd_get_version() >> - removed unused cmd and updated documentation for enum ath11k_tm_cmd >> - changed warning print to debug print >> --- >> >> drivers/net/wireless/ath/ath11k/ahb.c | 3 +- >> drivers/net/wireless/ath/ath11k/core.c | 20 +- >> drivers/net/wireless/ath/ath11k/core.h | 15 +- >> drivers/net/wireless/ath/ath11k/mac.c | 13 +- >> drivers/net/wireless/ath/ath11k/pci.c | 3 +- >> drivers/net/wireless/ath/ath11k/qmi.c | 10 +- >> drivers/net/wireless/ath/ath11k/testmode.c | 320 ++++++++++++++++--- >> drivers/net/wireless/ath/ath11k/testmode.h | 20 +- >> drivers/net/wireless/ath/ath11k/testmode_i.h | 16 + >> drivers/net/wireless/ath/ath11k/wmi.c | 40 ++- >> drivers/net/wireless/ath/ath11k/wmi.h | 20 ++ >> drivers/net/wireless/ath/ath11k/wow.c | 3 +- >> 12 files changed, 419 insertions(+), 64 deletions(-) >> >> >> base-commit: 12f167f02a1abe2c8817496a902de00758285b92 > > Please ignore this patch series. Tested-on tag is missing for patches 1/4 and > 2/4. Will send v3 with correct Tested-on tag. Please wait, I need to first push back my changes to the pending so that you can see them.