diff mbox series

[3/3] arm64: dts: qcom: pm8953: add GPIOs

Message ID 20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz (mailing list archive)
State Accepted
Headers show
Series Add GPIO support to PM8953 PMIC | expand

Commit Message

Luca Weiss April 21, 2023, 9:56 p.m. UTC 
Add a node for the GPIOs found on the pm8953.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm64/boot/dts/qcom/pm8953.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Konrad Dybcio April 22, 2023, 9:56 a.m. UTC | #1 
On 21.04.2023 23:56, Luca Weiss wrote:
> Add a node for the GPIOs found on the pm8953.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8953.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> index a1d36f9ebbd2..2268daf27fa7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> @@ -79,6 +79,16 @@ rtc@6000 {
>  			reg-names = "rtc", "alarm";
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
> +
> +		pm8953_gpios: gpio@c000 {
> +			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			gpio-ranges = <&pm8953_gpios 0 0 8>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmic@1 {
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
index a1d36f9ebbd2..2268daf27fa7 100644
--- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
@@ -79,6 +79,16 @@  rtc@6000 {
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
+
+		pm8953_gpios: gpio@c000 {
+			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8953_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmic@1 {