[v13,4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver

Message ID	20230405195927.13487-5-ddrokosov@sberdevices.ru (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Dmitry Rokosov <ddrokosov@sberdevices.ru> To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>, <mturquette@baylibre.com>, <sboyd@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <khilman@baylibre.com>, <martin.blumenstingl@googlemail.com> CC: <jian.hu@amlogic.com>, <kernel@sberdevices.ru>, <rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>, <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, Dmitry Rokosov <ddrokosov@sberdevices.ru> Subject: [PATCH v13 4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver Date: Wed, 5 Apr 2023 22:59:25 +0300 Message-ID: <20230405195927.13487-5-ddrokosov@sberdevices.ru> In-Reply-To: <20230405195927.13487-1-ddrokosov@sberdevices.ru> References: <20230405195927.13487-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 bases: 2023/04/05 16:44:00 #21035356 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	add Amlogic A1 clock controller drivers \| expand [v13,0/6] add Amlogic A1 clock controller drivers [v13,1/6] clk: meson: make pll rst bit as optional [v13,2/6] clk: meson: introduce new pll power-on sequence for A1 SoC family [v13,3/6] dt-bindings: clock: meson: add A1 PLL clock controller bindings [v13,4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver [v13,5/6] dt-bindings: clock: meson: add A1 Peripherals clock controller bindings [v13,6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..f56da2a4b000 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -99,6 +99,16 @@ config COMMON_CLK_AXG_AUDIO Support for the audio clock controller on AmLogic A113D devices, aka axg, Say Y if you want audio subsystem to work. +config COMMON_CLK_A1_PLL + tristate "Meson A1 SoC PLL controller support" + depends on ARM64 + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + help + Support for the PLL clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 PLL clock controller + to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..2f17f475a48f 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c new file mode 100644 index 000000000000..f7ab11dcf2bc --- /dev/null +++ b/drivers/clk/meson/a1-pll.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu <jian.hu@amlogic.com> + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include "a1-pll.h" +#include "clk-regmap.h" + +static struct clk_regmap fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_STS, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fixpll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixed_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixed_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range hifi_pll_mult_range = { + .min = 32, + .max = 64, +}; + +static const struct reg_sequence hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18000 }, +}; + +static struct clk_regmap hifi_pll = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_STS, + .shift = 31, + .width = 1, + }, + .current_en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 26, + .width = 1, + }, + .l_detect = { + .reg_off = ANACTRL_HIFIPLL_CTRL2, + .shift = 6, + .width = 1, + }, + .range = &hifi_pll_mult_range, + .init_regs = hifi_init_regs, + .init_count = ARRAY_SIZE(hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &meson_clk_pll_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "hifipll_in", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_div.hw + }, + .num_parents = 1, + /* + * This clock is used by DDR clock in BL2 firmware + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div3_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div5_div.hw + }, + .num_parents = 1, + /* + * This clock is used by AXI bus which setted in Romcode + * and is required by the platform to operate correctly. + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +/* Array of all clocks registered by this provider */ +static struct clk_hw_onecell_data a1_pll_clks = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &fclk_div2_div.hw, + [CLKID_FCLK_DIV3_DIV] = &fclk_div3_div.hw, + [CLKID_FCLK_DIV5_DIV] = &fclk_div5_div.hw, + [CLKID_FCLK_DIV7_DIV] = &fclk_div7_div.hw, + [CLKID_FCLK_DIV2] = &fclk_div2.hw, + [CLKID_FCLK_DIV3] = &fclk_div3.hw, + [CLKID_FCLK_DIV5] = &fclk_div5.hw, + [CLKID_FCLK_DIV7] = &fclk_div7.hw, + [CLKID_HIFI_PLL] = &hifi_pll.hw, + [NR_PLL_CLKS] = NULL, + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const a1_pll_regmaps[] = { + &fixed_pll_dco, + &fixed_pll, + &fclk_div2, + &fclk_div3, + &fclk_div5, + &fclk_div7, + &hifi_pll, +}; + +static struct regmap_config a1_pll_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_pll_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_pll_regmaps); i++) + a1_pll_regmaps[i]->map = map; + + /* Register clocks */ + for (clkid = 0; clkid < a1_pll_clks.num; clkid++) { + err = devm_clk_hw_register(dev, a1_pll_clks.hws[clkid]); + if (err) + return dev_err_probe(dev, err, + "clock[%d] registration failed\n", + clkid); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_pll_clks); +} + +static const struct of_device_id a1_pll_clkc_match_table[] = { + { .compatible = "amlogic,a1-pll-clkc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, a1_pll_clkc_match_table); + +static struct platform_driver a1_pll_clkc_driver = { + .probe = meson_a1_pll_probe, + .driver = { + .name = "a1-pll-clkc", + .of_match_table = of_match_ptr(a1_pll_clkc_match_table), + }, +}; + +module_platform_driver(a1_pll_clkc_driver); +MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>"); +MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h new file mode 100644 index 000000000000..69e5e31790f2 --- /dev/null +++ b/drivers/clk/meson/a1-pll.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic Meson-A1 PLL Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu <jian.hu@amlogic.com> + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> + */ + +#ifndef __A1_PLL_H +#define __A1_PLL_H + +#include "clk-pll.h" + +/* PLL register offset */ +#define ANACTRL_FIXPLL_CTRL0 0x0 +#define ANACTRL_FIXPLL_CTRL1 0x4 +#define ANACTRL_FIXPLL_STS 0x14 +#define ANACTRL_HIFIPLL_CTRL0 0xc0 +#define ANACTRL_HIFIPLL_CTRL1 0xc4 +#define ANACTRL_HIFIPLL_CTRL2 0xc8 +#define ANACTRL_HIFIPLL_CTRL3 0xcc +#define ANACTRL_HIFIPLL_CTRL4 0xd0 +#define ANACTRL_HIFIPLL_STS 0xd4 + +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,a1-pll-clkc.h> + +/* + * CLKID index values for internal clocks + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 3 +#define CLKID_FCLK_DIV5_DIV 4 +#define CLKID_FCLK_DIV7_DIV 5 +#define NR_PLL_CLKS 11 + +#endif /* __A1_PLL_H */

[v13,4/6] clk: meson: a1: add Amlogic A1 PLL clock controller driver

Commit Message

Comments

Patch