diff mbox series

[v9,3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Message ID 20230501192432.1220727-4-bhupesh.sharma@linaro.org
State Superseded
Headers show
Series Enable USB SS qmp phy for Qualcomm SM6115 SoC | expand

Commit Message

Bhupesh Sharma May 1, 2023, 7:24 p.m. UTC 
Add USB superspeed qmp phy node to dtsi.

Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
 .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
 3 files changed, 33 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov May 2, 2023, 12:17 a.m. UTC | #1 
On 01/05/2023 22:24, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
>   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>   3 files changed, 33 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Dmitry Baryshkov May 2, 2023, 12:18 a.m. UTC | #2 
On 01/05/2023 22:24, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
>   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>   3 files changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
>   &usb_dwc3 {
>   	maximum-speed = "high-speed";
>   	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>   };
>   
>   &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..21d00b0295a1 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
>   			status = "disabled";
>   		};
>   
> +		usb_qmpphy: phy@1615000 {
> +			compatible = "qcom,sm6115-qmp-usb3-phy";
> +			reg = <0x0 0x01615000 0x0 0x200>;

I replied with R-B, but then I noticed that the length of the region is 
bad. What is the maximum offset that is used by the driver? I know that 
it is bigger than 0x200.

> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "cfg_ahb",
> +				      "ref",
> +				      "com_aux",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> +				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> +			reset-names = "phy", "phy_phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb3_phy_pipe_clk_src";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>   		qfprom@1b40000 {
>   			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>   			reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1111,8 +1136,8 @@ usb_dwc3: usb@4e00000 {
>   				compatible = "snps,dwc3";
>   				reg = <0x0 0x04e00000 0x0 0xcd00>;
>   				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_hsphy>;
> -				phy-names = "usb2-phy";
> +				phys = <&usb_hsphy>, <&usb_qmpphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
>   				iommus = <&apps_smmu 0x120 0x0>;
>   				snps,dis_u2_susphy_quirk;
>   				snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index ea3340d31110..81fdcaf48926 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -306,6 +306,9 @@ &usb {
>   &usb_dwc3 {
>   	maximum-speed = "high-speed";
>   	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>   };
>   
>   &usb_hsphy {
Bhupesh Sharma May 2, 2023, 4:43 a.m. UTC | #3 
On Tue, 2 May 2023 at 05:48, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On 01/05/2023 22:24, Bhupesh Sharma wrote:
> > Add USB superspeed qmp phy node to dtsi.
> >
> > Make sure that the various board dts files (which include sm4250.dtsi file)
> > continue to work as intended.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
> >   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
> >   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
> >   3 files changed, 33 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > index a1f0622db5a0..75951fd439df 100644
> > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > @@ -242,6 +242,9 @@ &usb {
> >   &usb_dwc3 {
> >       maximum-speed = "high-speed";
> >       dr_mode = "peripheral";
> > +
> > +     phys = <&usb_hsphy>;
> > +     phy-names = "usb2-phy";
> >   };
> >
> >   &usb_hsphy {
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index 631ca327e064..21d00b0295a1 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
> >                       status = "disabled";
> >               };
> >
> > +             usb_qmpphy: phy@1615000 {
> > +                     compatible = "qcom,sm6115-qmp-usb3-phy";
> > +                     reg = <0x0 0x01615000 0x0 0x200>;
>
> I replied with R-B, but then I noticed that the length of the region is
> bad. What is the maximum offset that is used by the driver? I know that
> it is bigger than 0x200.

Sure, let me recheck and fix this in the next version.

Thanks,
Bhupesh
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a1f0622db5a0..75951fd439df 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -242,6 +242,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 631ca327e064..21d00b0295a1 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -661,6 +661,31 @@  usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x200>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -1111,8 +1136,8 @@  usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index ea3340d31110..81fdcaf48926 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -306,6 +306,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {