diff mbox series

[2/3] arm64: dts: rockchip: Add Lunzn Fastrhino R66S

Message ID 20230428013738.30735-2-cnsztl@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/3] dt-bindings: Add doc for Fastrhino R66S / R68S | expand

Commit Message

Tianling Shen April 28, 2023, 1:37 a.m. UTC
Lunzn Fastrhino R66S is a high-performance mini router.

Specification:
- Rockchip RK3568
- 1/2GB LPDDR4 RAM
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125b)
- 12v DC Jack

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
 .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
 3 files changed, 535 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi

Comments

Krzysztof Kozlowski April 28, 2023, 1:34 p.m. UTC | #1
On 28/04/2023 03:37, Tianling Shen wrote:
> Lunzn Fastrhino R66S is a high-performance mini router.
> 
> Specification:
> - Rockchip RK3568
> - 1/2GB LPDDR4 RAM
> - SD card slot
> - M.2 Connector
> - 2x USB 3.0 Port
> - 2x 2500 Base-T (PCIe, r8125b)
> - 12v DC Jack
> 
> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
>  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
>  3 files changed, 535 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 2d585bbb8f3a..15089a78555a 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> new file mode 100644
> index 000000000000..fc9e1bdab128
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "rk3568-fastrhino-r66s.dtsi"
> +
> +/ {
> +	model = "Lunzn FastRhino R66S";
> +	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> +
> +	aliases {
> +		mmc0 = &sdmmc0;
> +	};
> +};
> +
> +&sdmmc0 {
> +	max-frequency = <150000000>;
> +	no-sdio;
> +	no-mmc;
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +	vmmc-supply = <&vcc3v3_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> new file mode 100644
> index 000000000000..a58592b2f13b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> @@ -0,0 +1,507 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include "rk3568.dtsi"
> +
> +/ {
> +	aliases {
> +		led-boot = &status_led;
> +		led-failsafe = &status_led;
> +		led-running = &status_led;
> +		led-upgrade = &status_led;

Why do you need these? Which upstream kernel driver parses these?


Best regards,
Krzysztof
Tianling Shen April 29, 2023, 1:29 a.m. UTC | #2
Hi Krzysztof,

On Fri, Apr 28, 2023 at 9:34 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 28/04/2023 03:37, Tianling Shen wrote:
> > Lunzn Fastrhino R66S is a high-performance mini router.
> >
> > Specification:
> > - Rockchip RK3568
> > - 1/2GB LPDDR4 RAM
> > - SD card slot
> > - M.2 Connector
> > - 2x USB 3.0 Port
> > - 2x 2500 Base-T (PCIe, r8125b)
> > - 12v DC Jack
> >
> > Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> > ---
> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
> >  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
> >  3 files changed, 535 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 2d585bbb8f3a..15089a78555a 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > new file mode 100644
> > index 000000000000..fc9e1bdab128
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > +
> > +#include "rk3568-fastrhino-r66s.dtsi"
> > +
> > +/ {
> > +     model = "Lunzn FastRhino R66S";
> > +     compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> > +
> > +     aliases {
> > +             mmc0 = &sdmmc0;
> > +     };
> > +};
> > +
> > +&sdmmc0 {
> > +     max-frequency = <150000000>;
> > +     no-sdio;
> > +     no-mmc;
> > +     bus-width = <4>;
> > +     cap-mmc-highspeed;
> > +     cap-sd-highspeed;
> > +     disable-wp;
> > +     vmmc-supply = <&vcc3v3_sd>;
> > +     vqmmc-supply = <&vccio_sd>;
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> > +     status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> > new file mode 100644
> > index 000000000000..a58592b2f13b
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> > @@ -0,0 +1,507 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/leds/common.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include "rk3568.dtsi"
> > +
> > +/ {
> > +     aliases {
> > +             led-boot = &status_led;
> > +             led-failsafe = &status_led;
> > +             led-running = &status_led;
> > +             led-upgrade = &status_led;
>
> Why do you need these? Which upstream kernel driver parses these?

Oh sorry these aliases are used for OpenWrt and I forgot to remove them
when submitting patches. Will send v2 for it.

Thanks,
Tianling.

>
>
> Best regards,
> Krzysztof
>
Heiko Stuebner May 2, 2023, 9:28 a.m. UTC | #3
Hi,

Am Freitag, 28. April 2023, 03:37:37 CEST schrieb Tianling Shen:
> Lunzn Fastrhino R66S is a high-performance mini router.
> 
> Specification:
> - Rockchip RK3568
> - 1/2GB LPDDR4 RAM
> - SD card slot
> - M.2 Connector
> - 2x USB 3.0 Port
> - 2x 2500 Base-T (PCIe, r8125b)
> - 12v DC Jack
> 
> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
>  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
>  3 files changed, 535 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 2d585bbb8f3a..15089a78555a 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> new file mode 100644
> index 000000000000..fc9e1bdab128
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "rk3568-fastrhino-r66s.dtsi"
> +
> +/ {
> +	model = "Lunzn FastRhino R66S";
> +	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> +
> +	aliases {
> +		mmc0 = &sdmmc0;
> +	};
> +};
> +
> +&sdmmc0 {

that whole element seems to be duplicated from rk3568-fastrhino-r66s.dtsi?
I don't think we need to declare that twice. If something really changes,
please only declare the new properties when going from dtsi to dts.

> +	max-frequency = <150000000>;
> +	no-sdio;
> +	no-mmc;
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +	vmmc-supply = <&vcc3v3_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> +	status = "okay";
> +};

Thanks
Heiko
Heiko Stuebner May 2, 2023, 9:30 a.m. UTC | #4
Am Dienstag, 2. Mai 2023, 11:28:22 CEST schrieb Heiko Stübner:
> Hi,
> 
> Am Freitag, 28. April 2023, 03:37:37 CEST schrieb Tianling Shen:
> > Lunzn Fastrhino R66S is a high-performance mini router.
> > 
> > Specification:
> > - Rockchip RK3568
> > - 1/2GB LPDDR4 RAM
> > - SD card slot
> > - M.2 Connector
> > - 2x USB 3.0 Port
> > - 2x 2500 Base-T (PCIe, r8125b)
> > - 12v DC Jack
> > 
> > Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> > ---
> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
> >  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
> >  3 files changed, 535 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 2d585bbb8f3a..15089a78555a 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > new file mode 100644
> > index 000000000000..fc9e1bdab128
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > +
> > +#include "rk3568-fastrhino-r66s.dtsi"
> > +
> > +/ {
> > +	model = "Lunzn FastRhino R66S";
> > +	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> > +
> > +	aliases {
> > +		mmc0 = &sdmmc0;
> > +	};
> > +};
> > +
> > +&sdmmc0 {
> 
> that whole element seems to be duplicated from rk3568-fastrhino-r66s.dtsi?
> I don't think we need to declare that twice. If something really changes,
> please only declare the new properties when going from dtsi to dts.

Looking at patch3 I see the explanation :-) .

The base dtsi should not contain the &sdmmc0 node, and it should
only be included in the rk3568-fastrhino-r66s.dts, right?


Heiko
Tianling Shen May 2, 2023, 9:53 a.m. UTC | #5
Hi Heiko,

On Tue, May 2, 2023 at 5:30 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Am Dienstag, 2. Mai 2023, 11:28:22 CEST schrieb Heiko Stübner:
> > Hi,
> >
> > Am Freitag, 28. April 2023, 03:37:37 CEST schrieb Tianling Shen:
> > > Lunzn Fastrhino R66S is a high-performance mini router.
> > >
> > > Specification:
> > > - Rockchip RK3568
> > > - 1/2GB LPDDR4 RAM
> > > - SD card slot
> > > - M.2 Connector
> > > - 2x USB 3.0 Port
> > > - 2x 2500 Base-T (PCIe, r8125b)
> > > - 12v DC Jack
> > >
> > > Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> > > ---
> > >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> > >  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
> > >  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
> > >  3 files changed, 535 insertions(+)
> > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > > index 2d585bbb8f3a..15089a78555a 100644
> > > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > > @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
> > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > > new file mode 100644
> > > index 000000000000..fc9e1bdab128
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > > @@ -0,0 +1,27 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > > +
> > > +#include "rk3568-fastrhino-r66s.dtsi"
> > > +
> > > +/ {
> > > +   model = "Lunzn FastRhino R66S";
> > > +   compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> > > +
> > > +   aliases {
> > > +           mmc0 = &sdmmc0;
> > > +   };
> > > +};
> > > +
> > > +&sdmmc0 {
> >
> > that whole element seems to be duplicated from rk3568-fastrhino-r66s.dtsi?
> > I don't think we need to declare that twice. If something really changes,
> > please only declare the new properties when going from dtsi to dts.
>
> Looking at patch3 I see the explanation :-) .
>
> The base dtsi should not contain the &sdmmc0 node, and it should
> only be included in the rk3568-fastrhino-r66s.dts, right?
>

Yes, nice catch!

And I found another error in the R68S dts file (gmac pcfg pull type).
Unfortunately I don't have this board right now, and I'm still waiting
for the test result from my friend. Suppose sending v2 in the next few
days.

Thanks,
Tianling.

>
> Heiko
>
>
Heiko Stuebner May 2, 2023, 10:04 a.m. UTC | #6
Am Dienstag, 2. Mai 2023, 11:53:58 CEST schrieb Tianling Shen:
> Hi Heiko,
> 
> On Tue, May 2, 2023 at 5:30 PM Heiko Stübner <heiko@sntech.de> wrote:
> >
> > Am Dienstag, 2. Mai 2023, 11:28:22 CEST schrieb Heiko Stübner:
> > > Hi,
> > >
> > > Am Freitag, 28. April 2023, 03:37:37 CEST schrieb Tianling Shen:
> > > > Lunzn Fastrhino R66S is a high-performance mini router.
> > > >
> > > > Specification:
> > > > - Rockchip RK3568
> > > > - 1/2GB LPDDR4 RAM
> > > > - SD card slot
> > > > - M.2 Connector
> > > > - 2x USB 3.0 Port
> > > > - 2x 2500 Base-T (PCIe, r8125b)
> > > > - 12v DC Jack
> > > >
> > > > Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> > > > ---
> > > >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> > > >  .../dts/rockchip/rk3568-fastrhino-r66s.dts    |  27 +
> > > >  .../dts/rockchip/rk3568-fastrhino-r66s.dtsi   | 507 ++++++++++++++++++
> > > >  3 files changed, 535 insertions(+)
> > > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
> > > >
> > > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > > > index 2d585bbb8f3a..15089a78555a 100644
> > > > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > > > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > > > @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> > > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
> > > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
> > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > > > new file mode 100644
> > > > index 000000000000..fc9e1bdab128
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
> > > > @@ -0,0 +1,27 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > > > +
> > > > +#include "rk3568-fastrhino-r66s.dtsi"
> > > > +
> > > > +/ {
> > > > +   model = "Lunzn FastRhino R66S";
> > > > +   compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
> > > > +
> > > > +   aliases {
> > > > +           mmc0 = &sdmmc0;
> > > > +   };
> > > > +};
> > > > +
> > > > +&sdmmc0 {
> > >
> > > that whole element seems to be duplicated from rk3568-fastrhino-r66s.dtsi?
> > > I don't think we need to declare that twice. If something really changes,
> > > please only declare the new properties when going from dtsi to dts.
> >
> > Looking at patch3 I see the explanation :-) .
> >
> > The base dtsi should not contain the &sdmmc0 node, and it should
> > only be included in the rk3568-fastrhino-r66s.dts, right?
> >
> 
> Yes, nice catch!
> 
> And I found another error in the R68S dts file (gmac pcfg pull type).
> Unfortunately I don't have this board right now, and I'm still waiting
> for the test result from my friend. Suppose sending v2 in the next few
> days.

no worries, send when you're ready :-)

Heiko
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 2d585bbb8f3a..15089a78555a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -85,6 +85,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
new file mode 100644
index 000000000000..fc9e1bdab128
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
@@ -0,0 +1,27 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk3568-fastrhino-r66s.dtsi"
+
+/ {
+	model = "Lunzn FastRhino R66S";
+	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdmmc0;
+	};
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
new file mode 100644
index 000000000000..a58592b2f13b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -0,0 +1,507 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		led-boot = &status_led;
+		led-failsafe = &status_led;
+		led-running = &status_led;
+		led-upgrade = &status_led;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-status {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-init-microvolt = <950000>;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};