| Message ID | 20230427-hammerhead-vibra-v1-4-e87eeb94da51@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Add haptics support to Nexus 5 using pwm-vibra driver | expand |
On Thu, Apr 27, 2023 at 10:34:29PM +0200, Luca Weiss wrote: > The Nexus 5 has a vibrator connected to the clock output of GP1_CLK > which we can use with the clk-pwm driver, then we can use that pwm with > pwm-vibrator to get haptics functionality. > > This patch is based on Brian Masney's previous patch with clk-vibrator. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Brian Masney <bmasney@redhat.com>
On 27/04/2023 21:34, Luca Weiss wrote: > The Nexus 5 has a vibrator connected to the clock output of GP1_CLK > which we can use with the clk-pwm driver, then we can use that pwm with > pwm-vibrator to get haptics functionality. > > This patch is based on Brian Masney's previous patch with clk-vibrator. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > index ab35f2d644c0..fea8a6be9021 100644 > --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > @@ -41,6 +41,25 @@ key-volume-down { > }; > }; > > + clk_pwm: pwm { > + compatible = "clk-pwm"; > + clocks = <&mmcc CAMSS_GP1_CLK>; > + > + pinctrl-0 = <&vibrator_pin>; > + pinctrl-names = "default"; > + > + #pwm-cells = <2>; > + }; > + > + vibrator { > + compatible = "pwm-vibrator"; > + pwms = <&clk_pwm 0 100000>; > + pwm-names = "enable"; > + > + vcc-supply = <&pm8941_l19>; > + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; > + }; > + > vreg_wlan: wlan-regulator { > compatible = "regulator-fixed"; > > @@ -637,6 +656,22 @@ shutdown-pins { > function = "gpio"; > }; > }; > + > + vibrator_pin: vibrator-state { > + core-pins { > + pins = "gpio27"; > + function = "gp1_clk"; > + drive-strength = <6>; > + bias-disable; > + }; > + > + enable-pins { > + pins = "gpio60"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > }; > > &usb { >
On 27.04.2023 22:34, Luca Weiss wrote: > The Nexus 5 has a vibrator connected to the clock output of GP1_CLK > which we can use with the clk-pwm driver, then we can use that pwm with > pwm-vibrator to get haptics functionality. > > This patch is based on Brian Masney's previous patch with clk-vibrator. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > index ab35f2d644c0..fea8a6be9021 100644 > --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > @@ -41,6 +41,25 @@ key-volume-down { > }; > }; > > + clk_pwm: pwm { > + compatible = "clk-pwm"; > + clocks = <&mmcc CAMSS_GP1_CLK>; Are you sure it's <&mmcc CAMSS_GP1_CLK> and not <&gcc GCC_GP1_CLK>? Konrad > + > + pinctrl-0 = <&vibrator_pin>; > + pinctrl-names = "default"; > + > + #pwm-cells = <2>; > + }; > + > + vibrator { > + compatible = "pwm-vibrator"; > + pwms = <&clk_pwm 0 100000>; > + pwm-names = "enable"; > + > + vcc-supply = <&pm8941_l19>; > + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; > + }; > + > vreg_wlan: wlan-regulator { > compatible = "regulator-fixed"; > > @@ -637,6 +656,22 @@ shutdown-pins { > function = "gpio"; > }; > }; > + > + vibrator_pin: vibrator-state { > + core-pins { > + pins = "gpio27"; > + function = "gp1_clk"; > + drive-strength = <6>; > + bias-disable; > + }; > + > + enable-pins { > + pins = "gpio60"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > }; > > &usb { >
On Dienstag, 2. Mai 2023 12:40:40 CEST Konrad Dybcio wrote: > On 27.04.2023 22:34, Luca Weiss wrote: > > The Nexus 5 has a vibrator connected to the clock output of GP1_CLK > > which we can use with the clk-pwm driver, then we can use that pwm with > > pwm-vibrator to get haptics functionality. > > > > This patch is based on Brian Masney's previous patch with clk-vibrator. > > > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > > --- > > > > .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 > > ++++++++++++++++++++++ 1 file changed, 35 insertions(+) > > > > diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > > b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index > > ab35f2d644c0..fea8a6be9021 100644 > > --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > > +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > > @@ -41,6 +41,25 @@ key-volume-down { > > > > }; > > > > }; > > > > + clk_pwm: pwm { > > + compatible = "clk-pwm"; > > + clocks = <&mmcc CAMSS_GP1_CLK>; > > Are you sure it's <&mmcc CAMSS_GP1_CLK> and not <&gcc GCC_GP1_CLK>? Quite sure. The driver uses: cam_gp1_clk = clk_get(&pdev->dev, "cam_gp1_clk"); and this comes from the clock-8974.c driver CLK_LOOKUP("cam_gp1_clk", camss_gp1_clk.c, "vibrator"), Regards Luca > > Konrad > > > + > > + pinctrl-0 = <&vibrator_pin>; > > + pinctrl-names = "default"; > > + > > + #pwm-cells = <2>; > > + }; > > + > > + vibrator { > > + compatible = "pwm-vibrator"; > > + pwms = <&clk_pwm 0 100000>; > > + pwm-names = "enable"; > > + > > + vcc-supply = <&pm8941_l19>; > > + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; > > + }; > > + > > > > vreg_wlan: wlan-regulator { > > > > compatible = "regulator-fixed"; > > > > @@ -637,6 +656,22 @@ shutdown-pins { > > > > function = "gpio"; > > > > }; > > > > }; > > > > + > > + vibrator_pin: vibrator-state { > > + core-pins { > > + pins = "gpio27"; > > + function = "gp1_clk"; > > + drive-strength = <6>; > > + bias-disable; > > + }; > > + > > + enable-pins { > > + pins = "gpio60"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + }; > > > > }; > > > > &usb {
On 2.05.2023 17:28, Luca Weiss wrote: > On Dienstag, 2. Mai 2023 12:40:40 CEST Konrad Dybcio wrote: >> On 27.04.2023 22:34, Luca Weiss wrote: >>> The Nexus 5 has a vibrator connected to the clock output of GP1_CLK >>> which we can use with the clk-pwm driver, then we can use that pwm with >>> pwm-vibrator to get haptics functionality. >>> >>> This patch is based on Brian Masney's previous patch with clk-vibrator. >>> >>> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> >>> --- >>> >>> .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 >>> ++++++++++++++++++++++ 1 file changed, 35 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts >>> b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index >>> ab35f2d644c0..fea8a6be9021 100644 >>> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts >>> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts >>> @@ -41,6 +41,25 @@ key-volume-down { >>> >>> }; >>> >>> }; >>> >>> + clk_pwm: pwm { >>> + compatible = "clk-pwm"; >>> + clocks = <&mmcc CAMSS_GP1_CLK>; >> >> Are you sure it's <&mmcc CAMSS_GP1_CLK> and not <&gcc GCC_GP1_CLK>? > > Quite sure. > > The driver uses: > > cam_gp1_clk = clk_get(&pdev->dev, "cam_gp1_clk"); > > and this comes from the clock-8974.c driver > > CLK_LOOKUP("cam_gp1_clk", camss_gp1_clk.c, "vibrator"), > > Regards > Luca ugh that hurts my brain but fine, maybe the camss clock had a pad closer to the vibrator pcb traces.. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > >> >> Konrad >> >>> + >>> + pinctrl-0 = <&vibrator_pin>; >>> + pinctrl-names = "default"; >>> + >>> + #pwm-cells = <2>; >>> + }; >>> + >>> + vibrator { >>> + compatible = "pwm-vibrator"; >>> + pwms = <&clk_pwm 0 100000>; >>> + pwm-names = "enable"; >>> + >>> + vcc-supply = <&pm8941_l19>; >>> + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; >>> + }; >>> + >>> >>> vreg_wlan: wlan-regulator { >>> >>> compatible = "regulator-fixed"; >>> >>> @@ -637,6 +656,22 @@ shutdown-pins { >>> >>> function = "gpio"; >>> >>> }; >>> >>> }; >>> >>> + >>> + vibrator_pin: vibrator-state { >>> + core-pins { >>> + pins = "gpio27"; >>> + function = "gp1_clk"; >>> + drive-strength = <6>; >>> + bias-disable; >>> + }; >>> + >>> + enable-pins { >>> + pins = "gpio60"; >>> + function = "gpio"; >>> + drive-strength = <2>; >>> + bias-disable; >>> + }; >>> + }; >>> >>> }; >>> >>> &usb { > > > >
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..fea8a6be9021 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -41,6 +41,25 @@ key-volume-down { }; }; + clk_pwm: pwm { + compatible = "clk-pwm"; + clocks = <&mmcc CAMSS_GP1_CLK>; + + pinctrl-0 = <&vibrator_pin>; + pinctrl-names = "default"; + + #pwm-cells = <2>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&clk_pwm 0 100000>; + pwm-names = "enable"; + + vcc-supply = <&pm8941_l19>; + enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -637,6 +656,22 @@ shutdown-pins { function = "gpio"; }; }; + + vibrator_pin: vibrator-state { + core-pins { + pins = "gpio27"; + function = "gp1_clk"; + drive-strength = <6>; + bias-disable; + }; + + enable-pins { + pins = "gpio60"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; }; &usb {
The Nexus 5 has a vibrator connected to the clock output of GP1_CLK which we can use with the clk-pwm driver, then we can use that pwm with pwm-vibrator to get haptics functionality. This patch is based on Brian Masney's previous patch with clk-vibrator. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+)