diff mbox series

[V2] arm64: dts: add support for C3 based Amlogic AW409

Message ID 20230427085859.793802-1-xianwei.zhao@amlogic.com (mailing list archive)
State Superseded
Headers show
Series [V2] arm64: dts: add support for C3 based Amlogic AW409 | expand

Commit Message

Xianwei Zhao April 27, 2023, 8:58 a.m. UTC 
Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>

---
V1 -> V2: Remove new arch, and use ARCH_MESON;
          Modify node name, and delete superfluous blank lines.
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
 3 files changed, 116 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi


base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833

Comments

Christian Hewitt April 27, 2023, 9:28 a.m. UTC | #1 
> On 27 Apr 2023, at 9:58 am, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
> 
> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
> applications.
> 
> Add basic support for the C3 based Amlogic AW409 board, which describes
> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
> booting up into the serial console.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> 
> ---
> V1 -> V2: Remove new arch, and use ARCH_MESON;
>         Modify node name, and delete superfluous blank lines.
> ---
> arch/arm64/boot/dts/amlogic/Makefile          |  1 +
> .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
> 3 files changed, 116 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cd1c5b04890a..bcec872c2444 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb

^ please keep the list alpha-sorted, and 256m is described in the dts
so there is no need to include it in the board filename. I would also
expect meson-c3* to align with existing filenames, but I’ll let others
comment on naming rules.

Christian

> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
> new file mode 100644
> index 000000000000..edce8850b338
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-c3.dtsi"
> +
> +/ {
> +	model = "Amlogic C302 aw409 Development Board";
> +	compatible = "amlogic,aw409", "amlogic,c3";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_b;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x10000000>;
> +	};
> +};
> +
> +&uart_b {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> new file mode 100644
> index 000000000000..93b335aef605
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller@fff01000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x2000>,
> +			      <0x0 0xfff04000 0 0x2000>,
> +			      <0x0 0xfff06000 0 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		apb4: bus@fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_b: serial@7a000 {
> +				compatible = "amlogic,meson-g12a-uart";
> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +			};
> +
> +		};
> +	};
> +};
> 
> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
> -- 
> 2.37.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
Krzysztof Kozlowski May 1, 2023, 9:58 a.m. UTC | #2 
On 27/04/2023 10:58, Xianwei Zhao wrote:
> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
> applications.
> 
> Add basic support for the C3 based Amlogic AW409 board, which describes
> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
> booting up into the serial console.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> 
> ---
> V1 -> V2: Remove new arch, and use ARCH_MESON;
>           Modify node name, and delete superfluous blank lines.
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
>  arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>  3 files changed, 116 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index cd1c5b04890a..bcec872c2444 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb

Looks wrongly ordered. 'a' is before 'm'.

> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
> new file mode 100644
> index 000000000000..edce8850b338
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-c3.dtsi"
> +
> +/ {
> +	model = "Amlogic C302 aw409 Development Board";
> +	compatible = "amlogic,aw409", "amlogic,c3";

Missing bindings.

Please run scripts/checkpatch.pl and fix reported warnings.

Best regards,
Krzysztof
Xianwei Zhao May 5, 2023, 2:19 a.m. UTC | #3 
Hi Christian,
      Thanks for your advice.

On 2023/4/27 17:28, Christian Hewitt wrote:
> [你通常不会收到来自 christianshewitt@gmail.com 的电子邮件。请访问 https://aka.ms/LearnAboutSenderIdentification，以了解这一点为什么很重要]
> 
> [ EXTERNAL EMAIL ]
> 
>> On 27 Apr 2023, at 9:58 am, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
>>
>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>> applications.
>>
>> Add basic support for the C3 based Amlogic AW409 board, which describes
>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>> booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> ---
>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>          Modify node name, and delete superfluous blank lines.
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>> .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
>> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>> 3 files changed, 116 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>> create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index cd1c5b04890a..bcec872c2444 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb
> 
> ^ please keep the list alpha-sorted, and 256m is described in the dts
> so there is no need to include it in the board filename. I would also
> expect meson-c3* to align with existing filenames, but I’ll let others
> comment on naming rules.
> 
Keep alpha-sorted will do in next version, the characters "256m" will 
delete also. The word meson will be removed in the future before 
discuss, so use the word amlogic.
> Christian
> 
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>> new file mode 100644
>> index 000000000000..edce8850b338
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-c3.dtsi"
>> +
>> +/ {
>> +     model = "Amlogic C302 aw409 Development Board";
>> +     compatible = "amlogic,aw409", "amlogic,c3";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>> +     #size-cells = <2>;
>> +
>> +     aliases {
>> +             serial0 = &uart_b;
>> +     };
>> +
>> +     memory@0 {
>> +             device_type = "memory";
>> +             reg = <0x0 0x0 0x0 0x10000000>;
>> +     };
>> +};
>> +
>> +&uart_b {
>> +     status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> new file mode 100644
>> index 000000000000..93b335aef605
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -0,0 +1,86 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +     cpus {
>> +             #address-cells = <2>;
>> +             #size-cells = <0>;
>> +
>> +             cpu0: cpu@0 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x0>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu1: cpu@1 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x1>;
>> +                     enable-method = "psci";
>> +             };
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv8-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> +     };
>> +
>> +     psci {
>> +             compatible = "arm,psci-1.0";
>> +             method = "smc";
>> +     };
>> +
>> +     xtal: xtal-clk {
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <24000000>;
>> +             clock-output-names = "xtal";
>> +             #clock-cells = <0>;
>> +     };
>> +
>> +     soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller@fff01000 {
>> +                     compatible = "arm,gic-400";
>> +                     #interrupt-cells = <3>;
>> +                     #address-cells = <0>;
>> +                     interrupt-controller;
>> +                     reg = <0x0 0xfff01000 0 0x1000>,
>> +                           <0x0 0xfff02000 0 0x2000>,
>> +                           <0x0 0xfff04000 0 0x2000>,
>> +                           <0x0 0xfff06000 0 0x2000>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             apb4: bus@fe000000 {
>> +                     compatible = "simple-bus";
>> +                     reg = <0x0 0xfe000000 0x0 0x480000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> +                     uart_b: serial@7a000 {
>> +                             compatible = "amlogic,meson-g12a-uart";
>> +                             reg = <0x0 0x7a000 0x0 0x18>;
>> +                             interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
>> +                             status = "disabled";
>> +                             clocks = <&xtal>, <&xtal>, <&xtal>;
>> +                             clock-names = "xtal", "pclk", "baud";
>> +                     };
>> +
>> +             };
>> +     };
>> +};
>>
>> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
>> --
>> 2.37.1
>>
>>
>> _______________________________________________
>> linux-amlogic mailing list
>> linux-amlogic@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
Xianwei Zhao May 5, 2023, 2:37 a.m. UTC | #4 
Hi Krzysztof,
      Thank you for your reply.

On 2023/5/1 17:58, Krzysztof Kozlowski wrote:
> [你通常不会收到来自 krzysztof.kozlowski@linaro.org 的电子邮件。请访问 https://aka.ms/LearnAboutSenderIdentification，以了解这一点为什么很重要]
> 
> [ EXTERNAL EMAIL ]
> 
> On 27/04/2023 10:58, Xianwei Zhao wrote:
>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>> applications.
>>
>> Add basic support for the C3 based Amlogic AW409 board, which describes
>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>> booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>
>> ---
>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>            Modify node name, and delete superfluous blank lines.
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>   .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
>>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>>   3 files changed, 116 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index cd1c5b04890a..bcec872c2444 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb
> 
> Looks wrongly ordered. 'a' is before 'm'.
Will do.
> 
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>> new file mode 100644
>> index 000000000000..edce8850b338
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-c3.dtsi"
>> +
>> +/ {
>> +     model = "Amlogic C302 aw409 Development Board";
>> +     compatible = "amlogic,aw409", "amlogic,c3";
> 
> Missing bindings.
> 
> Please run scripts/checkpatch.pl and fix reported warnings.
> 
The bindings committed by Neil, it is applied to 
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git 
(v6.5/arm64-dt),
bindings: 
https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com/
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski May 5, 2023, 6:34 a.m. UTC | #5 
On 05/05/2023 04:37, xianwei.zhao wrote:
> Hi Krzysztof,
>       Thank you for your reply.
> 
> On 2023/5/1 17:58, Krzysztof Kozlowski wrote:
>> [你通常不会收到来自 krzysztof.kozlowski@linaro.org 的电子邮件。请访问 https://aka.ms/LearnAboutSenderIdentification，以了解这一点为什么很重要]
>>
>> [ EXTERNAL EMAIL ]
>>
>> On 27/04/2023 10:58, Xianwei Zhao wrote:
>>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>>> applications.
>>>
>>> Add basic support for the C3 based Amlogic AW409 board, which describes
>>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>>> booting up into the serial console.
>>>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>
>>> ---
>>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>>            Modify node name, and delete superfluous blank lines.
>>> ---
>>>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>>   .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
>>>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>>>   3 files changed, 116 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>> index cd1c5b04890a..bcec872c2444 100644
>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb
>>
>> Looks wrongly ordered. 'a' is before 'm'.
> Will do.
>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>> new file mode 100644
>>> index 000000000000..edce8850b338
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>> @@ -0,0 +1,29 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "amlogic-c3.dtsi"
>>> +
>>> +/ {
>>> +     model = "Amlogic C302 aw409 Development Board";
>>> +     compatible = "amlogic,aw409", "amlogic,c3";
>>
>> Missing bindings.
>>
>> Please run scripts/checkpatch.pl and fix reported warnings.
>>
> The bindings committed by Neil, it is applied to 
> https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git 
> (v6.5/arm64-dt),
> bindings: 
> https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com/

It's not in the next, so please always link them. We expect them always
together, so if you decide to do otherwise, it's your job now to keep us
informed. Otherwise how can we know that you sent bindings or you didn't?

Best regards,
Krzysztof
Xianwei Zhao May 5, 2023, 6:43 a.m. UTC | #6 
On 2023/5/5 14:34, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
> 
> On 05/05/2023 04:37, xianwei.zhao wrote:
>> Hi Krzysztof,
>>        Thank you for your reply.
>>
>> On 2023/5/1 17:58, Krzysztof Kozlowski wrote:
>>> [你通常不会收到来自 krzysztof.kozlowski@linaro.org 的电子邮件。请访问 https://aka.ms/LearnAboutSenderIdentification，以了解这一点为什么很重要]
>>>
>>> [ EXTERNAL EMAIL ]
>>>
>>> On 27/04/2023 10:58, Xianwei Zhao wrote:
>>>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>>>> applications.
>>>>
>>>> Add basic support for the C3 based Amlogic AW409 board, which describes
>>>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>>>> booting up into the serial console.
>>>>
>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>>
>>>> ---
>>>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>>>             Modify node name, and delete superfluous blank lines.
>>>> ---
>>>>    arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>>>    .../amlogic/amlogic-c3-c302x-aw409-256m.dts   | 29 +++++++
>>>>    arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>>>>    3 files changed, 116 insertions(+)
>>>>    create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>>>    create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>>>> index cd1c5b04890a..bcec872c2444 100644
>>>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>>>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>>>> @@ -74,3 +74,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>>>>    dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>>>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb
>>>
>>> Looks wrongly ordered. 'a' is before 'm'.
>> Will do.
>>>
>>>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>>> new file mode 100644
>>>> index 000000000000..edce8850b338
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
>>>> @@ -0,0 +1,29 @@
>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>> +/*
>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "amlogic-c3.dtsi"
>>>> +
>>>> +/ {
>>>> +     model = "Amlogic C302 aw409 Development Board";
>>>> +     compatible = "amlogic,aw409", "amlogic,c3";
>>>
>>> Missing bindings.
>>>
>>> Please run scripts/checkpatch.pl and fix reported warnings.
>>>
>> The bindings committed by Neil, it is applied to
>> https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
>> (v6.5/arm64-dt),
>> bindings:
>> https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com/
> 
> It's not in the next, so please always link them. We expect them always
> together, so if you decide to do otherwise, it's your job now to keep us
> informed. Otherwise how can we know that you sent bindings or you didn't?
> 
Will add link in V3,thanks.
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..bcec872c2444 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -74,3 +74,4 @@  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409-256m.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
new file mode 100644
index 000000000000..edce8850b338
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409-256m.dts
@@ -0,0 +1,29 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000000..93b335aef605
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,86 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-g12a-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+		};
+	};
+};