diff mbox series

[6/6] ARM: dts: msm8226: Add thermal zones node

Message ID 20230507201225.89694-7-matti.lehtimaki@gmail.com (mailing list archive)
State Accepted
Commit 8d4236f62f3acbc6a0def79106c13fe7344d8238
Headers show
Series Enable MSM8226 TSENS support | expand

Commit Message

Matti Lehtimäki May 7, 2023, 8:12 p.m. UTC 
Add thermal zones present on MSM8226 SoC.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
---
 arch/arm/boot/dts/qcom-msm8226.dtsi | 44 +++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Dmitry Baryshkov May 7, 2023, 8:48 p.m. UTC | #1 
On 07/05/2023 23:12, Matti Lehtimäki wrote:
> Add thermal zones present on MSM8226 SoC.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm/boot/dts/qcom-msm8226.dtsi | 44 +++++++++++++++++++++++++++++
>   1 file changed, 44 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index a0c3d25eea65..f68556b15183 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -752,6 +752,50 @@  smd-edge {
 		};
 	};
 
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 2