Message ID | 20230506062909.74601-6-sarthakkukreti@chromium.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v6,1/5] block: Don't invalidate pagecache for invalid falloc modes | expand |
On Fri, May 05, 2023 at 11:29:09PM -0700, Sarthak Kukreti wrote: > Add support for provision requests to loopback devices. > Loop devices will configure provision support based on > whether the underlying block device/file can support > the provision request and upon receiving a provision bio, > will map it to the backing device/storage. For loop devices > over files, a REQ_OP_PROVISION request will translate to > an fallocate mode 0 call on the backing file. > > Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> > --- > drivers/block/loop.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/drivers/block/loop.c b/drivers/block/loop.c > index bc31bb7072a2..13c4b4f8b9c1 100644 > --- a/drivers/block/loop.c > +++ b/drivers/block/loop.c > @@ -327,6 +327,24 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, > return ret; > } > > +static int lo_req_provision(struct loop_device *lo, struct request *rq, loff_t pos) > +{ > + struct file *file = lo->lo_backing_file; > + struct request_queue *q = lo->lo_queue; > + int ret; > + > + if (!q->limits.max_provision_sectors) { > + ret = -EOPNOTSUPP; > + goto out; > + } > + > + ret = file->f_op->fallocate(file, 0, pos, blk_rq_bytes(rq)); > + if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP)) > + ret = -EIO; > + out: > + return ret; > +} > + > static int lo_req_flush(struct loop_device *lo, struct request *rq) > { > int ret = vfs_fsync(lo->lo_backing_file, 0); > @@ -488,6 +506,8 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq) > FALLOC_FL_PUNCH_HOLE); > case REQ_OP_DISCARD: > return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE); > + case REQ_OP_PROVISION: > + return lo_req_provision(lo, rq, pos); Hi Sarthak, The only thing that stands out to me is the separate lo_req_provision() helper here. It seems it might be a little cleaner to extend and reuse lo_req_fallocate()..? But that's not something I feel strongly about, so this all looks pretty good to me either way, FWIW. Brian > case REQ_OP_WRITE: > if (cmd->use_aio) > return lo_rw_aio(lo, cmd, pos, ITER_SOURCE); > @@ -754,6 +774,25 @@ static void loop_sysfs_exit(struct loop_device *lo) > &loop_attribute_group); > } > > +static void loop_config_provision(struct loop_device *lo) > +{ > + struct file *file = lo->lo_backing_file; > + struct inode *inode = file->f_mapping->host; > + > + /* > + * If the backing device is a block device, mirror its provisioning > + * capability. > + */ > + if (S_ISBLK(inode->i_mode)) { > + blk_queue_max_provision_sectors(lo->lo_queue, > + bdev_max_provision_sectors(I_BDEV(inode))); > + } else if (file->f_op->fallocate) { > + blk_queue_max_provision_sectors(lo->lo_queue, UINT_MAX >> 9); > + } else { > + blk_queue_max_provision_sectors(lo->lo_queue, 0); > + } > +} > + > static void loop_config_discard(struct loop_device *lo) > { > struct file *file = lo->lo_backing_file; > @@ -1092,6 +1131,7 @@ static int loop_configure(struct loop_device *lo, fmode_t mode, > blk_queue_io_min(lo->lo_queue, bsize); > > loop_config_discard(lo); > + loop_config_provision(lo); > loop_update_rotational(lo); > loop_update_dio(lo); > loop_sysfs_init(lo); > @@ -1304,6 +1344,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) > } > > loop_config_discard(lo); > + loop_config_provision(lo); > > /* update dio if lo_offset or transfer is changed */ > __loop_update_dio(lo, lo->use_dio); > @@ -1830,6 +1871,7 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx, > case REQ_OP_FLUSH: > case REQ_OP_DISCARD: > case REQ_OP_WRITE_ZEROES: > + case REQ_OP_PROVISION: > cmd->use_aio = false; > break; > default: > -- > 2.40.1.521.gf1e218fcd8-goog >
On Mon, May 15, 2023 at 5:37 AM Brian Foster <bfoster@redhat.com> wrote: > > On Fri, May 05, 2023 at 11:29:09PM -0700, Sarthak Kukreti wrote: > > Add support for provision requests to loopback devices. > > Loop devices will configure provision support based on > > whether the underlying block device/file can support > > the provision request and upon receiving a provision bio, > > will map it to the backing device/storage. For loop devices > > over files, a REQ_OP_PROVISION request will translate to > > an fallocate mode 0 call on the backing file. > > > > Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> > > --- > > drivers/block/loop.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 42 insertions(+) > > > > diff --git a/drivers/block/loop.c b/drivers/block/loop.c > > index bc31bb7072a2..13c4b4f8b9c1 100644 > > --- a/drivers/block/loop.c > > +++ b/drivers/block/loop.c > > @@ -327,6 +327,24 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, > > return ret; > > } > > > > +static int lo_req_provision(struct loop_device *lo, struct request *rq, loff_t pos) > > +{ > > + struct file *file = lo->lo_backing_file; > > + struct request_queue *q = lo->lo_queue; > > + int ret; > > + > > + if (!q->limits.max_provision_sectors) { > > + ret = -EOPNOTSUPP; > > + goto out; > > + } > > + > > + ret = file->f_op->fallocate(file, 0, pos, blk_rq_bytes(rq)); > > + if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP)) > > + ret = -EIO; > > + out: > > + return ret; > > +} > > + > > static int lo_req_flush(struct loop_device *lo, struct request *rq) > > { > > int ret = vfs_fsync(lo->lo_backing_file, 0); > > @@ -488,6 +506,8 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq) > > FALLOC_FL_PUNCH_HOLE); > > case REQ_OP_DISCARD: > > return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE); > > + case REQ_OP_PROVISION: > > + return lo_req_provision(lo, rq, pos); > > Hi Sarthak, > > The only thing that stands out to me is the separate lo_req_provision() > helper here. It seems it might be a little cleaner to extend and reuse > lo_req_fallocate()..? But that's not something I feel strongly about, so > this all looks pretty good to me either way, FWIW. > Fair point, I think that should shorten the patch (and for correctness, we'd want to add FALLOC_FL_KEEP_SIZE for REQ_OP_PROVISION too). I'll fix this up in v7. Best Sarthak > Brian > > > case REQ_OP_WRITE: > > if (cmd->use_aio) > > return lo_rw_aio(lo, cmd, pos, ITER_SOURCE); > > @@ -754,6 +774,25 @@ static void loop_sysfs_exit(struct loop_device *lo) > > &loop_attribute_group); > > } > > > > +static void loop_config_provision(struct loop_device *lo) > > +{ > > + struct file *file = lo->lo_backing_file; > > + struct inode *inode = file->f_mapping->host; > > + > > + /* > > + * If the backing device is a block device, mirror its provisioning > > + * capability. > > + */ > > + if (S_ISBLK(inode->i_mode)) { > > + blk_queue_max_provision_sectors(lo->lo_queue, > > + bdev_max_provision_sectors(I_BDEV(inode))); > > + } else if (file->f_op->fallocate) { > > + blk_queue_max_provision_sectors(lo->lo_queue, UINT_MAX >> 9); > > + } else { > > + blk_queue_max_provision_sectors(lo->lo_queue, 0); > > + } > > +} > > + > > static void loop_config_discard(struct loop_device *lo) > > { > > struct file *file = lo->lo_backing_file; > > @@ -1092,6 +1131,7 @@ static int loop_configure(struct loop_device *lo, fmode_t mode, > > blk_queue_io_min(lo->lo_queue, bsize); > > > > loop_config_discard(lo); > > + loop_config_provision(lo); > > loop_update_rotational(lo); > > loop_update_dio(lo); > > loop_sysfs_init(lo); > > @@ -1304,6 +1344,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) > > } > > > > loop_config_discard(lo); > > + loop_config_provision(lo); > > > > /* update dio if lo_offset or transfer is changed */ > > __loop_update_dio(lo, lo->use_dio); > > @@ -1830,6 +1871,7 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx, > > case REQ_OP_FLUSH: > > case REQ_OP_DISCARD: > > case REQ_OP_WRITE_ZEROES: > > + case REQ_OP_PROVISION: > > cmd->use_aio = false; > > break; > > default: > > -- > > 2.40.1.521.gf1e218fcd8-goog > > >
diff --git a/drivers/block/loop.c b/drivers/block/loop.c index bc31bb7072a2..13c4b4f8b9c1 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -327,6 +327,24 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, return ret; } +static int lo_req_provision(struct loop_device *lo, struct request *rq, loff_t pos) +{ + struct file *file = lo->lo_backing_file; + struct request_queue *q = lo->lo_queue; + int ret; + + if (!q->limits.max_provision_sectors) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = file->f_op->fallocate(file, 0, pos, blk_rq_bytes(rq)); + if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP)) + ret = -EIO; + out: + return ret; +} + static int lo_req_flush(struct loop_device *lo, struct request *rq) { int ret = vfs_fsync(lo->lo_backing_file, 0); @@ -488,6 +506,8 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq) FALLOC_FL_PUNCH_HOLE); case REQ_OP_DISCARD: return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE); + case REQ_OP_PROVISION: + return lo_req_provision(lo, rq, pos); case REQ_OP_WRITE: if (cmd->use_aio) return lo_rw_aio(lo, cmd, pos, ITER_SOURCE); @@ -754,6 +774,25 @@ static void loop_sysfs_exit(struct loop_device *lo) &loop_attribute_group); } +static void loop_config_provision(struct loop_device *lo) +{ + struct file *file = lo->lo_backing_file; + struct inode *inode = file->f_mapping->host; + + /* + * If the backing device is a block device, mirror its provisioning + * capability. + */ + if (S_ISBLK(inode->i_mode)) { + blk_queue_max_provision_sectors(lo->lo_queue, + bdev_max_provision_sectors(I_BDEV(inode))); + } else if (file->f_op->fallocate) { + blk_queue_max_provision_sectors(lo->lo_queue, UINT_MAX >> 9); + } else { + blk_queue_max_provision_sectors(lo->lo_queue, 0); + } +} + static void loop_config_discard(struct loop_device *lo) { struct file *file = lo->lo_backing_file; @@ -1092,6 +1131,7 @@ static int loop_configure(struct loop_device *lo, fmode_t mode, blk_queue_io_min(lo->lo_queue, bsize); loop_config_discard(lo); + loop_config_provision(lo); loop_update_rotational(lo); loop_update_dio(lo); loop_sysfs_init(lo); @@ -1304,6 +1344,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) } loop_config_discard(lo); + loop_config_provision(lo); /* update dio if lo_offset or transfer is changed */ __loop_update_dio(lo, lo->use_dio); @@ -1830,6 +1871,7 @@ static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx, case REQ_OP_FLUSH: case REQ_OP_DISCARD: case REQ_OP_WRITE_ZEROES: + case REQ_OP_PROVISION: cmd->use_aio = false; break; default:
Add support for provision requests to loopback devices. Loop devices will configure provision support based on whether the underlying block device/file can support the provision request and upon receiving a provision bio, will map it to the backing device/storage. For loop devices over files, a REQ_OP_PROVISION request will translate to an fallocate mode 0 call on the backing file. Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> --- drivers/block/loop.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)