| Message ID | 20230515172137.474626-1-afd@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status | expand |
On 12:21-20230515, Andrew Davis wrote: > Mailbox nodes are now disabled by default. The BeagleBoard AI64 DT > addition went in at around the same time and must have missed that > change so the mailboxes are not re-enabled. Do that here. Uggh. thanks. > > Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64") > Signed-off-by: Andrew Davis <afd@ti.com> > --- > arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts > index 37c24b077b6a..8a62ac263b89 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts > +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts > @@ -936,6 +936,7 @@ &ufs_wrapper { > }; > > &mailbox0_cluster0 { > + status = "okay"; > interrupts = <436>; > > mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { > @@ -950,6 +951,7 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { > }; > > &mailbox0_cluster1 { > + status = "okay"; > interrupts = <432>; > > mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { > @@ -964,6 +966,7 @@ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { > }; > > &mailbox0_cluster2 { > + status = "okay"; > interrupts = <428>; > > mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { > @@ -978,6 +981,7 @@ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { > }; > > &mailbox0_cluster3 { > + status = "okay"; > interrupts = <424>; > > mbox_c66_0: mbox-c66-0 { > @@ -992,6 +996,7 @@ mbox_c66_1: mbox-c66-1 { > }; > > &mailbox0_cluster4 { > + status = "okay"; > interrupts = <420>; > > mbox_c71_0: mbox-c71-0 { > -- > 2.39.2 > Reviewed-by: Nishanth Menon <nm@ti.com>
Hi Andrew Davis, On Mon, 15 May 2023 12:21:33 -0500, Andrew Davis wrote: > Mailbox nodes are now disabled by default. The BeagleBoard AI64 DT > addition went in at around the same time and must have missed that > change so the mailboxes are not re-enabled. Do that here. > > I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status commit: 155e7635ed1f3814d94d12556a3a0fed41d05b76 [2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes commit: a0cfd88d4a8a1106e9de5c3b03e68efe9e6249ec [3/5] arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level commit: 731c6deda85ffcac3629bea757a806306e335618 [4/5] arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level commit: 91f983ff7039fa2ff8ef153e118eec6d60f55e45 [5/5] arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level commit: b0efb45d126ee914bafca37a582ae6574560dd25 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git -- Vignesh
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index 37c24b077b6a..8a62ac263b89 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -936,6 +936,7 @@ &ufs_wrapper { }; &mailbox0_cluster0 { + status = "okay"; interrupts = <436>; mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { @@ -950,6 +951,7 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { }; &mailbox0_cluster1 { + status = "okay"; interrupts = <432>; mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { @@ -964,6 +966,7 @@ mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { }; &mailbox0_cluster2 { + status = "okay"; interrupts = <428>; mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { @@ -978,6 +981,7 @@ mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { }; &mailbox0_cluster3 { + status = "okay"; interrupts = <424>; mbox_c66_0: mbox-c66-0 { @@ -992,6 +996,7 @@ mbox_c66_1: mbox-c66-1 { }; &mailbox0_cluster4 { + status = "okay"; interrupts = <420>; mbox_c71_0: mbox-c71-0 {
Mailbox nodes are now disabled by default. The BeagleBoard AI64 DT addition went in at around the same time and must have missed that change so the mailboxes are not re-enabled. Do that here. Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64") Signed-off-by: Andrew Davis <afd@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 5 +++++ 1 file changed, 5 insertions(+)