diff mbox series

[v3] aacraid: reply queue mapping to CPUs based of IRQ affinity

Message ID 20230516001703.5384-1-sagar.biradar@microchip.com (mailing list archive)
State Superseded
Headers show
Series [v3] aacraid: reply queue mapping to CPUs based of IRQ affinity | expand

Commit Message

Sagar Biradar May 16, 2023, 12:17 a.m. UTC 
Fix the IO hang that arises because of MSIx vector not
having a mapped online CPU upon receiving completion.

The SCSI cmds take the blk_mq route, which is setup during the init.
The reserved cmds fetch the vector_no from mq_map after the init
is complete and before the init, they use 0 - as per the norm.

Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
---
 drivers/scsi/aacraid/aacraid.h  |  1 +
 drivers/scsi/aacraid/comminit.c |  2 +-
 drivers/scsi/aacraid/commsup.c  |  6 +++++-
 drivers/scsi/aacraid/linit.c    | 14 ++++++++++++++
 drivers/scsi/aacraid/src.c      | 25 +++++++++++++++++++++++--
 5 files changed, 44 insertions(+), 4 deletions(-)

Comments

John Garry May 17, 2023, 4:40 p.m. UTC | #1 
On 16/05/2023 01:17, Sagar Biradar wrote:
> Fix the IO hang that arises because of MSIx vector not
> having a mapped online CPU upon receiving completion.
> 
> The SCSI cmds take the blk_mq route, which is setup during the init.
> The reserved cmds fetch the vector_no from mq_map after the init
> is complete and before the init, they use 0 - as per the norm.
> 
> Reviewed-by: Gilbert Wu <gilbert.wu@microchip.com>
> Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>

this looks ok apart from minor issues, below, so fwiw:

Reviewed-by: John Garry <john.g.garry@oracle.com>

> ---
>   drivers/scsi/aacraid/aacraid.h  |  1 +
>   drivers/scsi/aacraid/comminit.c |  2 +-
>   drivers/scsi/aacraid/commsup.c  |  6 +++++-
>   drivers/scsi/aacraid/linit.c    | 14 ++++++++++++++
>   drivers/scsi/aacraid/src.c      | 25 +++++++++++++++++++++++--
>   5 files changed, 44 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
> index 5e115e8b2ba4..7c6efde75da6 100644
> --- a/drivers/scsi/aacraid/aacraid.h
> +++ b/drivers/scsi/aacraid/aacraid.h
> @@ -1678,6 +1678,7 @@ struct aac_dev
>   	u32			handle_pci_error;
>   	bool			init_reset;
>   	u8			soft_reset_support;
> +	u8			use_map_queue;
>   };
>   
>   #define aac_adapter_interrupt(dev) \
> diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
> index bd99c5492b7d..53924912417e 100644
> --- a/drivers/scsi/aacraid/comminit.c
> +++ b/drivers/scsi/aacraid/comminit.c
> @@ -630,6 +630,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
>   
>   	if (aac_is_src(dev))
>   		aac_define_int_mode(dev);
> +

stray new line

>   	/*
>   	 *	Ok now init the communication subsystem
>   	 */
> @@ -657,4 +658,3 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
>   
>   	return dev;
>   }
> -
> diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
> index deb32c9f4b3e..3f062e4013ab 100644
> --- a/drivers/scsi/aacraid/commsup.c
> +++ b/drivers/scsi/aacraid/commsup.c
> @@ -223,8 +223,12 @@ int aac_fib_setup(struct aac_dev * dev)
>   struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
>   {
>   	struct fib *fibptr;
> +	u32 blk_tag;
> +	int i;
>   
> -	fibptr = &dev->fibs[scsi_cmd_to_rq(scmd)->tag];
> +	blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
> +	i = blk_mq_unique_tag_to_tag(blk_tag);
> +	fibptr = &dev->fibs[i];
>   	/*
>   	 *	Null out fields that depend on being zero at the start of
>   	 *	each I/O
> diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
> index 5ba5c18b77b4..fa53a9b3341b 100644
> --- a/drivers/scsi/aacraid/linit.c
> +++ b/drivers/scsi/aacraid/linit.c
> @@ -34,6 +34,7 @@
>   #include <linux/delay.h>
>   #include <linux/kthread.h>
>   #include <linux/msdos_partition.h>
> +#include <linux/blk-mq-pci.h>

generally alphabetic ordering is preferred

>   
>   #include <scsi/scsi.h>
>   #include <scsi/scsi_cmnd.h>
> @@ -505,6 +506,15 @@ static int aac_slave_configure(struct scsi_device *sdev)
>   	return 0;
>   }
>   
> +static void aac_map_queues(struct Scsi_Host *shost)
> +{
> +	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;

this pattern happens a lot in the driver, so I suggest a separate change 
for a helper to do this

> +
> +	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
> +				aac->pdev, 0);
> +	aac->use_map_queue = true;
> +}
> +
>   /**
>    *	aac_change_queue_depth		-	alter queue depths
>    *	@sdev:	SCSI device we are considering
> @@ -1489,6 +1499,7 @@ static struct scsi_host_template aac_driver_template = {
>   	.bios_param			= aac_biosparm,
>   	.shost_groups			= aac_host_groups,
>   	.slave_configure		= aac_slave_configure,
> +	.map_queues			= aac_map_queues,
>   	.change_queue_depth		= aac_change_queue_depth,
>   	.sdev_groups			= aac_dev_groups,
>   	.eh_abort_handler		= aac_eh_abort,
> @@ -1776,6 +1787,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
>   	shost->max_lun = AAC_MAX_LUN;
>   
>   	pci_set_drvdata(pdev, shost);
> +	shost->nr_hw_queues = aac->max_msix;
> +	shost->host_tagset = 1;
>   
>   	error = scsi_add_host(shost, &pdev->dev);
>   	if (error)
> @@ -1908,6 +1921,7 @@ static void aac_remove_one(struct pci_dev *pdev)
>   	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
>   
>   	aac_cancel_rescan_worker(aac);
> +	aac->use_map_queue = false;
>   	scsi_remove_host(shost);
>   
>   	__aac_shutdown(aac);
> diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
> index 11ef58204e96..61949f374188 100644
> --- a/drivers/scsi/aacraid/src.c
> +++ b/drivers/scsi/aacraid/src.c
> @@ -493,6 +493,10 @@ static int aac_src_deliver_message(struct fib *fib)
>   #endif
>   
>   	u16 vector_no;
> +	struct scsi_cmnd *scmd;
> +	u32 blk_tag;
> +	struct Scsi_Host *shost = dev->scsi_host_ptr;
> +	struct blk_mq_queue_map *qmap;
>   
>   	atomic_inc(&q->numpending);
>   
> @@ -505,8 +509,25 @@ static int aac_src_deliver_message(struct fib *fib)
>   		if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
>   			&& dev->sa_firmware)
>   			vector_no = aac_get_vector(dev);
> -		else
> -			vector_no = fib->vector_no;
> +		else {
> +			if (!fib->vector_no || !fib->callback_data) {
> +				if (shost && dev->use_map_queue) {
> +					qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
> +					vector_no = qmap->mq_map[raw_smp_processor_id()];
> +				}
> +				/*
> +				 *	We hardcode the vector_no for
> +				 *	reserved commands as a valid shost is
> +				 *	absent during the init

you prob have another way to check this without the need for 
dev->use_map_queue - that's just a guess

> +				 */
> +				else
> +					vector_no = 0;
> +			} else {
> +				scmd = (struct scsi_cmnd *)fib->callback_data;
> +				blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
> +				vector_no = blk_mq_unique_tag_to_hwq(blk_tag);
> +			}
> +		}
>   
>   		if (native_hba) {
>   			if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {
diff mbox series

Patch

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 5e115e8b2ba4..7c6efde75da6 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1678,6 +1678,7 @@  struct aac_dev
 	u32			handle_pci_error;
 	bool			init_reset;
 	u8			soft_reset_support;
+	u8			use_map_queue;
 };
 
 #define aac_adapter_interrupt(dev) \
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index bd99c5492b7d..53924912417e 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -630,6 +630,7 @@  struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 
 	if (aac_is_src(dev))
 		aac_define_int_mode(dev);
+
 	/*
 	 *	Ok now init the communication subsystem
 	 */
@@ -657,4 +658,3 @@  struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 
 	return dev;
 }
-
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index deb32c9f4b3e..3f062e4013ab 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -223,8 +223,12 @@  int aac_fib_setup(struct aac_dev * dev)
 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
 {
 	struct fib *fibptr;
+	u32 blk_tag;
+	int i;
 
-	fibptr = &dev->fibs[scsi_cmd_to_rq(scmd)->tag];
+	blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+	i = blk_mq_unique_tag_to_tag(blk_tag);
+	fibptr = &dev->fibs[i];
 	/*
 	 *	Null out fields that depend on being zero at the start of
 	 *	each I/O
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5ba5c18b77b4..fa53a9b3341b 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -34,6 +34,7 @@ 
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/msdos_partition.h>
+#include <linux/blk-mq-pci.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -505,6 +506,15 @@  static int aac_slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
+static void aac_map_queues(struct Scsi_Host *shost)
+{
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+				aac->pdev, 0);
+	aac->use_map_queue = true;
+}
+
 /**
  *	aac_change_queue_depth		-	alter queue depths
  *	@sdev:	SCSI device we are considering
@@ -1489,6 +1499,7 @@  static struct scsi_host_template aac_driver_template = {
 	.bios_param			= aac_biosparm,
 	.shost_groups			= aac_host_groups,
 	.slave_configure		= aac_slave_configure,
+	.map_queues			= aac_map_queues,
 	.change_queue_depth		= aac_change_queue_depth,
 	.sdev_groups			= aac_dev_groups,
 	.eh_abort_handler		= aac_eh_abort,
@@ -1776,6 +1787,8 @@  static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_lun = AAC_MAX_LUN;
 
 	pci_set_drvdata(pdev, shost);
+	shost->nr_hw_queues = aac->max_msix;
+	shost->host_tagset = 1;
 
 	error = scsi_add_host(shost, &pdev->dev);
 	if (error)
@@ -1908,6 +1921,7 @@  static void aac_remove_one(struct pci_dev *pdev)
 	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
 
 	aac_cancel_rescan_worker(aac);
+	aac->use_map_queue = false;
 	scsi_remove_host(shost);
 
 	__aac_shutdown(aac);
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 11ef58204e96..61949f374188 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -493,6 +493,10 @@  static int aac_src_deliver_message(struct fib *fib)
 #endif
 
 	u16 vector_no;
+	struct scsi_cmnd *scmd;
+	u32 blk_tag;
+	struct Scsi_Host *shost = dev->scsi_host_ptr;
+	struct blk_mq_queue_map *qmap;
 
 	atomic_inc(&q->numpending);
 
@@ -505,8 +509,25 @@  static int aac_src_deliver_message(struct fib *fib)
 		if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
 			&& dev->sa_firmware)
 			vector_no = aac_get_vector(dev);
-		else
-			vector_no = fib->vector_no;
+		else {
+			if (!fib->vector_no || !fib->callback_data) {
+				if (shost && dev->use_map_queue) {
+					qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
+					vector_no = qmap->mq_map[raw_smp_processor_id()];
+				}
+				/*
+				 *	We hardcode the vector_no for
+				 *	reserved commands as a valid shost is
+				 *	absent during the init
+				 */
+				else
+					vector_no = 0;
+			} else {
+				scmd = (struct scsi_cmnd *)fib->callback_data;
+				blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+				vector_no = blk_mq_unique_tag_to_hwq(blk_tag);
+			}
+		}
 
 		if (native_hba) {
 			if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {