| Message ID | 20230414045542.3249939-1-danishanwar@ti.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Introduce PRU platform consumer API | expand |
Hi MD Danish Anwar, On Fri, 14 Apr 2023 10:25:38 +0530, MD Danish Anwar wrote: > The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS > or simply PRUSS) on various TI SoCs consists of dual 32-bit RISC cores > (Programmable Real-Time Units, or PRUs) for program execution. > > There are 3 foundation components for TI PRUSS subsystem: the PRUSS platform > driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All of them have > already been merged and can be found under: > 1) drivers/soc/ti/pruss.c > Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml > 2) drivers/irqchip/irq-pruss-intc.c > Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml > 3) drivers/remoteproc/pru_rproc.c > Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml > > [...] I have applied the following to branch ti-drivers-soc-next on [1]. Thank you for your patience in following up and incorporating all the fixes and the multiple hand-overs! [1/4] soc: ti: pruss: Add pruss_get()/put() API commit: 67d1b0a1030fb20d54b720df6e976c06b893fb00 [2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API commit: b789ca1e3380ab63b60c3356c026a7e8eb26ba01 [3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs commit: 51b5760e56ef19106a3c4487a66d186d46ccc6f4 [4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR commit: 0211cc1e4fbbc81853227147bf0982c47362c567 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Hi All, The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS or simply PRUSS) on various TI SoCs consists of dual 32-bit RISC cores (Programmable Real-Time Units, or PRUs) for program execution. There are 3 foundation components for TI PRUSS subsystem: the PRUSS platform driver, the PRUSS INTC driver and the PRUSS remoteproc driver. All of them have already been merged and can be found under: 1) drivers/soc/ti/pruss.c Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml 2) drivers/irqchip/irq-pruss-intc.c Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml 3) drivers/remoteproc/pru_rproc.c Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. Example of a PRU consumer drivers will be: - Software UART over PRUSS - PRU-ICSS Ethernet EMAC In order to make usage of common PRU resources and allow the consumer drivers to configure the PRU hardware for specific usage the PRU API is introduced. This is the v9 of the old patch series [11]. Changes from v8 [11] to v9: *) Added Mathieu's Acked by in first two patches. *) Removed variable initialization from pruss_cfg_get_gpmux() API. *) Removed pru_id < 0 if condition from pruss_cfg_get_gpmux() / set () APIs. *) Removed initialization from enum pruss_gp_mux_sel, pruss_gpi_mode and pru_type. *) Removed pru_id < 0 and mode < 0 checks from pruss_cfg_gpimode() API. Changes from v7 [10] to v8: *) Addressed Mathieu's comments and moved pruss related API definitions to linux/pruss_driver.h *) Moved enum pruss_mem, pruss_gp_mux_sel, pruss_gpi_mode, pru_type and struct pruss_mem_region from remoteproc/pruss.h to linux/pruss_driver.h as asked by Mathieu. Changes from v6 [9] to v7: *) Addressed Simon's comment on patch 3 of this series and dropped unnecassary macros from the patch. Changes from v5 [1] to v6: *) Added Reviewed by tags of Roger and Tony to the patches. *) Added Acked by tag of Mathieu to patch 2 of this series. *) Added NULL check for @mux in pruss_cfg_get_gpmux() API. *) Added comment to the pruss_get() function documentation mentioning it is expected the caller will have done a pru_rproc_get() on @rproc. *) Fixed compilation warning "warning: ‘pruss_cfg_update’ defined but not used" in patch 3 by squashing patch 3 [7] and patch 5 [8] of previous revision together. Squashed patch 5 instead of patch 4 with patch 3 because patch 5 uses both read() and update() APIs where as patch 4 only uses update() API. Previously pruss_cfg_read()/update() APIs were intoroduced in patch 3 and used in patch 4 and 5. Now these APIs are introduced as well as used in patch 3. Changes from v4 [2] to v5: *) Addressed Roger's comment to change function argument in API pruss_cfg_xfr_enable(). Instead of asking user to calcualte mask, now user will just provide the pru_type and mask will be calcualted inside the API. *) Moved enum pru_type from pru_rproc.c to include/linux/remoteproc/pruss.h in patch 4 / 5. *) Moved enum pruss_gpi_mode from patch 3/5 to patch 4/5 to introduce this enum in same patch as the API using it. *) Moved enum pruss_gp_mux_sel from patch 3/5 to patch 5/5 to introduce this enum in same patch as the API using it. *) Created new headefile drivers/soc/ti/pruss.h, private to PRUSS as asked by Roger. Moved all private definitions and pruss_cfg_read () / update () APIs to this newly added headerfile. *) Renamed include/linux/pruss_driver.h to include/linux/pruss_internal.h as suggested by Andrew and Roger. Changes from v3 [3] to v4: *) Added my SoB tags in all patches as earlier SoB tags were missing in few patches. *) Added Roger's RB tags in 3 patches. *) Addressed Roger's comment in patch 4/5 of this series. Added check for invalid GPI mode in pruss_cfg_gpimode() API. *) Removed patch [4] from this series as that patch is no longer required. *) Made pruss_cfg_read() and pruss_cfg_update() APIs internal to pruss.c by removing EXPORT_SYMBOL_GPL and making them static. Now these APIs are internal to pruss.c and PRUSS CFG space is not exposed. *) Moved APIs pruss_cfg_gpimode(), pruss_cfg_miirt_enable(), pruss_cfg_xfr_enable(), pruss_cfg_get_gpmux(), pruss_cfg_set_gpmux() to pruss.c file as they are using APIs pruss_cfg_read / update. Defined these APIs in pruss.h file as other drivers use these APIs to perform respective operations. Changes from v2 to v3: *) No functional changes, the old series has been rebased on linux-next (tag: next-20230306). This series depends on another series which is already merged in the remoteproc tree [5] and is part of v6.3-rc1. This series and the remoteproc series form the PRUSS consumer API which can be used by consumer drivers to utilize the PRUs. One example of the consumer driver is the PRU-ICSSG ethernet driver [6],which depends on this series and the remoteproc series [5]. [1] https://lore.kernel.org/all/20230323062451.2925996-1-danishanwar@ti.com/ [2] https://lore.kernel.org/all/20230313111127.1229187-1-danishanwar@ti.com/ [3] https://lore.kernel.org/all/20230306110934.2736465-1-danishanwar@ti.com/ [4] https://lore.kernel.org/all/20230306110934.2736465-6-danishanwar@ti.com/ [5] https://lore.kernel.org/all/20230106121046.886863-1-danishanwar@ti.com/#t [6] https://lore.kernel.org/all/20230210114957.2667963-1-danishanwar@ti.com/ [7] https://lore.kernel.org/all/20230323062451.2925996-4-danishanwar@ti.com/ [8] https://lore.kernel.org/all/20230323062451.2925996-6-danishanwar@ti.com/ [9] https://lore.kernel.org/all/20230331112941.823410-1-danishanwar@ti.com/ [10] https://lore.kernel.org/all/20230404115336.599430-1-danishanwar@ti.com/ [11] https://lore.kernel.org/all/20230412103012.1754161-1-danishanwar@ti.com/ Thanks and Regards, Md Danish Anwar Andrew F. Davis (1): soc: ti: pruss: Add pruss_{request,release}_mem_region() API Suman Anna (2): soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR Tero Kristo (1): soc: ti: pruss: Add pruss_get()/put() API drivers/remoteproc/pru_rproc.c | 15 -- drivers/soc/ti/pruss.c | 255 +++++++++++++++++++++++++++++++++ drivers/soc/ti/pruss.h | 88 ++++++++++++ include/linux/pruss_driver.h | 123 ++++++++++++++++ 4 files changed, 466 insertions(+), 15 deletions(-) create mode 100644 drivers/soc/ti/pruss.h