diff mbox series

[v3,2/3] dt-bindings: PCI: xilinx-xdma: Add YAML schemas for Xilinx XDMA PCIe Root Port Bridge

Message ID 20230519105901.2399452-3-thippeswamy.havalige@amd.com (mailing list archive)
State New, archived
Headers show
Series Add support for Xilinx XDMA Soft IP as Root Port. | expand

Commit Message

Thippeswamy Havalige May 19, 2023, 10:59 a.m. UTC 
Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge
dt binding.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
---
changes for v3:
- Fixed compatible string issue.
- Modified ranges property description to maxItems.
- Modified address-cell property of interrupt-controller child node.
changes for v2:
- None
 .../bindings/pci/xlnx,xdma-host.yaml          | 114 ++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml

Comments

Conor Dooley May 19, 2023, 7:13 p.m. UTC | #1 
On Fri, May 19, 2023 at 04:29:00PM +0530, Thippeswamy Havalige wrote:
> Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>

Looks like you might've forgotten a Co-developed-by?

> diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml

> +properties:
> +  compatible:
> +    const: xlnx,xdma-host-3.00

Perhaps not a question for you Thippeswamy, but is there a reason for
PCI root ports not having any soc-specific compatibles? Rob (if you see
this when you're back)?

> +                interrupt-controller ;

Looks like you didn't see Michal's comment about the extra space.
If you resubmit for some other reason, you should fix that in the
process :)

Cheers,
Conor.
Thippeswamy Havalige May 31, 2023, 6:59 a.m. UTC | #2 
Hi Conor Dooley,

Please find inline response.

Regards,
Thippeswamy H
> 
> > +properties:
> > +  compatible:
> > +    const: xlnx,xdma-host-3.00
> 
> Perhaps not a question for you Thippeswamy, but is there a reason for PCI
> root ports not having any soc-specific compatibles? Rob (if you see this when
> you're back)?
> 
> > +                interrupt-controller ;
> 
> Looks like you didn't see Michal's comment about the extra space.
> If you resubmit for some other reason, you should fix that in the process :)
- Agreed, Will fix it in next patch.
> Cheers,
> Conor.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
new file mode 100644
index 000000000000..ec46712c3e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
@@ -0,0 +1,114 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx XDMA PL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xdma-host-3.00
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received.
+      - description: msi0 interrupt asserted when an MSI is received.
+      - description: msi1 interrupt asserted when an MSI is received.
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: msi0
+      - const: msi1
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  interrupt-map:
+    maxItems: 4
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@a0000000 {
+            compatible = "xlnx,xdma-host-3.00";
+            reg = <0x0 0xa0000000 0x0 0x10000000>;
+            ranges = <0x2000000 0x0 0xB0000000 0x0 0xB0000000 0x0 0x1000000>,
+                     <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "msi0", "msi1";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                            <0 0 0 2 &pcie_intc_0 1>,
+                            <0 0 0 3 &pcie_intc_0 2>,
+                            <0 0 0 4 &pcie_intc_0 3>;
+            pcie_intc_0: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller ;
+            };
+        };
+    };