| Message ID | 20230523142912.2086985-4-lukma@denx.de (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | dsa: marvell: Add support for mv88e6071 and 6020 switches | expand |
On Tue, May 23, 2023 at 04:29:12PM +0200, Lukasz Majewski wrote: > A mv88e6250 family (i.e. "LinkStreet") switch with 5 internal PHYs, > 2 RMIIs and no PTP support. chip.h says: MV88E6XXX_FAMILY_6250, /* 6220 6250 */ Please update this comment. I would also suggest you don't call the mv88e6250 family "LinkStreet". All Marvell SoHo switches are LinkStreet, all switches supported by the mv88e6xxx driver are "LinkStreet". With these changes: Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew --- pw-bot: cr
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 9cb76a5b8ff5..8d4c1ab4c85d 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -5663,6 +5663,26 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .ops = &mv88e6250_ops, }, + [MV88E6071] = { + .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6071, + .family = MV88E6XXX_FAMILY_6250, + .name = "Marvell 88E6071", + .num_databases = 64, + .num_ports = 7, + .num_internal_phys = 5, + .max_vid = 4095, + .port_base_addr = 0x08, + .phy_base_addr = 0x00, + .global1_addr = 0x0f, + .global2_addr = 0x07, + .age_time_coeff = 15000, + .g1_irqs = 9, + .g2_irqs = 5, + .atu_move_port_mask = 0xf, + .dual_chip = true, + .ops = &mv88e6250_ops, + }, + [MV88E6085] = { .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6085, .family = MV88E6XXX_FAMILY_6097, diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 4cfb16375deb..128715df5772 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -55,6 +55,7 @@ enum mv88e6xxx_frame_mode { /* List of supported models */ enum mv88e6xxx_model { MV88E6020, + MV88E6071, MV88E6085, MV88E6095, MV88E6097, diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index 56efba08abdc..e423ef13a827 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -112,6 +112,7 @@ #define MV88E6XXX_PORT_SWITCH_ID 0x03 #define MV88E6XXX_PORT_SWITCH_ID_PROD_MASK 0xfff0 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6020 0x0200 +#define MV88E6XXX_PORT_SWITCH_ID_PROD_6071 0x0710 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6085 0x04a0 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6095 0x0950 #define MV88E6XXX_PORT_SWITCH_ID_PROD_6097 0x0990
A mv88e6250 family (i.e. "LinkStreet") switch with 5 internal PHYs, 2 RMIIs and no PTP support. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- Changes for v2: - Update commit message - Add information about max frame size Changes for v3: - None Changes for v4: - None Changes for v5: - None Changes for v6: - Reorder patches for better readiness Changes for v7: - Provide just support for this IC (remove the part with setting max frame info as it is not needed anymore) --- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++++++ drivers/net/dsa/mv88e6xxx/chip.h | 1 + drivers/net/dsa/mv88e6xxx/port.h | 1 + 3 files changed, 22 insertions(+)