| Message ID | 20230524083033.486490-3-jstephan@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | phy: mtk-mipi-csi: add driver for CSI phy | expand |
Il 24/05/23 10:30, Julien Stephan ha scritto: > From: Florian Sylvestre <fsylvestre@baylibre.com> > > This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in > some Mediatek soc, such as the mt8365 > > Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> > Signed-off-by: Julien Stephan <jstephan@baylibre.com> > --- > .../bindings/phy/mediatek,mt8365-csi-rx.yaml | 67 +++++++++++++++++++ > MAINTAINERS | 6 ++ > 2 files changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > new file mode 100644 > index 000000000000..a1bd96a98051 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2023 MediaTek, BayLibre > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek Sensor Interface MIPI CSI CD-PHY > + > +maintainers: > + - Julien Stephan <jstephan@baylibre.com> > + - Andy Hsieh <andy.hsieh@mediatek.com> > + > +description: > + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 > + receivers. The number of PHYs depends on the SoC model. > + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only > + capable. > + > +properties: > + compatible: > + enum: > + - mediatek,mt8365-csi-rx > + > + reg: > + maxItems: 1 > + > + '#phy-cells': > + const: 0 > + > + mediatek,phy-type: Instead of declaring a phy-type here like this, can't we instead declare that in the phy cells, like we're doing with MTK TPHY and like other non-MediaTek PHYs are already doing? device { ... phys = <&csi0_rx PHY_TYPE_CDPHY>; ... } Regards, Angelo
On Wed, May 24, 2023 at 11:45:30AM +0200, AngeloGioacchino Del Regno wrote: > Il 24/05/23 10:30, Julien Stephan ha scritto: > > From: Florian Sylvestre <fsylvestre@baylibre.com> > > > > This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in > > some Mediatek soc, such as the mt8365 > > > > Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> > > Signed-off-by: Julien Stephan <jstephan@baylibre.com> > > --- > > .../bindings/phy/mediatek,mt8365-csi-rx.yaml | 67 +++++++++++++++++++ > > MAINTAINERS | 6 ++ > > 2 files changed, 73 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > new file mode 100644 > > index 000000000000..a1bd96a98051 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +# Copyright (c) 2023 MediaTek, BayLibre > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Mediatek Sensor Interface MIPI CSI CD-PHY > > + > > +maintainers: > > + - Julien Stephan <jstephan@baylibre.com> > > + - Andy Hsieh <andy.hsieh@mediatek.com> > > + > > +description: > > + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 > > + receivers. The number of PHYs depends on the SoC model. > > + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only > > + capable. > > + > > +properties: > > + compatible: > > + enum: > > + - mediatek,mt8365-csi-rx > > + > > + reg: > > + maxItems: 1 > > + > > + '#phy-cells': > > + const: 0 > > + > > + mediatek,phy-type: > > Instead of declaring a phy-type here like this, can't we instead declare that in > the phy cells, like we're doing with MTK TPHY and like other non-MediaTek PHYs are > already doing? > > device { > ... > phys = <&csi0_rx PHY_TYPE_CDPHY>; > ... > } > > Regards, > Angelo > > Hi Angelo, This is a hardware property that is not dynamic, so IMHO it doesn't make sense to use phy argument for that. Some driver already use a 'phy-type' property (such as phy-cadence-torrent.yaml). I was thinking of using phy argument on future upgrade when driver will support D-PHY and C-PHY modes so the phy user will be able to choose the mode. Does it makes sense? Best Julien
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml new file mode 100644 index 000000000000..a1bd96a98051 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface MIPI CSI CD-PHY + +maintainers: + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 + receivers. The number of PHYs depends on the SoC model. + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only + capable. + +properties: + compatible: + enum: + - mediatek,mt8365-csi-rx + + reg: + maxItems: 1 + + '#phy-cells': + const: 0 + + mediatek,phy-type: + description: + Specify the phy type. Supported phy are D-PHY only or CD-PHY capable phys. + See include/dt-bindings/phy/phy.h for constants. + enum: [10, 13] + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - mediatek,phy-type + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + csi0_rx: phy@11c10000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c10000 0 0x2000>; + mediatek,phy-type = <PHY_TYPE_CDPHY>; + #phy-cells = <0>; + }; + + csi1_rx: phy@11c12000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c12000 0 0x2000>; + mediatek,phy-type = <PHY_TYPE_DPHY>; + #phy-cells = <0>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index b81e9fcc66cb..5da594fbb761 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13184,6 +13184,12 @@ F: Documentation/devicetree/bindings/media/mediatek-vpu.txt F: drivers/media/platform/mediatek/vcodec/ F: drivers/media/platform/mediatek/vpu/ +MEDIATEK MIPI-CSI CDPHY DRIVER +M: Julien Stephan <jstephan@baylibre.com> +M: Andy Hsieh <andy.hsieh@mediatek.com> +S: Supported +F: Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml + MEDIATEK MMC/SD/SDIO DRIVER M: Chaotian Jing <chaotian.jing@mediatek.com> S: Maintained