Message ID | 20230525212712.255406-1-shreeya.patel@collabora.com (mailing list archive) |
---|---|
Headers | show |
Series | RK3588 ADC support | expand |
On Fri, 26 May 2023 02:57:04 +0530 Shreeya Patel <shreeya.patel@collabora.com> wrote: > This patch series adds ADC support for RK3588 and updates > the DT bindings for the same. > > To test ADC support on Rock 5B board, a voltage divider circuit > was created using the gpio pin 22 ( SARADC_IN4 ) and few more > tests were ran for testing the buffer and trigger support using > the iio_generic_buffer tool. > FWIW I don't have any additional comments on this beyond agreeing those made by others need addressing. Fingers crossed for v3. Jonathan > > Changes in v2 > - Add from address in patches 1 and 2. > - Create separate patches for adding new device support and changes to > the old device code. > - Make use of FIELD_PREP in patch 2. > - Move the enablement of clocks at it's original position in patch 3 > - Add Reviewed-by tag in patches 4 and 5. > - Add an Acked-by tag in patch 8. > > Shreeya Patel (8): > iio: adc: rockchip_saradc: Add callback functions > iio: adc: rockchip_saradc: Add support for RK3588 > iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled > iio: adc: rockchip_saradc: Use of_device_get_match_data > iio: adc: rockchip_saradc: Match alignment with open parenthesis > iio: adc: rockchip_saradc: Use dev_err_probe > arm64: dts: rockchip: Add DT node for ADC support in RK3588 > dt-bindings: iio: adc: Add rockchip,rk3588-saradc string > > .../bindings/iio/adc/rockchip-saradc.yaml | 1 + > arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + > drivers/iio/adc/rockchip_saradc.c | 262 +++++++++++------- > 3 files changed, 168 insertions(+), 107 deletions(-) >
On 28/05/23 22:16, Jonathan Cameron wrote: > On Fri, 26 May 2023 02:57:04 +0530 > Shreeya Patel <shreeya.patel@collabora.com> wrote: > >> This patch series adds ADC support for RK3588 and updates >> the DT bindings for the same. >> >> To test ADC support on Rock 5B board, a voltage divider circuit >> was created using the gpio pin 22 ( SARADC_IN4 ) and few more >> tests were ran for testing the buffer and trigger support using >> the iio_generic_buffer tool. >> > FWIW I don't have any additional comments on this beyond agreeing > those made by others need addressing. > > Fingers crossed for v3. Thanks Jonathan, I'll send a v3 after making the changes mentioned by Dmitry and Angelo. Regards, Shreeya Patel > > Jonathan > >> Changes in v2 >> - Add from address in patches 1 and 2. >> - Create separate patches for adding new device support and changes to >> the old device code. >> - Make use of FIELD_PREP in patch 2. >> - Move the enablement of clocks at it's original position in patch 3 >> - Add Reviewed-by tag in patches 4 and 5. >> - Add an Acked-by tag in patch 8. >> >> Shreeya Patel (8): >> iio: adc: rockchip_saradc: Add callback functions >> iio: adc: rockchip_saradc: Add support for RK3588 >> iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled >> iio: adc: rockchip_saradc: Use of_device_get_match_data >> iio: adc: rockchip_saradc: Match alignment with open parenthesis >> iio: adc: rockchip_saradc: Use dev_err_probe >> arm64: dts: rockchip: Add DT node for ADC support in RK3588 >> dt-bindings: iio: adc: Add rockchip,rk3588-saradc string >> >> .../bindings/iio/adc/rockchip-saradc.yaml | 1 + >> arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 12 + >> drivers/iio/adc/rockchip_saradc.c | 262 +++++++++++------- >> 3 files changed, 168 insertions(+), 107 deletions(-) >> >