Message ID | 20230308-msm8226-mdp-v1-4-679f335d3d5b@z3ntu.xyz (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Display support for MSM8226 | expand |
On 29.05.2023 11:44, Luca Weiss wrote: > Add the required config for the v1.1 MDP5 found on MSM8226. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 82 ++++++++++++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > > diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c > index 2eec2d78f32a..694d54341337 100644 > --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c > +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c > @@ -103,6 +103,87 @@ static const struct mdp5_cfg_hw msm8x74v1_config = { > .max_clk = 200000000, > }; > > +static const struct mdp5_cfg_hw msm8x26_config = { Luca, this patch looks good as-is (without diving into the values). Dmitry, I see some things that we may improve here.. 1. Rename msm8xab to msm89ab or something, it's really inconsistent with other drivers 2. Some values seem very common / always constant.. perhaps we could add some #defines like we do in DPU? 3. Can we add some magic defines to make flush_hw_mask non-cryptic? 4. We can probably use pointers in data structs and deduplicate identical blocks! Konrad > + .name = "msm8x26", > + .mdp = { > + .count = 1, > + .caps = MDP_CAP_SMP | > + 0, > + }, > + .smp = { > + .mmb_count = 7, > + .mmb_size = 4096, > + .clients = { > + [SSPP_VIG0] = 1, > + [SSPP_DMA0] = 4, > + [SSPP_RGB0] = 7, > + }, > + }, > + .ctl = { > + .count = 2, > + .base = { 0x00500, 0x00600 }, > + .flush_hw_mask = 0x0003ffff, > + }, > + .pipe_vig = { > + .count = 1, > + .base = { 0x01100 }, > + .caps = MDP_PIPE_CAP_HFLIP | > + MDP_PIPE_CAP_VFLIP | > + MDP_PIPE_CAP_SCALE | > + MDP_PIPE_CAP_CSC | > + 0, > + }, > + .pipe_rgb = { > + .count = 1, > + .base = { 0x01d00 }, > + .caps = MDP_PIPE_CAP_HFLIP | > + MDP_PIPE_CAP_VFLIP | > + MDP_PIPE_CAP_SCALE | > + 0, > + }, > + .pipe_dma = { > + .count = 1, > + .base = { 0x02900 }, > + .caps = MDP_PIPE_CAP_HFLIP | > + MDP_PIPE_CAP_VFLIP | > + 0, > + }, > + .lm = { > + .count = 2, > + .base = { 0x03100, 0x03d00 }, > + .instances = { > + { .id = 0, .pp = 0, .dspp = 0, > + .caps = MDP_LM_CAP_DISPLAY, }, > + { .id = 1, .pp = -1, .dspp = -1, > + .caps = MDP_LM_CAP_WB }, > + }, > + .nb_stages = 2, > + .max_width = 2048, > + .max_height = 0xFFFF, > + }, > + .dspp = { > + .count = 1, > + .base = { 0x04500 }, > + }, > + .pp = { > + .count = 1, > + .base = { 0x21a00 }, > + }, > + .intf = { > + .base = { 0x00000, 0x21200 }, > + .connect = { > + [0] = INTF_DISABLED, > + [1] = INTF_DSI, > + }, > + }, > + .perf = { > + .ab_inefficiency = 100, > + .ib_inefficiency = 200, > + .clk_inefficiency = 125 > + }, > + .max_clk = 200000000, > +}; > + > static const struct mdp5_cfg_hw msm8x74v2_config = { > .name = "msm8x74", > .mdp = { > @@ -1236,6 +1317,7 @@ static const struct mdp5_cfg_hw sdm660_config = { > > static const struct mdp5_cfg_handler cfg_handlers_v1[] = { > { .revision = 0, .config = { .hw = &msm8x74v1_config } }, > + { .revision = 1, .config = { .hw = &msm8x26_config } }, > { .revision = 2, .config = { .hw = &msm8x74v2_config } }, > { .revision = 3, .config = { .hw = &apq8084_config } }, > { .revision = 6, .config = { .hw = &msm8x16_config } }, >
On 29/05/2023 12:44, Luca Weiss wrote: > Add the required config for the v1.1 MDP5 found on MSM8226. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 82 ++++++++++++++++++++++++++++++++ > 1 file changed, 82 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On 29/05/2023 14:59, Konrad Dybcio wrote: > > > On 29.05.2023 11:44, Luca Weiss wrote: >> Add the required config for the v1.1 MDP5 found on MSM8226. >> >> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> >> --- >> drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 82 ++++++++++++++++++++++++++++++++ >> 1 file changed, 82 insertions(+) >> >> diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c >> index 2eec2d78f32a..694d54341337 100644 >> --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c >> +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c >> @@ -103,6 +103,87 @@ static const struct mdp5_cfg_hw msm8x74v1_config = { >> .max_clk = 200000000, >> }; >> >> +static const struct mdp5_cfg_hw msm8x26_config = { > Luca, this patch looks good as-is (without diving into the values). > > Dmitry, I see some things that we may improve here.. > > 1. Rename msm8xab to msm89ab or something, it's really inconsistent > with other drivers > > 2. Some values seem very common / always constant.. perhaps we could > add some #defines like we do in DPU? I really would not like to go the DPU way here. Maybe we can define the 'full-featured' masks, while leaving the older hardware intact. > 3. Can we add some magic defines to make flush_hw_mask non-cryptic? Sounds like a good idea, especially since we have all the defines. I'll tend to it after landing 8226. > > 4. We can probably use pointers in data structs and deduplicate identical > blocks! Let's see. > > Konrad >> + .name = "msm8x26", >> + .mdp = { >> + .count = 1, >> + .caps = MDP_CAP_SMP | >> + 0, >> + }, >> + .smp = { >> + .mmb_count = 7, >> + .mmb_size = 4096, >> + .clients = { >> + [SSPP_VIG0] = 1, >> + [SSPP_DMA0] = 4, >> + [SSPP_RGB0] = 7, >> + }, >> + }, >> + .ctl = { >> + .count = 2, >> + .base = { 0x00500, 0x00600 }, >> + .flush_hw_mask = 0x0003ffff, >> + }, >> + .pipe_vig = { >> + .count = 1, >> + .base = { 0x01100 }, >> + .caps = MDP_PIPE_CAP_HFLIP | >> + MDP_PIPE_CAP_VFLIP | >> + MDP_PIPE_CAP_SCALE | >> + MDP_PIPE_CAP_CSC | >> + 0, >> + }, >> + .pipe_rgb = { >> + .count = 1, >> + .base = { 0x01d00 }, >> + .caps = MDP_PIPE_CAP_HFLIP | >> + MDP_PIPE_CAP_VFLIP | >> + MDP_PIPE_CAP_SCALE | >> + 0, >> + }, >> + .pipe_dma = { >> + .count = 1, >> + .base = { 0x02900 }, >> + .caps = MDP_PIPE_CAP_HFLIP | >> + MDP_PIPE_CAP_VFLIP | >> + 0, >> + }, >> + .lm = { >> + .count = 2, >> + .base = { 0x03100, 0x03d00 }, >> + .instances = { >> + { .id = 0, .pp = 0, .dspp = 0, >> + .caps = MDP_LM_CAP_DISPLAY, }, >> + { .id = 1, .pp = -1, .dspp = -1, >> + .caps = MDP_LM_CAP_WB }, >> + }, >> + .nb_stages = 2, >> + .max_width = 2048, >> + .max_height = 0xFFFF, >> + }, >> + .dspp = { >> + .count = 1, >> + .base = { 0x04500 }, >> + }, >> + .pp = { >> + .count = 1, >> + .base = { 0x21a00 }, >> + }, >> + .intf = { >> + .base = { 0x00000, 0x21200 }, >> + .connect = { >> + [0] = INTF_DISABLED, >> + [1] = INTF_DSI, >> + }, >> + }, >> + .perf = { >> + .ab_inefficiency = 100, >> + .ib_inefficiency = 200, >> + .clk_inefficiency = 125 >> + }, >> + .max_clk = 200000000, >> +}; >> + >> static const struct mdp5_cfg_hw msm8x74v2_config = { >> .name = "msm8x74", >> .mdp = { >> @@ -1236,6 +1317,7 @@ static const struct mdp5_cfg_hw sdm660_config = { >> >> static const struct mdp5_cfg_handler cfg_handlers_v1[] = { >> { .revision = 0, .config = { .hw = &msm8x74v1_config } }, >> + { .revision = 1, .config = { .hw = &msm8x26_config } }, >> { .revision = 2, .config = { .hw = &msm8x74v2_config } }, >> { .revision = 3, .config = { .hw = &apq8084_config } }, >> { .revision = 6, .config = { .hw = &msm8x16_config } }, >>
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c index 2eec2d78f32a..694d54341337 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c @@ -103,6 +103,87 @@ static const struct mdp5_cfg_hw msm8x74v1_config = { .max_clk = 200000000, }; +static const struct mdp5_cfg_hw msm8x26_config = { + .name = "msm8x26", + .mdp = { + .count = 1, + .caps = MDP_CAP_SMP | + 0, + }, + .smp = { + .mmb_count = 7, + .mmb_size = 4096, + .clients = { + [SSPP_VIG0] = 1, + [SSPP_DMA0] = 4, + [SSPP_RGB0] = 7, + }, + }, + .ctl = { + .count = 2, + .base = { 0x00500, 0x00600 }, + .flush_hw_mask = 0x0003ffff, + }, + .pipe_vig = { + .count = 1, + .base = { 0x01100 }, + .caps = MDP_PIPE_CAP_HFLIP | + MDP_PIPE_CAP_VFLIP | + MDP_PIPE_CAP_SCALE | + MDP_PIPE_CAP_CSC | + 0, + }, + .pipe_rgb = { + .count = 1, + .base = { 0x01d00 }, + .caps = MDP_PIPE_CAP_HFLIP | + MDP_PIPE_CAP_VFLIP | + MDP_PIPE_CAP_SCALE | + 0, + }, + .pipe_dma = { + .count = 1, + .base = { 0x02900 }, + .caps = MDP_PIPE_CAP_HFLIP | + MDP_PIPE_CAP_VFLIP | + 0, + }, + .lm = { + .count = 2, + .base = { 0x03100, 0x03d00 }, + .instances = { + { .id = 0, .pp = 0, .dspp = 0, + .caps = MDP_LM_CAP_DISPLAY, }, + { .id = 1, .pp = -1, .dspp = -1, + .caps = MDP_LM_CAP_WB }, + }, + .nb_stages = 2, + .max_width = 2048, + .max_height = 0xFFFF, + }, + .dspp = { + .count = 1, + .base = { 0x04500 }, + }, + .pp = { + .count = 1, + .base = { 0x21a00 }, + }, + .intf = { + .base = { 0x00000, 0x21200 }, + .connect = { + [0] = INTF_DISABLED, + [1] = INTF_DSI, + }, + }, + .perf = { + .ab_inefficiency = 100, + .ib_inefficiency = 200, + .clk_inefficiency = 125 + }, + .max_clk = 200000000, +}; + static const struct mdp5_cfg_hw msm8x74v2_config = { .name = "msm8x74", .mdp = { @@ -1236,6 +1317,7 @@ static const struct mdp5_cfg_hw sdm660_config = { static const struct mdp5_cfg_handler cfg_handlers_v1[] = { { .revision = 0, .config = { .hw = &msm8x74v1_config } }, + { .revision = 1, .config = { .hw = &msm8x26_config } }, { .revision = 2, .config = { .hw = &msm8x74v2_config } }, { .revision = 3, .config = { .hw = &apq8084_config } }, { .revision = 6, .config = { .hw = &msm8x16_config } },
Add the required config for the v1.1 MDP5 found on MSM8226. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 82 ++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)