| Message ID | 20230521132336.1279523-2-masahiroy@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] Revert "kheaders: substituting --sort in archive creation" | expand |
On Sun 21 May 2023 22:23:36 GMT, Masahiro Yamada wrote: > tar is used to build the kernel with CONFIG_IKHEADERS. > > GNU tar 1.28 or later is required. > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > --- > > Documentation/process/changes.rst | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst > index a9ef00509c9b..3c0074214d75 100644 > --- a/Documentation/process/changes.rst > +++ b/Documentation/process/changes.rst > @@ -60,6 +60,7 @@ openssl & libcrypto 1.0.0 openssl version > bc 1.06.95 bc --version > Sphinx\ [#f1]_ 1.7 sphinx-build --version > cpio any cpio --version > +GNU tar 1.28 tar --version > gtags (optional) 6.6.5 gtags --version > ====================== =============== ======================================== > > @@ -175,6 +176,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is > enabled. You will also need openssl development packages to build kernels 4.3 > and higher. > > +Tar > +--- > + > +GNU tar is needed if you want to enable access to the kernel headers via sysfs > +(CONFIG_IKHEADERS). CONFIG_IKHEADERS does also require 'xz' (cp. kernel/gen_kheaders.sh), should it be mentioned in changes.rst as well? Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> > + > gtags / GNU GLOBAL (optional) > ----------------------------- > > -- > 2.39.2
On Thu, May 25, 2023 at 5:13 AM Nicolas Schier <nicolas@fjasle.eu> wrote: > > On Sun 21 May 2023 22:23:36 GMT, Masahiro Yamada wrote: > > tar is used to build the kernel with CONFIG_IKHEADERS. > > > > GNU tar 1.28 or later is required. > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > --- > > > > Documentation/process/changes.rst | 7 +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst > > index a9ef00509c9b..3c0074214d75 100644 > > --- a/Documentation/process/changes.rst > > +++ b/Documentation/process/changes.rst > > @@ -60,6 +60,7 @@ openssl & libcrypto 1.0.0 openssl version > > bc 1.06.95 bc --version > > Sphinx\ [#f1]_ 1.7 sphinx-build --version > > cpio any cpio --version > > +GNU tar 1.28 tar --version > > gtags (optional) 6.6.5 gtags --version > > ====================== =============== ======================================== > > > > @@ -175,6 +176,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is > > enabled. You will also need openssl development packages to build kernels 4.3 > > and higher. > > > > +Tar > > +--- > > + > > +GNU tar is needed if you want to enable access to the kernel headers via sysfs > > +(CONFIG_IKHEADERS). > > CONFIG_IKHEADERS does also require 'xz' (cp. kernel/gen_kheaders.sh), > should it be mentioned in changes.rst as well? It is true, bue 'xz' is required in other situations too. For example, CONFIG_KERNEL_XZ CONFIG_MODULE_COMPRESS_XZ CONFIG_INITRAMFS_COMPRESSION_XZ If we document the requirement for 'xz', we need to document the requirement for 'gzip', 'zstd', 'lzma', etc. for the same reason. So, I want to go only with 'tar' in this series. > Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> > > > > + > > gtags / GNU GLOBAL (optional) > > ----------------------------- > > > > -- > > 2.39.2 > > -- > Nicolas Schier > > epost|xmpp: nicolas@fjasle.eu irc://oftc.net/nsc > ↳ gpg: 18ed 52db e34f 860e e9fb c82b 7d97 0932 55a0 ce7f > -- frykten for herren er opphav til kunnskap --
On Sun 28 May 2023 16:15:02 GMT, Masahiro Yamada wrote: > On Thu, May 25, 2023 at 5:13 AM Nicolas Schier <nicolas@fjasle.eu> > wrote: > > > > On Sun 21 May 2023 22:23:36 GMT, Masahiro Yamada wrote: > > > tar is used to build the kernel with CONFIG_IKHEADERS. > > > > > > GNU tar 1.28 or later is required. > > > > > > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> > > > --- > > > > > > Documentation/process/changes.rst | 7 +++++++ > > > 1 file changed, 7 insertions(+) > > > > > > diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst > > > index a9ef00509c9b..3c0074214d75 100644 > > > --- a/Documentation/process/changes.rst > > > +++ b/Documentation/process/changes.rst > > > @@ -60,6 +60,7 @@ openssl & libcrypto 1.0.0 openssl version > > > bc 1.06.95 bc --version > > > Sphinx\ [#f1]_ 1.7 sphinx-build --version > > > cpio any cpio --version > > > +GNU tar 1.28 tar --version > > > gtags (optional) 6.6.5 gtags --version > > > ====================== =============== ======================================== > > > > > > @@ -175,6 +176,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is > > > enabled. You will also need openssl development packages to build kernels 4.3 > > > and higher. > > > > > > +Tar > > > +--- > > > + > > > +GNU tar is needed if you want to enable access to the kernel headers via sysfs > > > +(CONFIG_IKHEADERS). > > > > CONFIG_IKHEADERS does also require 'xz' (cp. kernel/gen_kheaders.sh), > > should it be mentioned in changes.rst as well? > > > It is true, bue 'xz' is required in other situations too. > > For example, > CONFIG_KERNEL_XZ > CONFIG_MODULE_COMPRESS_XZ > CONFIG_INITRAMFS_COMPRESSION_XZ > > > If we document the requirement for 'xz', > we need to document the requirement for > 'gzip', 'zstd', 'lzma', etc. for the same reason. > > So, I want to go only with 'tar' in this series. yes, sounds reasonable. Kind regards, Nicolas
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index a9ef00509c9b..3c0074214d75 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -60,6 +60,7 @@ openssl & libcrypto 1.0.0 openssl version bc 1.06.95 bc --version Sphinx\ [#f1]_ 1.7 sphinx-build --version cpio any cpio --version +GNU tar 1.28 tar --version gtags (optional) 6.6.5 gtags --version ====================== =============== ======================================== @@ -175,6 +176,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is enabled. You will also need openssl development packages to build kernels 4.3 and higher. +Tar +--- + +GNU tar is needed if you want to enable access to the kernel headers via sysfs +(CONFIG_IKHEADERS). + gtags / GNU GLOBAL (optional) -----------------------------
tar is used to build the kernel with CONFIG_IKHEADERS. GNU tar 1.28 or later is required. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- Documentation/process/changes.rst | 7 +++++++ 1 file changed, 7 insertions(+)