diff mbox series

[v3,2/3] arm64: dts: qcom: sc8280xp: Add GPU related nodes

Message ID 20230531030945.4109453-3-quic_bjorande@quicinc.com (mailing list archive)
State New, archived
Headers show
Series drm/msm/adreno: GPU support on SC8280XP | expand

Commit Message

Bjorn Andersson May 31, 2023, 3:09 a.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add Adreno SMMU, GPU clock controller, GMU and GPU nodes for the
SC8280XP.

Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- Added missing opp level (both gpu and gmu)
- Corrected opp-level for highest gpu opp
- Added dma-coherent to gpu smmu

Note that in order for the GPU driver to probe, the last change
requires:
https://lore.kernel.org/linux-arm-msm/20230410185226.3240336-1-dmitry.baryshkov@linaro.org/

Changes since v1:
- Dropped gmu_pdc_seq region from &gmu, as it shouldn't have been used.
- Added missing compatible to &adreno_smmu.
- Dropped aoss_qmp clock in &gmu and &adreno_smmu.
 
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 181 +++++++++++++++++++++++++
 1 file changed, 181 insertions(+)

Comments

Johan Hovold May 31, 2023, 7:28 a.m. UTC | #1
On Tue, May 30, 2023 at 08:09:44PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add Adreno SMMU, GPU clock controller, GMU and GPU nodes for the
> SC8280XP.
> 
> Tested-by: Steev Klimaszewski <steev@kali.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v2:
> - Added missing opp level (both gpu and gmu)
> - Corrected opp-level for highest gpu opp
> - Added dma-coherent to gpu smmu
> 
> Note that in order for the GPU driver to probe, the last change
> requires:
> https://lore.kernel.org/linux-arm-msm/20230410185226.3240336-1-dmitry.baryshkov@linaro.org/

That's a pretty well-hidden notice about a critical dependency. I just
spent the morning debugging why this series broke the probe of the GPU
and only saw this when I was going to report my findings.

Please consider putting information like this in the cover letter in the
future.

> Changes since v1:
> - Dropped gmu_pdc_seq region from &gmu, as it shouldn't have been used.
> - Added missing compatible to &adreno_smmu.
> - Dropped aoss_qmp clock in &gmu and &adreno_smmu.

Changelogs are also preferably placed in the cover letter so that you
don't have to read through N patches to determine what changed from one
revision of a series to the next.

Johan
Bjorn Andersson May 31, 2023, 5:11 p.m. UTC | #2
On Wed, May 31, 2023 at 09:28:35AM +0200, Johan Hovold wrote:
> On Tue, May 30, 2023 at 08:09:44PM -0700, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Add Adreno SMMU, GPU clock controller, GMU and GPU nodes for the
> > SC8280XP.
> > 
> > Tested-by: Steev Klimaszewski <steev@kali.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> > 
> > Changes since v2:
> > - Added missing opp level (both gpu and gmu)
> > - Corrected opp-level for highest gpu opp
> > - Added dma-coherent to gpu smmu
> > 
> > Note that in order for the GPU driver to probe, the last change
> > requires:
> > https://lore.kernel.org/linux-arm-msm/20230410185226.3240336-1-dmitry.baryshkov@linaro.org/
> 
> That's a pretty well-hidden notice about a critical dependency. I just
> spent the morning debugging why this series broke the probe of the GPU
> and only saw this when I was going to report my findings.
> 
> Please consider putting information like this in the cover letter in the
> future.
> 
> > Changes since v1:
> > - Dropped gmu_pdc_seq region from &gmu, as it shouldn't have been used.
> > - Added missing compatible to &adreno_smmu.
> > - Dropped aoss_qmp clock in &gmu and &adreno_smmu.
> 
> Changelogs are also preferably placed in the cover letter so that you
> don't have to read through N patches to determine what changed from one
> revision of a series to the next.
> 

I've always put the changelog in the patches. But I can see the value of
using the cover-letter for that purpose. I will consider doing so...

Regards,
Bjorn
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 6730349e34f4..00f4df7fdcad 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -6,6 +6,7 @@ 
 
 #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -2340,6 +2341,186 @@  tcsr: syscon@1fc0000 {
 			reg = <0x0 0x01fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>, <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
 		usb_0_hsphy: phy@88e5000 {
 			compatible = "qcom,sc8280xp-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";