diff mbox series

[1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks

Message ID 5f15212060f82fb94239174c4e4b46c151645fe8.1685549360.git.daniel@makrotopia.org (mailing list archive)
State Superseded
Headers show
Series [1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks | expand

Commit Message

Daniel Golle May 31, 2023, 4:10 p.m. UTC
Add pck and mck clocks which are needed to access I2C registers on MT7981.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 2 ++
 1 file changed, 2 insertions(+)

Comments

Krzysztof Kozlowski June 1, 2023, 4:54 p.m. UTC | #1
On 31/05/2023 18:10, Daniel Golle wrote:
> Add pck and mck clocks which are needed to access I2C registers on MT7981.
> 
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> index fda0467cdd954..550795f6573c5 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> @@ -78,6 +78,8 @@ properties:
>        - const: dma
>        - const: arb
>        - const: pmic
> +      - const: mck
> +      - const: pck
>  

Adding names does not magically add the clocks. This wasn't tested.

Best regards,
Krzysztof
Daniel Golle June 1, 2023, 7:10 p.m. UTC | #2
On Thu, Jun 01, 2023 at 06:54:01PM +0200, Krzysztof Kozlowski wrote:
> On 31/05/2023 18:10, Daniel Golle wrote:
> > Add pck and mck clocks which are needed to access I2C registers on MT7981.
> > 
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> > ---
> >  Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> > index fda0467cdd954..550795f6573c5 100644
> > --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> > @@ -78,6 +78,8 @@ properties:
> >        - const: dma
> >        - const: arb
> >        - const: pmic
> > +      - const: mck
> > +      - const: pck
> >  
> 
> Adding names does not magically add the clocks. This wasn't tested.

Adding the clocks is done in patch 2/2 which just wasn't sent to
devicetree@ and dt maintainers, but to the relevant mailing lists
instead. Was that wrong and should I always send the complete series
also to devicetree@ as well as dt maintainers?

Anyway. It turns out that arb and pmic clocks are intended for that,
so we can cancel this and I'll just use those instead.
Conor Dooley June 1, 2023, 8:16 p.m. UTC | #3
On Thu, Jun 01, 2023 at 08:10:11PM +0100, Daniel Golle wrote:

> Adding the clocks is done in patch 2/2 which just wasn't sent to
> devicetree@ and dt maintainers, but to the relevant mailing lists
> instead. Was that wrong and should I always send the complete series
> also to devicetree@ as well as dt maintainers?

Everyone is different, but getting both patches of a 2 patch series
really should not annoy anyone and avoiding reviewers having to go
hunting on lore etc is always a positive :)
Krzysztof Kozlowski June 2, 2023, 7:12 a.m. UTC | #4
On 01/06/2023 21:10, Daniel Golle wrote:
> On Thu, Jun 01, 2023 at 06:54:01PM +0200, Krzysztof Kozlowski wrote:
>> On 31/05/2023 18:10, Daniel Golle wrote:
>>> Add pck and mck clocks which are needed to access I2C registers on MT7981.
>>>
>>> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
>>> ---
>>>  Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 2 ++
>>>  1 file changed, 2 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
>>> index fda0467cdd954..550795f6573c5 100644
>>> --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
>>> +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
>>> @@ -78,6 +78,8 @@ properties:
>>>        - const: dma
>>>        - const: arb
>>>        - const: pmic
>>> +      - const: mck
>>> +      - const: pck
>>>  
>>
>> Adding names does not magically add the clocks. This wasn't tested.
> 
> Adding the clocks is done in patch 2/2 which just wasn't sent to
> devicetree@ and dt maintainers, but to the relevant mailing lists
> instead. Was that wrong and should I always send the complete series
> also to devicetree@ as well as dt maintainers?

I didn't mean implementation. I meant that you still do not allow more
clocks! You can put into names whatever you wish but clocks are taken
from "clocks" property, not from clock-names.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
index fda0467cdd954..550795f6573c5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -78,6 +78,8 @@  properties:
       - const: dma
       - const: arb
       - const: pmic
+      - const: mck
+      - const: pck
 
   clock-div:
     $ref: /schemas/types.yaml#/definitions/uint32