| Message ID | 20230601065222.2594700-1-alain.volmat@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 | expand |
Hi Alain On 6/1/23 08:52, Alain Volmat wrote: > Correct the following warnings by adding the required supplies (AVDD, DVDD) > for the ov5640 node. > > arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'AVDD-supply' is a required property > From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml > arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'DVDD-supply' is a required property > From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > --- > arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts > index ba8e9d9a42fa..f27d6dcb6651 100644 > --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts > +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts > @@ -185,7 +185,9 @@ ov5640: camera@3c { > reg = <0x3c>; > clocks = <&clk_ext_camera>; > clock-names = "xclk"; > + AVDD-supply = <&v2v8>; > DOVDD-supply = <&v2v8>; > + DVDD-supply = <&v2v8>; > powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; > reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; > rotation = <180>; Applied on stm32-next. Thanks. Alex
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index ba8e9d9a42fa..f27d6dcb6651 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -185,7 +185,9 @@ ov5640: camera@3c { reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; + AVDD-supply = <&v2v8>; DOVDD-supply = <&v2v8>; + DVDD-supply = <&v2v8>; powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>;
Correct the following warnings by adding the required supplies (AVDD, DVDD) for the ov5640 node. arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'AVDD-supply' is a required property From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'DVDD-supply' is a required property From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++ 1 file changed, 2 insertions(+)