| Message ID | 20230601152636.858553-11-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ti: Fix up references to phandles | expand |
On 01.06.23 17:26, Nishanth Menon wrote: > When referring to array of phandles, using <> to separate the array > entries is better notation as it makes potential errors with phandle and > cell arguments easier to catch. Fix the outliers to be consistent with > the rest of the usage. > > Cc: Jan Kiszka <jan.kiszka@siemens.com> > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 17 ++++++++--------- > .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 18 ++++++++---------- > 2 files changed, 16 insertions(+), 19 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > index 6b052a0ecfa1..bbbb5c169ccc 100644 > --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi > @@ -384,13 +384,12 @@ &main_gpio0 { > > &wkup_gpio0 { > pinctrl-names = "default"; > - pinctrl-0 = < > - &arduino_io_d2_to_d3_pins_default > - &arduino_i2c_aio_switch_pins_default > - &arduino_io_oe_pins_default > - &push_button_pins_default > - &db9_com_mode_pins_default > - >; > + pinctrl-0 = > + <&arduino_io_d2_to_d3_pins_default>, > + <&arduino_i2c_aio_switch_pins_default>, > + <&arduino_io_oe_pins_default>, > + <&push_button_pins_default>, > + <&db9_com_mode_pins_default>; > gpio-line-names = > /* 0..9 */ > "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", > @@ -711,11 +710,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { > &mcu_r5fss0_core0 { > memory-region = <&mcu_r5fss0_core0_dma_memory_region>, > <&mcu_r5fss0_core0_memory_region>; > - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; > + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; > }; > > &mcu_r5fss0_core1 { > memory-region = <&mcu_r5fss0_core1_dma_memory_region>, > <&mcu_r5fss0_core1_memory_region>; > - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; > + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts > index d5e41bdc89c3..1fc93e0b3c9b 100644 > --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts > +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts > @@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ > > &main_gpio0 { > pinctrl-names = "default"; > - pinctrl-0 = < > - &main_m2_pcie_mux_control > - &arduino_io_d4_to_d9_pins_default > - >; > + pinctrl-0 = > + <&main_m2_pcie_mux_control>, > + <&arduino_io_d4_to_d9_pins_default>; > }; > > &main_gpio1 { > pinctrl-names = "default"; > - pinctrl-0 = < > - &main_m2_enable_pins_default > - &main_pmx0_m2_config_pins_default > - &main_pmx1_m2_config_pins_default > - &cp2102n_reset_pin_default > - >; > + pinctrl-0 = > + <&main_m2_enable_pins_default>, > + <&main_pmx0_m2_config_pins_default>, > + <&main_pmx1_m2_config_pins_default>, > + <&cp2102n_reset_pin_default>; > }; > > /* Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Jan
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 6b052a0ecfa1..bbbb5c169ccc 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -384,13 +384,12 @@ &main_gpio0 { &wkup_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &arduino_io_d2_to_d3_pins_default - &arduino_i2c_aio_switch_pins_default - &arduino_io_oe_pins_default - &push_button_pins_default - &db9_com_mode_pins_default - >; + pinctrl-0 = + <&arduino_io_d2_to_d3_pins_default>, + <&arduino_i2c_aio_switch_pins_default>, + <&arduino_io_oe_pins_default>, + <&push_button_pins_default>, + <&db9_com_mode_pins_default>; gpio-line-names = /* 0..9 */ "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", @@ -711,11 +710,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index d5e41bdc89c3..1fc93e0b3c9b 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_pcie_mux_control - &arduino_io_d4_to_d9_pins_default - >; + pinctrl-0 = + <&main_m2_pcie_mux_control>, + <&arduino_io_d4_to_d9_pins_default>; }; &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = < - &main_m2_enable_pins_default - &main_pmx0_m2_config_pins_default - &main_pmx1_m2_config_pins_default - &cp2102n_reset_pin_default - >; + pinctrl-0 = + <&main_m2_enable_pins_default>, + <&main_pmx0_m2_config_pins_default>, + <&main_pmx1_m2_config_pins_default>, + <&cp2102n_reset_pin_default>; }; /*
When referring to array of phandles, using <> to separate the array entries is better notation as it makes potential errors with phandle and cell arguments easier to catch. Fix the outliers to be consistent with the rest of the usage. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Nishanth Menon <nm@ti.com> --- .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 17 ++++++++--------- .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 18 ++++++++---------- 2 files changed, 16 insertions(+), 19 deletions(-)