mbox series

[v14,00/10] add DSC 1.2 dpu supports

Message ID 1685036458-22683-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive)
Headers show
Series add DSC 1.2 dpu supports | expand

Message

Kuogee Hsieh May 25, 2023, 5:40 p.m. UTC 
This series adds the DPU side changes to support DSC 1.2 encoder. This
was validated with both DSI DSC 1.2 panel and DP DSC 1.2 monitor.
The DSI and DP parts will be pushed later on top of this change.
This seriel is rebase on [1], [2] and catalog fixes from rev-4 of [3].

[1]: https://patchwork.freedesktop.org/series/116851/
[2]: https://patchwork.freedesktop.org/series/116615/
[3]: https://patchwork.freedesktop.org/series/112332/

Abhinav Kumar (2):
  drm/msm/dpu: add DSC blocks to the catalog of MSM8998 and SC8180X
  drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets

Kuogee Hsieh (8):
  drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register
  drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
  drm/msm/dpu: Guard PINGPONG DSC ops behind DPU_PINGPONG_DSC bit
  drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
  drm/msm/dpu: add support for DSC encoder v1.2 engine
  drm/msm/dpu: always clear every individual pending flush mask
  drm/msm/dpu: separate DSC flush update out of interface
  drm/msm/dpu: Tear down DSC datapath on encoder cleanup

 drivers/gpu/drm/msm/Makefile                       |   1 +
 .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h    |   7 +
 .../drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h    |  11 +
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h |  14 +
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h |   7 +
 .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h   |  16 +
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h |  14 +
 .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h |  14 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |  51 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |  24 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  35 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c         |  33 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h         |  11 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c         |  14 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h         |  15 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c     | 387 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c    |   9 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c             |   7 +-
 19 files changed, 644 insertions(+), 29 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c

Comments

Dmitry Baryshkov June 4, 2023, 3:01 a.m. UTC | #1 
On Thu, 25 May 2023 10:40:48 -0700, Kuogee Hsieh wrote:
> This series adds the DPU side changes to support DSC 1.2 encoder. This
> was validated with both DSI DSC 1.2 panel and DP DSC 1.2 monitor.
> The DSI and DP parts will be pushed later on top of this change.
> This seriel is rebase on [1], [2] and catalog fixes from rev-4 of [3].
> 
> [1]: https://patchwork.freedesktop.org/series/116851/
> [2]: https://patchwork.freedesktop.org/series/116615/
> [3]: https://patchwork.freedesktop.org/series/112332/
> 
> [...]

Applied, thanks!

[01/10] drm/msm/dpu: set DSC flush bit correctly at MDP CTL flush register
        https://gitlab.freedesktop.org/lumag/msm/-/commit/12cef323c903
[03/10] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
        https://gitlab.freedesktop.org/lumag/msm/-/commit/c20c44403e11
[04/10] drm/msm/dpu: Guard PINGPONG DSC ops behind DPU_PINGPONG_DSC bit
        https://gitlab.freedesktop.org/lumag/msm/-/commit/108ff1417795
[05/10] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
        https://gitlab.freedesktop.org/lumag/msm/-/commit/d45be1ccd330
[07/10] drm/msm/dpu: always clear every individual pending flush mask
        https://gitlab.freedesktop.org/lumag/msm/-/commit/625cbb077007
[08/10] drm/msm/dpu: separate DSC flush update out of interface
        https://gitlab.freedesktop.org/lumag/msm/-/commit/761c629d1860
[10/10] drm/msm/dpu: Tear down DSC datapath on encoder cleanup
        https://gitlab.freedesktop.org/lumag/msm/-/commit/997ed53dd693

(Omitted patches 02/10, 06/10, 09/10)

Best regards,
Dmitry Baryshkov June 15, 2023, 11:31 a.m. UTC | #2 
On Thu, 25 May 2023 10:40:48 -0700, Kuogee Hsieh wrote:
> This series adds the DPU side changes to support DSC 1.2 encoder. This
> was validated with both DSI DSC 1.2 panel and DP DSC 1.2 monitor.
> The DSI and DP parts will be pushed later on top of this change.
> This seriel is rebase on [1], [2] and catalog fixes from rev-4 of [3].
> 
> [1]: https://patchwork.freedesktop.org/series/116851/
> [2]: https://patchwork.freedesktop.org/series/116615/
> [3]: https://patchwork.freedesktop.org/series/112332/
> 
> [...]

Applied, thanks!

[06/10] drm/msm/dpu: add support for DSC encoder v1.2 engine
        https://gitlab.freedesktop.org/lumag/msm/-/commit/8c4094b275f6
[09/10] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
        https://gitlab.freedesktop.org/lumag/msm/-/commit/0d1b10c63346

Best regards,