@@ -179,6 +179,14 @@ netdev_tx_t mana_start_xmit(struct sk_buff *skb, struct net_device *ndev)
pkg.tx_oob.s_oob.short_vp_offset = txq->vp_offset;
}
+ if (skb_vlan_tag_present(skb)) {
+ pkt_fmt = MANA_LONG_PKT_FMT;
+ pkg.tx_oob.l_oob.inject_vlan_pri_tag = 1;
+ pkg.tx_oob.l_oob.pcp = skb_vlan_tag_get_prio(skb);
+ pkg.tx_oob.l_oob.dei = skb_vlan_tag_get_cfi(skb);
+ pkg.tx_oob.l_oob.vlan_id = skb_vlan_tag_get_id(skb);
+ }
+
pkg.tx_oob.s_oob.pkt_fmt = pkt_fmt;
if (pkt_fmt == MANA_SHORT_PKT_FMT) {
@@ -1457,6 +1465,12 @@ static void mana_rx_skb(void *buf_va, struct mana_rxcomp_oob *cqe,
skb_set_hash(skb, hash_value, PKT_HASH_TYPE_L3);
}
+ if (cqe->rx_vlantag_present) {
+ u16 vlan_tci = cqe->rx_vlan_id;
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci);
+ }
+
u64_stats_update_begin(&rx_stats->syncp);
rx_stats->packets++;
rx_stats->bytes += pkt_len;
@@ -2451,8 +2465,9 @@ static int mana_probe_port(struct mana_context *ac, int port_idx,
ndev->hw_features |= NETIF_F_RXCSUM;
ndev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
ndev->hw_features |= NETIF_F_RXHASH;
- ndev->features = ndev->hw_features;
- ndev->vlan_features = 0;
+ ndev->features = ndev->hw_features | NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
+ ndev->vlan_features = ndev->features;
ndev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_NDO_XMIT;
To support vlan, use MANA_LONG_PKT_FMT if vlan tag is present in TX skb. Then extract the vlan tag from the skb struct, and save it to tx_oob for the NIC to transmit. For vlan tags on the payload, they are accepted by the NIC too. For RX, extract the vlan tag from CQE and put it into skb. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> --- V2: Removed the code that extracts inband tag, because our NIC accepts inband tags too. --- drivers/net/ethernet/microsoft/mana/mana_en.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)