| Message ID | c33c928b7c6c9bb4e7abe84eb8df9f440add275b.1686486464.git.chunkeey@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 7f6ee56ca0df0484338d12cd142fb5ebde8875a9 |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | [v2] dt-bindings: net: wireless: ath10k: add ieee80211-freq-limit property | expand |
On 11/06/2023 14:37, Christian Lamparter wrote: > This is an existing optional property that ieee80211.yaml/cfg80211 > provides. It's useful to further restrict supported frequencies > for a specified device through device-tree. > > For testing the addition, I added the ieee80211-freq-limit > property with values from an OpenMesh A62 device. This is > because the OpenMesh A62 has "special filters in front of > the RX+TX paths to the 5GHz PHYs. These filtered channel > can in theory still be used by the hardware but the signal > strength is reduced so much that it makes no sense." > > The driver supported this since ~2018 by > commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit") > > Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c > Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
Christian Lamparter <chunkeey@gmail.com> wrote: > This is an existing optional property that ieee80211.yaml/cfg80211 > provides. It's useful to further restrict supported frequencies > for a specified device through device-tree. > > For testing the addition, I added the ieee80211-freq-limit > property with values from an OpenMesh A62 device. This is > because the OpenMesh A62 has "special filters in front of > the RX+TX paths to the 5GHz PHYs. These filtered channel > can in theory still be used by the hardware but the signal > strength is reduced so much that it makes no sense." > > The driver supported this since ~2018 by > commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit") > > Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c > Signed-off-by: Christian Lamparter <chunkeey@gmail.com> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. 7f6ee56ca0df dt-bindings: net: wireless: ath10k: add ieee80211-freq-limit property
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; };
This is an existing optional property that ieee80211.yaml/cfg80211 provides. It's useful to further restrict supported frequencies for a specified device through device-tree. For testing the addition, I added the ieee80211-freq-limit property with values from an OpenMesh A62 device. This is because the OpenMesh A62 has "special filters in front of the RX+TX paths to the 5GHz PHYs. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense." The driver supported this since ~2018 by commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit") Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- v1->v2: - AllOf is a list. So add it to the existing one? - added example with link to vendor hardware reason notes about the filtering --- .../devicetree/bindings/net/wireless/qcom,ath10k.yaml | 4 ++++ 1 file changed, 4 insertions(+)