| Message ID | 1686694742-20862-3-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | retrieve DSI DSC through priv-dsi[0] | expand |
On 6/13/2023 3:19 PM, Kuogee Hsieh wrote: > ince struct drm_dsc_config is stored at atomic_enable() instead S got cut off in since > of display setup time during boot up, saving struct drm_dsc_config > at struct msm_display_info is not necessary. Lets drop the dsc member > from struct msm_display_info. > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 -- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 2 -- > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 -- > 3 files changed, 6 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index e00cd39..50ce2ef 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -2309,8 +2309,6 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > dpu_enc->idle_pc_supported = > dpu_kms->catalog->caps->has_idle_pc; > > - dpu_enc->dsc = disp_info->dsc; > - > mutex_lock(&dpu_enc->enc_lock); > for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { > /* > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > index 90e1925..4c05fd5 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h > @@ -28,7 +28,6 @@ > * @is_cmd_mode Boolean to indicate if the CMD mode is requested > * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is > * used instead of panel TE in cmd mode panels > - * @dsc: DSC configuration data for DSC-enabled displays > */ > struct msm_display_info { > enum dpu_intf_type intf_type; > @@ -36,7 +35,6 @@ struct msm_display_info { > uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; > bool is_cmd_mode; > bool is_te_using_watchdog_timer; > - struct drm_dsc_config *dsc; > }; > > /** > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > index 613384b..5e77e09 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c > @@ -544,8 +544,6 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev, > > info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]); > > - info.dsc = msm_dsi_get_dsc_config(priv->dsi[i]); > - > encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI, &info); > if (IS_ERR(encoder)) { > DPU_ERROR("encoder init failed for dsi display\n");
On 14/06/2023 01:19, Kuogee Hsieh wrote: > ince struct drm_dsc_config is stored at atomic_enable() instead > of display setup time during boot up, saving struct drm_dsc_config > at struct msm_display_info is not necessary. Lets drop the dsc member > from struct msm_display_info. With the 'S' in 'Since' brought back in place: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 -- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 2 -- > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 -- > 3 files changed, 6 deletions(-) >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index e00cd39..50ce2ef 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2309,8 +2309,6 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, dpu_enc->idle_pc_supported = dpu_kms->catalog->caps->has_idle_pc; - dpu_enc->dsc = disp_info->dsc; - mutex_lock(&dpu_enc->enc_lock); for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { /* diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h index 90e1925..4c05fd5 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h @@ -28,7 +28,6 @@ * @is_cmd_mode Boolean to indicate if the CMD mode is requested * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is * used instead of panel TE in cmd mode panels - * @dsc: DSC configuration data for DSC-enabled displays */ struct msm_display_info { enum dpu_intf_type intf_type; @@ -36,7 +35,6 @@ struct msm_display_info { uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY]; bool is_cmd_mode; bool is_te_using_watchdog_timer; - struct drm_dsc_config *dsc; }; /** diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index 613384b..5e77e09 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -544,8 +544,6 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev, info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]); - info.dsc = msm_dsi_get_dsc_config(priv->dsi[i]); - encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI, &info); if (IS_ERR(encoder)) { DPU_ERROR("encoder init failed for dsi display\n");
ince struct drm_dsc_config is stored at atomic_enable() instead of display setup time during boot up, saving struct drm_dsc_config at struct msm_display_info is not necessary. Lets drop the dsc member from struct msm_display_info. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 -- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 2 -- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 -- 3 files changed, 6 deletions(-)