| Message ID | 20230612042559.375660-6-michael.roth@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add AMD Secure Nested Paging (SEV-SNP) Hypervisor Support | expand |
On Sun, Jun 11, 2023 at 11:25:13PM -0500, Michael Roth wrote: > Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in > arch/x86/coco, but that is generally only applicable for guest support. > > For SEV-SNP, helpers related purely to host support will also live in > arch/x86/coco. To allow for CoCo-related host support code in > arch/x86/coco, move that check down into the Makefile and check for it > specifically when needed. Hm. TDX host support uses arch/x86/virt/vmx/tdx/. I think we need to be consistent here. IIRC, Borislav proposed the scheme that TDX uses.
On Sun, Jun 11, 2023 at 11:25:13PM -0500, Michael Roth wrote: > Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in ^^^^^^ Use proper english words pls. > arch/x86/coco, but that is generally only applicable for guest support. > > For SEV-SNP, helpers related purely to host support will also live in > arch/x86/coco. To allow for CoCo-related host support code in > arch/x86/coco, move that check down into the Makefile and check for it > specifically when needed. I have no clue what that means. Example? The last time we talked about paths, we ended up agreeing on: https://lore.kernel.org/all/Yg5nh1RknPRwIrb8@zn.tnic/ So your "helpers related purely to host support" should go to arch/x86/virt/svm/sev*.c And just to keep it simple, that should be arch/x86/virt/svm/sev.c and if there's real need to split that, we can do that later. Thx.
On Tue, Jun 20, 2023 at 02:09:20PM +0200, Borislav Petkov wrote: > On Sun, Jun 11, 2023 at 11:25:13PM -0500, Michael Roth wrote: > > Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in > ^^^^^^ > > Use proper english words pls. > > > arch/x86/coco, but that is generally only applicable for guest support. > > > > For SEV-SNP, helpers related purely to host support will also live in > > arch/x86/coco. To allow for CoCo-related host support code in > > arch/x86/coco, move that check down into the Makefile and check for it > > specifically when needed. > > I have no clue what that means. Example? Basically, arch/x86/coco/Makefile is never processed if arch/x86/Kbuild indicates that CONFIG_HAS_CC_PLATFORM is not set. So if we want to have stuff in arch/x86/coco/Makefile that build for !CONFIG_HAS_CC_PLATFORM, like SNP host support, which does not rely on CONFIG_HAS_CC_PLATFORM being set, that check needs to be moved down into arch/x86/coco/Makefile. > > The last time we talked about paths, we ended up agreeing on: > > https://lore.kernel.org/all/Yg5nh1RknPRwIrb8@zn.tnic/ > > So your "helpers related purely to host support" should go to > > arch/x86/virt/svm/sev*.c > > And just to keep it simple, that should be > > arch/x86/virt/svm/sev.c > > and if there's real need to split that, we can do that later. Ok, makes sense. Thanks, Mike > > Thx. > > -- > Regards/Gruss, > Boris. > > https://people.kernel.org/tglx/notes-about-netiquette
On Tue, Jun 20, 2023 at 03:43:15PM -0500, Michael Roth wrote: > Basically, arch/x86/coco/Makefile is never processed if arch/x86/Kbuild > indicates that CONFIG_HAS_CC_PLATFORM is not set. So if we want to have > stuff in arch/x86/coco/Makefile that build for !CONFIG_HAS_CC_PLATFORM, > like SNP host support, which does not rely on CONFIG_HAS_CC_PLATFORM > being set, that check needs to be moved down into arch/x86/coco/Makefile. Ok, so if you put SNP host support into arch/x86/virt/svm/sev.c, that should work too and won't have any relation to CONFIG_HAS_CC_PLATFORM, right? The CC_PLATFORM thing is a way to check for confidential computing guest features by abstracting the capabilities so that you don't have to check *each* and *every* conf guest type in the conditionals and thus go nuts. Thx.
On Wed, Jun 21, 2023 at 10:54:00AM +0200, Borislav Petkov wrote: > On Tue, Jun 20, 2023 at 03:43:15PM -0500, Michael Roth wrote: > > Basically, arch/x86/coco/Makefile is never processed if arch/x86/Kbuild > > indicates that CONFIG_HAS_CC_PLATFORM is not set. So if we want to have > > stuff in arch/x86/coco/Makefile that build for !CONFIG_HAS_CC_PLATFORM, > > like SNP host support, which does not rely on CONFIG_HAS_CC_PLATFORM > > being set, that check needs to be moved down into arch/x86/coco/Makefile. > > Ok, so if you put SNP host support into arch/x86/virt/svm/sev.c, that > should work too and won't have any relation to CONFIG_HAS_CC_PLATFORM, > right? Right, that works out just as well, and ends up being a bit more straightforward. I have it implemented here: https://github.com/mdroth/linux/commits/snp-host-latest-v9b https://github.com/mdroth/linux/commit/a889a2dd64b62d9c3bf74cf02e7d8d71c7061667 and dropped the patch that reworks arch/x86/coco/Makefile. Thanks, Mike > > The CC_PLATFORM thing is a way to check for confidential computing guest > features by abstracting the capabilities so that you don't have to check > *each* and *every* conf guest type in the conditionals and thus go nuts. > > Thx. > > -- > Regards/Gruss, > Boris. > > https://people.kernel.org/tglx/notes-about-netiquette
Hi, On 6/11/23 9:25 PM, Michael Roth wrote: > Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in > arch/x86/coco, but that is generally only applicable for guest support.> > For SEV-SNP, helpers related purely to host support will also live in > arch/x86/coco. To allow for CoCo-related host support code in > arch/x86/coco, move that check down into the Makefile and check for it > specifically when needed. I think CONFIG_HAS_CC_PLATFORM is not meant to be guest specific (otherwise, we could have named it CONFIG_HAS_CC_GUEST). Will it create any issue if we enable it in host? > > Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> > Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> > Signed-off-by: Michael Roth <michael.roth@amd.com> > --- > arch/x86/Kbuild | 2 +- > arch/x86/coco/Makefile | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild > index 5a83da703e87..1889cef48b58 100644 > --- a/arch/x86/Kbuild > +++ b/arch/x86/Kbuild > @@ -1,5 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0 > -obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += coco/ > +obj-y += coco/ > > obj-y += entry/ > > diff --git a/arch/x86/coco/Makefile b/arch/x86/coco/Makefile > index c816acf78b6a..6aa52e719bf5 100644 > --- a/arch/x86/coco/Makefile > +++ b/arch/x86/coco/Makefile > @@ -3,6 +3,6 @@ CFLAGS_REMOVE_core.o = -pg > KASAN_SANITIZE_core.o := n > CFLAGS_core.o += -fno-stack-protector > > -obj-y += core.o > +obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += core.o > > obj-$(CONFIG_INTEL_TDX_GUEST) += tdx/
On 7/9/23 22:05, Sathyanarayanan Kuppuswamy wrote: > Hi, > > On 6/11/23 9:25 PM, Michael Roth wrote: >> Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in >> arch/x86/coco, but that is generally only applicable for guest support.> >> For SEV-SNP, helpers related purely to host support will also live in >> arch/x86/coco. To allow for CoCo-related host support code in >> arch/x86/coco, move that check down into the Makefile and check for it >> specifically when needed. > > > I think CONFIG_HAS_CC_PLATFORM is not meant to be guest specific (otherwise, Correct, it is used in bare-metal for SME support, so that needs to continue to work. Thanks, Tom > we could have named it CONFIG_HAS_CC_GUEST). Will it create any issue if > we enable it in host? > >> >> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> >> Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> >> Signed-off-by: Michael Roth <michael.roth@amd.com> >> --- >> arch/x86/Kbuild | 2 +- >> arch/x86/coco/Makefile | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild >> index 5a83da703e87..1889cef48b58 100644 >> --- a/arch/x86/Kbuild >> +++ b/arch/x86/Kbuild >> @@ -1,5 +1,5 @@ >> # SPDX-License-Identifier: GPL-2.0 >> -obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += coco/ >> +obj-y += coco/ >> >> obj-y += entry/ >> >> diff --git a/arch/x86/coco/Makefile b/arch/x86/coco/Makefile >> index c816acf78b6a..6aa52e719bf5 100644 >> --- a/arch/x86/coco/Makefile >> +++ b/arch/x86/coco/Makefile >> @@ -3,6 +3,6 @@ CFLAGS_REMOVE_core.o = -pg >> KASAN_SANITIZE_core.o := n >> CFLAGS_core.o += -fno-stack-protector >> >> -obj-y += core.o >> +obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += core.o >> >> obj-$(CONFIG_INTEL_TDX_GUEST) += tdx/ >
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild index 5a83da703e87..1889cef48b58 100644 --- a/arch/x86/Kbuild +++ b/arch/x86/Kbuild @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += coco/ +obj-y += coco/ obj-y += entry/ diff --git a/arch/x86/coco/Makefile b/arch/x86/coco/Makefile index c816acf78b6a..6aa52e719bf5 100644 --- a/arch/x86/coco/Makefile +++ b/arch/x86/coco/Makefile @@ -3,6 +3,6 @@ CFLAGS_REMOVE_core.o = -pg KASAN_SANITIZE_core.o := n CFLAGS_core.o += -fno-stack-protector -obj-y += core.o +obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += core.o obj-$(CONFIG_INTEL_TDX_GUEST) += tdx/
Currently CONFIG_HAS_CC_PLATFORM is a prereq for building anything in arch/x86/coco, but that is generally only applicable for guest support. For SEV-SNP, helpers related purely to host support will also live in arch/x86/coco. To allow for CoCo-related host support code in arch/x86/coco, move that check down into the Makefile and check for it specifically when needed. Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> --- arch/x86/Kbuild | 2 +- arch/x86/coco/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)