diff mbox series

[v4,1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format

Message ID 20230613083445.1129137-1-xu.yang_2@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v4,1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format | expand

Commit Message

Xu Yang June 13, 2023, 8:34 a.m. UTC 
Convert the binding to DT schema format. Besides, this also add clocks,
'#phy-cells', phy-3p0-supply and power-domains properties which are not
contained in txt file due to txt file lack updates.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - change filename to fsl,mxs-usbphy.yaml
 - add other optional properties
 - narrow fsl,anatop to imx6
 - use additionalProperties
Changes in v3:
 - fix indentation
 - add clocks property to example
Changes in v4:
 - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
 - limit item of reg and interrupts to 1
 - sort enum items
 - modify commit message
---
 .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
 .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
 2 files changed, 125 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

Comments

Krzysztof Kozlowski June 13, 2023, 7:16 p.m. UTC | #1 
On 13/06/2023 10:34, Xu Yang wrote:
> Convert the binding to DT schema format. Besides, this also add clocks,
> '#phy-cells', phy-3p0-supply and power-domains properties which are not
> contained in txt file due to txt file lack updates.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring June 20, 2023, 3:29 p.m. UTC | #2 
On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> Convert the binding to DT schema format. Besides, this also add clocks,
> '#phy-cells', phy-3p0-supply and power-domains properties which are not
> contained in txt file due to txt file lack updates.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v2:
>  - change filename to fsl,mxs-usbphy.yaml
>  - add other optional properties
>  - narrow fsl,anatop to imx6
>  - use additionalProperties
> Changes in v3:
>  - fix indentation
>  - add clocks property to example
> Changes in v4:
>  - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
>  - limit item of reg and interrupts to 1
>  - sort enum items
>  - modify commit message
> ---
>  .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
>  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
>  2 files changed, 125 insertions(+), 33 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt

This should be applied by the PHY maintainers, but they weren't Cc'ed.

> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> new file mode 100644
> index 000000000000..cc9f2bc7e6fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale MXS USB Phy Device
> +
> +maintainers:
> +  - Xu Yang <xu.yang_2@nxp.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,imx23-usbphy
> +          - fsl,imx7ulp-usbphy
> +          - fsl,vf610-usbphy
> +      - items:
> +          - enum:
> +              - fsl,imx28-usbphy
> +              - fsl,imx6ul-usbphy
> +              - fsl,imx6sl-usbphy
> +              - fsl,imx6sx-usbphy
> +              - fsl,imx6q-usbphy
> +          - const: fsl,imx23-usbphy
> +      - items:
> +          - const: fsl,imx6sll-usbphy
> +          - const: fsl,imx6ul-usbphy
> +          - const: fsl,imx23-usbphy
> +      - items:
> +          - const: fsl,imx8dxl-usbphy
> +          - const: fsl,imx7ulp-usbphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  '#phy-cells':
> +    const: 0
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  fsl,anatop:
> +    description:
> +      phandle for anatop register, it is only for imx6 SoC series.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  phy-3p0-supply:
> +    description:
> +      One of USB PHY's power supply. Can be used to keep a good signal
> +      quality.
> +
> +  fsl,tx-cal-45-dn-ohms:
> +    description:
> +      Resistance (in ohms) of switchable high-speed trimming resistor
> +      connected in parallel with the 45 ohm resistor that terminates
> +      the DN output signal.
> +    minimum: 35
> +    maximum: 54
> +    default: 45
> +
> +  fsl,tx-cal-45-dp-ohms:
> +    description:
> +      Resistance (in ohms) of switchable high-speed trimming resistor
> +      connected in parallel with the 45 ohm resistor that terminates
> +      the DP output signal.
> +    minimum: 35
> +    maximum: 54
> +    default: 45
> +
> +  fsl,tx-d-cal:
> +    description:
> +      Current trimming value (as a percentage) of the 17.78 mA TX
> +      reference current.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 79
> +    maximum: 119
> +    default: 100
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          oneOf:
> +            - enum:
> +                - fsl,imx6q-usbphy
> +                - fsl,imx6sl-usbphy
> +                - fsl,imx6sx-usbphy
> +                - fsl,imx6sll-usbphy
> +                - fsl,vf610-usbphy
> +            - items:
> +                - const: fsl,imx6ul-usbphy
> +                - const: fsl,imx23-usbphy
> +    then:
> +      required:
> +        - fsl,anatop
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/imx6qdl-clock.h>
> +
> +    usbphy1: usb-phy@20c9000 {
> +        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> +        reg = <0x020c9000 0x1000>;
> +        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
> +        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +        fsl,anatop = <&anatop>;
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> deleted file mode 100644
> index 70c813b0755f..000000000000
> --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -* Freescale MXS USB Phy Device
> -
> -Required properties:
> -- compatible: should contain:
> -	* "fsl,imx23-usbphy" for imx23 and imx28
> -	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
> -	* "fsl,imx6sl-usbphy" for imx6sl
> -	* "fsl,vf610-usbphy" for Vybrid vf610
> -	* "fsl,imx6sx-usbphy" for imx6sx
> -	* "fsl,imx7ulp-usbphy" for imx7ulp
> -	* "fsl,imx8dxl-usbphy" for imx8dxl
> -  "fsl,imx23-usbphy" is still a fallback for other strings
> -- reg: Should contain registers location and length
> -- interrupts: Should contain phy interrupt
> -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
> -
> -Optional properties:
> -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> -  that terminates the DN output signal. Default: 45
> -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> -  that terminates the DP output signal. Default: 45
> -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
> -  the 17.78mA TX reference current. Default: 100
> -
> -Example:
> -usbphy1: usb-phy@20c9000 {
> -	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> -	reg = <0x020c9000 0x1000>;
> -	interrupts = <0 44 0x04>;
> -	fsl,anatop = <&anatop>;
> -};
> -- 
> 2.34.1
>
Xu Yang June 21, 2023, 2:16 a.m. UTC | #3 
++ Vinod Koul

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Tuesday, June 20, 2023 11:29 PM
> To: Xu Yang <xu.yang_2@nxp.com>
> Cc: krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>; linux-phy@lists.infradead.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-usb@vger.kernel.org; Jun Li <jun.li@nxp.com>
> Subject: [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
>
> Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the
> message using the 'Report this email' button
>
>
> On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> > Convert the binding to DT schema format. Besides, this also add clocks,
> > '#phy-cells', phy-3p0-supply and power-domains properties which are not
> > contained in txt file due to txt file lack updates.
> >
> > Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> >
> > ---
> > Changes in v2:
> >  - change filename to fsl,mxs-usbphy.yaml
> >  - add other optional properties
> >  - narrow fsl,anatop to imx6
> >  - use additionalProperties
> > Changes in v3:
> >  - fix indentation
> >  - add clocks property to example
> > Changes in v4:
> >  - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
> >  - limit item of reg and interrupts to 1
> >  - sort enum items
> >  - modify commit message
> > ---
> >  .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
> >  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
> >  2 files changed, 125 insertions(+), 33 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
>
> This should be applied by the PHY maintainers, but they weren't Cc'ed.

I see. Thanks for reminding.

Hi Vinod,

Could you please help to apply below two patches:
    - [v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
    - [v4,2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
The review process has been completed.
Many thanks in advance.

Thanks,
Xu Yang

>
> >
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > new file mode 100644
> > index 000000000000..cc9f2bc7e6fb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > @@ -0,0 +1,125 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> http://devicetree.org/schemas/phy/fsl,mxs-
> usbphy.yaml%23&data=05%7C01%7Cxu.yang_2%40nxp.com%7Cac9c63d6d88543a24a8308db71a32171%7C686ea1d3bc2b4c
> 6fa92cd99c5c301635%7C0%7C0%7C638228717681736316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjo
> iV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HB6IkZX%2BRcbpGNmFCYWOfPYYffoH5QPreo8
> A6jHjRz0%3D&reserved=0
> > +$schema: http://devicetree.org/meta-
> schemas%2Fcore.yaml%23&data=05%7C01%7Cxu.yang_2%40nxp.com%7Cac9c63d6d88543a24a8308db71a32171%7C686ea1
> d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638228717681736316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMD
> AiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XZ8gZnd%2FCse%2FCFgFKyKganKz7cs
> Vyq6hdIJpRY4p8Fc%3D&reserved=0
> > +
> > +title: Freescale MXS USB Phy Device
> > +
> > +maintainers:
> > +  - Xu Yang <xu.yang_2@nxp.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - fsl,imx23-usbphy
> > +          - fsl,imx7ulp-usbphy
> > +          - fsl,vf610-usbphy
> > +      - items:
> > +          - enum:
> > +              - fsl,imx28-usbphy
> > +              - fsl,imx6ul-usbphy
> > +              - fsl,imx6sl-usbphy
> > +              - fsl,imx6sx-usbphy
> > +              - fsl,imx6q-usbphy
> > +          - const: fsl,imx23-usbphy
> > +      - items:
> > +          - const: fsl,imx6sll-usbphy
> > +          - const: fsl,imx6ul-usbphy
> > +          - const: fsl,imx23-usbphy
> > +      - items:
> > +          - const: fsl,imx8dxl-usbphy
> > +          - const: fsl,imx7ulp-usbphy
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  '#phy-cells':
> > +    const: 0
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  fsl,anatop:
> > +    description:
> > +      phandle for anatop register, it is only for imx6 SoC series.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  phy-3p0-supply:
> > +    description:
> > +      One of USB PHY's power supply. Can be used to keep a good signal
> > +      quality.
> > +
> > +  fsl,tx-cal-45-dn-ohms:
> > +    description:
> > +      Resistance (in ohms) of switchable high-speed trimming resistor
> > +      connected in parallel with the 45 ohm resistor that terminates
> > +      the DN output signal.
> > +    minimum: 35
> > +    maximum: 54
> > +    default: 45
> > +
> > +  fsl,tx-cal-45-dp-ohms:
> > +    description:
> > +      Resistance (in ohms) of switchable high-speed trimming resistor
> > +      connected in parallel with the 45 ohm resistor that terminates
> > +      the DP output signal.
> > +    minimum: 35
> > +    maximum: 54
> > +    default: 45
> > +
> > +  fsl,tx-d-cal:
> > +    description:
> > +      Current trimming value (as a percentage) of the 17.78 mA TX
> > +      reference current.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 79
> > +    maximum: 119
> > +    default: 100
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          oneOf:
> > +            - enum:
> > +                - fsl,imx6q-usbphy
> > +                - fsl,imx6sl-usbphy
> > +                - fsl,imx6sx-usbphy
> > +                - fsl,imx6sll-usbphy
> > +                - fsl,vf610-usbphy
> > +            - items:
> > +                - const: fsl,imx6ul-usbphy
> > +                - const: fsl,imx23-usbphy
> > +    then:
> > +      required:
> > +        - fsl,anatop
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/imx6qdl-clock.h>
> > +
> > +    usbphy1: usb-phy@20c9000 {
> > +        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> > +        reg = <0x020c9000 0x1000>;
> > +        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
> > +        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> > +        fsl,anatop = <&anatop>;
> > +    };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-
> usb-phy.txt
> > deleted file mode 100644
> > index 70c813b0755f..000000000000
> > --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> > +++ /dev/null
> > @@ -1,33 +0,0 @@
> > -* Freescale MXS USB Phy Device
> > -
> > -Required properties:
> > -- compatible: should contain:
> > -     * "fsl,imx23-usbphy" for imx23 and imx28
> > -     * "fsl,imx6q-usbphy" for imx6dq and imx6dl
> > -     * "fsl,imx6sl-usbphy" for imx6sl
> > -     * "fsl,vf610-usbphy" for Vybrid vf610
> > -     * "fsl,imx6sx-usbphy" for imx6sx
> > -     * "fsl,imx7ulp-usbphy" for imx7ulp
> > -     * "fsl,imx8dxl-usbphy" for imx8dxl
> > -  "fsl,imx23-usbphy" is still a fallback for other strings
> > -- reg: Should contain registers location and length
> > -- interrupts: Should contain phy interrupt
> > -- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
> > -
> > -Optional properties:
> > -- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> > -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> > -  that terminates the DN output signal. Default: 45
> > -- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
> > -  high-speed trimming resistor connected in parallel with the 45 ohm resistor
> > -  that terminates the DP output signal. Default: 45
> > -- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
> > -  the 17.78mA TX reference current. Default: 100
> > -
> > -Example:
> > -usbphy1: usb-phy@20c9000 {
> > -     compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
> > -     reg = <0x020c9000 0x1000>;
> > -     interrupts = <0 44 0x04>;
> > -     fsl,anatop = <&anatop>;
> > -};
> > --
> > 2.34.1
> >
Vinod Koul June 21, 2023, 12:01 p.m. UTC | #4 
On 21-06-23, 02:16, Xu Yang wrote:
> ++ Vinod Koul
> 
> > -----Original Message-----
> > From: Rob Herring <robh@kernel.org>
> > Sent: Tuesday, June 20, 2023 11:29 PM
> > To: Xu Yang <xu.yang_2@nxp.com>
> > Cc: krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de;
> > kernel@pengutronix.de; festevam@gmail.com; dl-linux-imx <linux-imx@nxp.com>; linux-phy@lists.infradead.org;
> > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-usb@vger.kernel.org; Jun Li <jun.li@nxp.com>
> > Subject: [EXT] Re: [PATCH v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
> >
> > Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the
> > message using the 'Report this email' button
> >
> >
> > On Tue, Jun 13, 2023 at 04:34:44PM +0800, Xu Yang wrote:
> > > Convert the binding to DT schema format. Besides, this also add clocks,
> > > '#phy-cells', phy-3p0-supply and power-domains properties which are not
> > > contained in txt file due to txt file lack updates.
> > >
> > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> > >
> > > ---
> > > Changes in v2:
> > >  - change filename to fsl,mxs-usbphy.yaml
> > >  - add other optional properties
> > >  - narrow fsl,anatop to imx6
> > >  - use additionalProperties
> > > Changes in v3:
> > >  - fix indentation
> > >  - add clocks property to example
> > > Changes in v4:
> > >  - remove [fsl,imx7ulp-usbphy, fsl,imx6ul-usbphy]
> > >  - limit item of reg and interrupts to 1
> > >  - sort enum items
> > >  - modify commit message
> > > ---
> > >  .../bindings/phy/fsl,mxs-usbphy.yaml          | 125 ++++++++++++++++++
> > >  .../devicetree/bindings/phy/mxs-usb-phy.txt   |  33 -----
> > >  2 files changed, 125 insertions(+), 33 deletions(-)
> > >  create mode 100644 Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
> >
> > This should be applied by the PHY maintainers, but they weren't Cc'ed.
> 
> I see. Thanks for reminding.
> 
> Hi Vinod,
> 
> Could you please help to apply below two patches:
>     - [v4 1/2] dt-bindings: phy: mxs-usb-phy: convert to DT schema format
>     - [v4,2/2] dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
> The review process has been completed.
> Many thanks in advance.

Applied now, please use get_maintainer.pl to find whom the patches
should be copied to
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
new file mode 100644
index 000000000000..cc9f2bc7e6fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -0,0 +1,125 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS USB Phy Device
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-usbphy
+          - fsl,imx7ulp-usbphy
+          - fsl,vf610-usbphy
+      - items:
+          - enum:
+              - fsl,imx28-usbphy
+              - fsl,imx6ul-usbphy
+              - fsl,imx6sl-usbphy
+              - fsl,imx6sx-usbphy
+              - fsl,imx6q-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - const: fsl,imx6sll-usbphy
+          - const: fsl,imx6ul-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - const: fsl,imx8dxl-usbphy
+          - const: fsl,imx7ulp-usbphy
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  fsl,anatop:
+    description:
+      phandle for anatop register, it is only for imx6 SoC series.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  phy-3p0-supply:
+    description:
+      One of USB PHY's power supply. Can be used to keep a good signal
+      quality.
+
+  fsl,tx-cal-45-dn-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DN output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-cal-45-dp-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DP output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-d-cal:
+    description:
+      Current trimming value (as a percentage) of the 17.78 mA TX
+      reference current.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 79
+    maximum: 119
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - enum:
+                - fsl,imx6q-usbphy
+                - fsl,imx6sl-usbphy
+                - fsl,imx6sx-usbphy
+                - fsl,imx6sll-usbphy
+                - fsl,vf610-usbphy
+            - items:
+                - const: fsl,imx6ul-usbphy
+                - const: fsl,imx23-usbphy
+    then:
+      required:
+        - fsl,anatop
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usbphy1: usb-phy@20c9000 {
+        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+        reg = <0x020c9000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,anatop = <&anatop>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
deleted file mode 100644
index 70c813b0755f..000000000000
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ /dev/null
@@ -1,33 +0,0 @@ 
-* Freescale MXS USB Phy Device
-
-Required properties:
-- compatible: should contain:
-	* "fsl,imx23-usbphy" for imx23 and imx28
-	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
-	* "fsl,imx6sl-usbphy" for imx6sl
-	* "fsl,vf610-usbphy" for Vybrid vf610
-	* "fsl,imx6sx-usbphy" for imx6sx
-	* "fsl,imx7ulp-usbphy" for imx7ulp
-	* "fsl,imx8dxl-usbphy" for imx8dxl
-  "fsl,imx23-usbphy" is still a fallback for other strings
-- reg: Should contain registers location and length
-- interrupts: Should contain phy interrupt
-- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
-
-Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
-  high-speed trimming resistor connected in parallel with the 45 ohm resistor
-  that terminates the DP output signal. Default: 45
-- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
-  the 17.78mA TX reference current. Default: 100
-
-Example:
-usbphy1: usb-phy@20c9000 {
-	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
-	reg = <0x020c9000 0x1000>;
-	interrupts = <0 44 0x04>;
-	fsl,anatop = <&anatop>;
-};