| Message ID | 20230621175046.61521-2-alexeymin@postmarketos.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v2,1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible | expand |
On 21.06.2023 19:50, Alexey Minnekhanov wrote: > Snapdragon 630/660 modem subsystem is similar to one in MSM8998 > and can almost reuse it's reset sequence. > > Downstream sources call this q6v5 version "qdsp6v62-1-5" and its > code path has additional checks for QDSP6v55_BHS_EN_REST_ACK > status [2]. > > Inspiration is taken from Konrad Dybcio's work in [1], but reworked > to use common code path with MSM8996/8998, instead of completely > separate "if" block for SDM660. > > [1] https://github.com/SoMainline/linux/commit/7dd6dd9b936dc8d6c1f1abe299e5b065c33741e8 > [2] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/lavender-q-oss/drivers/soc/qcom/pil-q6v5.c#L393 > > Co-developed-by: Konrad Dybcio <konradybcio@gmail.com> > Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> > Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> > > --- > > V2: use readl_relaxed_poll_timeout instead of hand-coded for loop. > > In his commit Konrad mentions that modem was unstable, but I don't > observe such behaviour on my device. Modem does not restart by itself, > and I could successfully enable ath10k wcn3990 Wi-Fi with this. > > Also worth saying that in my initial tests just using qcom,msm8998-mss-pil > as-is, without separate resource struct and separate code paths for > SDM660, was also working fine. > --- Looks like pre-SMxxxx Sony devices have some touchy watchdog.. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > drivers/remoteproc/qcom_q6v5_mss.c | 51 ++++++++++++++++++++++++++++-- > 1 file changed, 49 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c > index 8e15e4f85de1..dcbecae675e2 100644 > --- a/drivers/remoteproc/qcom_q6v5_mss.c > +++ b/drivers/remoteproc/qcom_q6v5_mss.c > @@ -71,6 +71,7 @@ > #define QDSP6SS_MEM_PWR_CTL 0x0B0 > #define QDSP6V6SS_MEM_PWR_CTL 0x034 > #define QDSP6SS_STRAP_ACC 0x110 > +#define QDSP6V62SS_BHS_STATUS 0x0C4 > > /* AXI Halt Register Offsets */ > #define AXI_HALTREQ_REG 0x0 > @@ -123,6 +124,7 @@ > #define QDSP6v56_CLAMP_QMC_MEM BIT(22) > #define QDSP6SS_XO_CBCR 0x0038 > #define QDSP6SS_ACC_OVERRIDE_VAL 0x20 > +#define QDSP6v55_BHS_EN_REST_ACK BIT(0) > > /* QDSP6v65 parameters */ > #define QDSP6SS_CORE_CBCR 0x20 > @@ -130,6 +132,7 @@ > #define QDSP6SS_BOOT_CORE_START 0x400 > #define QDSP6SS_BOOT_CMD 0x404 > #define BOOT_FSM_TIMEOUT 10000 > +#define BHS_CHECK_MAX_LOOPS 200 > > struct reg_info { > struct regulator *reg; > @@ -250,6 +253,7 @@ enum { > MSS_MSM8998, > MSS_SC7180, > MSS_SC7280, > + MSS_SDM660, > MSS_SDM845, > }; > > @@ -700,7 +704,8 @@ static int q6v5proc_reset(struct q6v5 *qproc) > } else if (qproc->version == MSS_MSM8909 || > qproc->version == MSS_MSM8953 || > qproc->version == MSS_MSM8996 || > - qproc->version == MSS_MSM8998) { > + qproc->version == MSS_MSM8998 || > + qproc->version == MSS_SDM660) { > > if (qproc->version != MSS_MSM8909 && > qproc->version != MSS_MSM8953) > @@ -734,6 +739,16 @@ static int q6v5proc_reset(struct q6v5 *qproc) > val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); > udelay(1); > > + if (qproc->version == MSS_SDM660) { > + ret = readl_relaxed_poll_timeout(qproc->reg_base + QDSP6V62SS_BHS_STATUS, > + i, (i & QDSP6v55_BHS_EN_REST_ACK), > + 1, BHS_CHECK_MAX_LOOPS); > + if (ret == -ETIMEDOUT) { > + dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n"); > + return -ETIMEDOUT; > + } > + } > + > /* Put LDO in bypass mode */ > val |= QDSP6v56_LDO_BYP; > writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); > @@ -756,7 +771,7 @@ static int q6v5proc_reset(struct q6v5 *qproc) > mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL; > i = 19; > } else { > - /* MSS_MSM8998 */ > + /* MSS_MSM8998, MSS_SDM660 */ > mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL; > i = 28; > } > @@ -2193,6 +2208,37 @@ static const struct rproc_hexagon_res sc7280_mss = { > .version = MSS_SC7280, > }; > > +static const struct rproc_hexagon_res sdm660_mss = { > + .hexagon_mba_image = "mba.mbn", > + .proxy_clk_names = (char*[]){ > + "xo", > + "qdss", > + "mem", > + NULL > + }, > + .active_clk_names = (char*[]){ > + "iface", > + "bus", > + "gpll0_mss", > + "mnoc_axi", > + "snoc_axi", > + NULL > + }, > + .proxy_pd_names = (char*[]){ > + "cx", > + "mx", > + NULL > + }, > + .need_mem_protection = true, > + .has_alt_reset = false, > + .has_mba_logs = false, > + .has_spare_reg = false, > + .has_qaccept_regs = false, > + .has_ext_cntl_regs = false, > + .has_vq6 = false, > + .version = MSS_SDM660, > +}; > + > static const struct rproc_hexagon_res sdm845_mss = { > .hexagon_mba_image = "mba.mbn", > .proxy_clk_names = (char*[]){ > @@ -2475,6 +2521,7 @@ static const struct of_device_id q6v5_of_match[] = { > { .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss}, > { .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss}, > { .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss}, > + { .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss}, > { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss}, > { }, > };
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 8e15e4f85de1..dcbecae675e2 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -71,6 +71,7 @@ #define QDSP6SS_MEM_PWR_CTL 0x0B0 #define QDSP6V6SS_MEM_PWR_CTL 0x034 #define QDSP6SS_STRAP_ACC 0x110 +#define QDSP6V62SS_BHS_STATUS 0x0C4 /* AXI Halt Register Offsets */ #define AXI_HALTREQ_REG 0x0 @@ -123,6 +124,7 @@ #define QDSP6v56_CLAMP_QMC_MEM BIT(22) #define QDSP6SS_XO_CBCR 0x0038 #define QDSP6SS_ACC_OVERRIDE_VAL 0x20 +#define QDSP6v55_BHS_EN_REST_ACK BIT(0) /* QDSP6v65 parameters */ #define QDSP6SS_CORE_CBCR 0x20 @@ -130,6 +132,7 @@ #define QDSP6SS_BOOT_CORE_START 0x400 #define QDSP6SS_BOOT_CMD 0x404 #define BOOT_FSM_TIMEOUT 10000 +#define BHS_CHECK_MAX_LOOPS 200 struct reg_info { struct regulator *reg; @@ -250,6 +253,7 @@ enum { MSS_MSM8998, MSS_SC7180, MSS_SC7280, + MSS_SDM660, MSS_SDM845, }; @@ -700,7 +704,8 @@ static int q6v5proc_reset(struct q6v5 *qproc) } else if (qproc->version == MSS_MSM8909 || qproc->version == MSS_MSM8953 || qproc->version == MSS_MSM8996 || - qproc->version == MSS_MSM8998) { + qproc->version == MSS_MSM8998 || + qproc->version == MSS_SDM660) { if (qproc->version != MSS_MSM8909 && qproc->version != MSS_MSM8953) @@ -734,6 +739,16 @@ static int q6v5proc_reset(struct q6v5 *qproc) val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); udelay(1); + if (qproc->version == MSS_SDM660) { + ret = readl_relaxed_poll_timeout(qproc->reg_base + QDSP6V62SS_BHS_STATUS, + i, (i & QDSP6v55_BHS_EN_REST_ACK), + 1, BHS_CHECK_MAX_LOOPS); + if (ret == -ETIMEDOUT) { + dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n"); + return -ETIMEDOUT; + } + } + /* Put LDO in bypass mode */ val |= QDSP6v56_LDO_BYP; writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); @@ -756,7 +771,7 @@ static int q6v5proc_reset(struct q6v5 *qproc) mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL; i = 19; } else { - /* MSS_MSM8998 */ + /* MSS_MSM8998, MSS_SDM660 */ mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL; i = 28; } @@ -2193,6 +2208,37 @@ static const struct rproc_hexagon_res sc7280_mss = { .version = MSS_SC7280, }; +static const struct rproc_hexagon_res sdm660_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + "qdss", + "mem", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "bus", + "gpll0_mss", + "mnoc_axi", + "snoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mx", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_SDM660, +}; + static const struct rproc_hexagon_res sdm845_mss = { .hexagon_mba_image = "mba.mbn", .proxy_clk_names = (char*[]){ @@ -2475,6 +2521,7 @@ static const struct of_device_id q6v5_of_match[] = { { .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss}, { .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss}, { .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss}, + { .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss}, { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss}, { }, };