diff mbox series

[v7,4/4] fpga: add configuration for the FPGA KUnit test suites.

Message ID 20230616154405.220502-5-marpagan@redhat.com (mailing list archive)
State New
Headers show
Series fpga: add initial KUnit tests for the subsystem | expand

Commit Message

Marco Pagani June 16, 2023, 3:44 p.m. UTC
Add configuration for the KUnit test suites for the core components
of the FPGA subsystem.

Signed-off-by: Marco Pagani <marpagan@redhat.com>
---
 drivers/fpga/Kconfig            |  2 ++
 drivers/fpga/Makefile           |  3 +++
 drivers/fpga/tests/.kunitconfig |  5 +++++
 drivers/fpga/tests/Kconfig      | 11 +++++++++++
 drivers/fpga/tests/Makefile     |  5 +++++
 5 files changed, 26 insertions(+)
 create mode 100644 drivers/fpga/tests/.kunitconfig
 create mode 100644 drivers/fpga/tests/Kconfig
 create mode 100644 drivers/fpga/tests/Makefile

Comments

Xu Yilun June 25, 2023, 8:23 a.m. UTC | #1
On 2023-06-16 at 17:44:05 +0200, Marco Pagani wrote:
> Add configuration for the KUnit test suites for the core components
> of the FPGA subsystem.
> 
> Signed-off-by: Marco Pagani <marpagan@redhat.com>
> ---
>  drivers/fpga/Kconfig            |  2 ++
>  drivers/fpga/Makefile           |  3 +++
>  drivers/fpga/tests/.kunitconfig |  5 +++++
>  drivers/fpga/tests/Kconfig      | 11 +++++++++++
>  drivers/fpga/tests/Makefile     |  5 +++++
>  5 files changed, 26 insertions(+)
>  create mode 100644 drivers/fpga/tests/.kunitconfig
>  create mode 100644 drivers/fpga/tests/Kconfig
>  create mode 100644 drivers/fpga/tests/Makefile
> 
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 0a00763b9f28..2f689ac4ba3a 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI
>  	  FPGA manager driver support for Lattice FPGAs programming over slave
>  	  SPI sysCONFIG interface.
>  
> +source "drivers/fpga/tests/Kconfig"
> +
>  endif # FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 72e554b4d2f7..352a2612623e 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
>  
>  # Drivers for FPGAs which implement DFL
>  obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
> +
> +# KUnit tests
> +obj-$(CONFIG_FPGA_KUNIT_TESTS)		+= tests/
> diff --git a/drivers/fpga/tests/.kunitconfig b/drivers/fpga/tests/.kunitconfig
> new file mode 100644
> index 000000000000..a1c2a2974c39
> --- /dev/null
> +++ b/drivers/fpga/tests/.kunitconfig
> @@ -0,0 +1,5 @@
> +CONFIG_KUNIT=y
> +CONFIG_FPGA=y
> +CONFIG_FPGA_REGION=y
> +CONFIG_FPGA_BRIDGE=y
> +CONFIG_FPGA_KUNIT_TESTS=y
> diff --git a/drivers/fpga/tests/Kconfig b/drivers/fpga/tests/Kconfig
> new file mode 100644
> index 000000000000..e4a64815f16d
> --- /dev/null
> +++ b/drivers/fpga/tests/Kconfig
> @@ -0,0 +1,11 @@
> +config FPGA_KUNIT_TESTS
> +	tristate "KUnit test for the FPGA subsystem" if !KUNIT_ALL_TESTS
> +	depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT=y

Why KUNIT shouldn't be 'm'

> +	default KUNIT_ALL_TESTS
> +        help
> +          This builds unit tests for the FPGA subsystem
> +
> +          For more information on KUnit and unit tests in general,
> +          please refer to the KUnit documentation in Documentation/dev-tools/kunit/.
> +
> +          If unsure, say N.
> diff --git a/drivers/fpga/tests/Makefile b/drivers/fpga/tests/Makefile
> new file mode 100644
> index 000000000000..faa5fa230ab0
> --- /dev/null
> +++ b/drivers/fpga/tests/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-mgr-test.o
> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-bridge-test.o
> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-region-test.o

Could be integrated in one line?

Thanks,
Yilun

> -- 
> 2.40.1
>
Marco Pagani June 27, 2023, 4:19 p.m. UTC | #2
On 2023-06-25 10:23, Xu Yilun wrote:
> On 2023-06-16 at 17:44:05 +0200, Marco Pagani wrote:
>> Add configuration for the KUnit test suites for the core components
>> of the FPGA subsystem.
>>
>> Signed-off-by: Marco Pagani <marpagan@redhat.com>
>> ---
>>  drivers/fpga/Kconfig            |  2 ++
>>  drivers/fpga/Makefile           |  3 +++
>>  drivers/fpga/tests/.kunitconfig |  5 +++++
>>  drivers/fpga/tests/Kconfig      | 11 +++++++++++
>>  drivers/fpga/tests/Makefile     |  5 +++++
>>  5 files changed, 26 insertions(+)
>>  create mode 100644 drivers/fpga/tests/.kunitconfig
>>  create mode 100644 drivers/fpga/tests/Kconfig
>>  create mode 100644 drivers/fpga/tests/Makefile
>>
>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
>> index 0a00763b9f28..2f689ac4ba3a 100644
>> --- a/drivers/fpga/Kconfig
>> +++ b/drivers/fpga/Kconfig
>> @@ -276,4 +276,6 @@ config FPGA_MGR_LATTICE_SYSCONFIG_SPI
>>  	  FPGA manager driver support for Lattice FPGAs programming over slave
>>  	  SPI sysCONFIG interface.
>>  
>> +source "drivers/fpga/tests/Kconfig"
>> +
>>  endif # FPGA
>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
>> index 72e554b4d2f7..352a2612623e 100644
>> --- a/drivers/fpga/Makefile
>> +++ b/drivers/fpga/Makefile
>> @@ -55,3 +55,6 @@ obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
>>  
>>  # Drivers for FPGAs which implement DFL
>>  obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
>> +
>> +# KUnit tests
>> +obj-$(CONFIG_FPGA_KUNIT_TESTS)		+= tests/
>> diff --git a/drivers/fpga/tests/.kunitconfig b/drivers/fpga/tests/.kunitconfig
>> new file mode 100644
>> index 000000000000..a1c2a2974c39
>> --- /dev/null
>> +++ b/drivers/fpga/tests/.kunitconfig
>> @@ -0,0 +1,5 @@
>> +CONFIG_KUNIT=y
>> +CONFIG_FPGA=y
>> +CONFIG_FPGA_REGION=y
>> +CONFIG_FPGA_BRIDGE=y
>> +CONFIG_FPGA_KUNIT_TESTS=y
>> diff --git a/drivers/fpga/tests/Kconfig b/drivers/fpga/tests/Kconfig
>> new file mode 100644
>> index 000000000000..e4a64815f16d
>> --- /dev/null
>> +++ b/drivers/fpga/tests/Kconfig
>> @@ -0,0 +1,11 @@
>> +config FPGA_KUNIT_TESTS
>> +	tristate "KUnit test for the FPGA subsystem" if !KUNIT_ALL_TESTS
>> +	depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT=y
> 
> Why KUNIT shouldn't be 'm'
>

The "running tips" section of KUnit documentation suggests that tests should
ideally depend on KUNIT=y in their Kconfigs because some features will not work
when KUNIT=m


>> +	default KUNIT_ALL_TESTS
>> +        help
>> +          This builds unit tests for the FPGA subsystem
>> +
>> +          For more information on KUnit and unit tests in general,
>> +          please refer to the KUnit documentation in Documentation/dev-tools/kunit/.
>> +
>> +          If unsure, say N.
>> diff --git a/drivers/fpga/tests/Makefile b/drivers/fpga/tests/Makefile
>> new file mode 100644
>> index 000000000000..faa5fa230ab0
>> --- /dev/null
>> +++ b/drivers/fpga/tests/Makefile
>> @@ -0,0 +1,5 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +
>> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-mgr-test.o
>> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-bridge-test.o
>> +obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-region-test.o
> 
> Could be integrated in one line?

Yes.

> 
> Thanks,
> Yilun
> 
>> -- 
>> 2.40.1
>>
>
diff mbox series

Patch

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 0a00763b9f28..2f689ac4ba3a 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -276,4 +276,6 @@  config FPGA_MGR_LATTICE_SYSCONFIG_SPI
 	  FPGA manager driver support for Lattice FPGAs programming over slave
 	  SPI sysCONFIG interface.
 
+source "drivers/fpga/tests/Kconfig"
+
 endif # FPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 72e554b4d2f7..352a2612623e 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -55,3 +55,6 @@  obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
 
 # Drivers for FPGAs which implement DFL
 obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
+
+# KUnit tests
+obj-$(CONFIG_FPGA_KUNIT_TESTS)		+= tests/
diff --git a/drivers/fpga/tests/.kunitconfig b/drivers/fpga/tests/.kunitconfig
new file mode 100644
index 000000000000..a1c2a2974c39
--- /dev/null
+++ b/drivers/fpga/tests/.kunitconfig
@@ -0,0 +1,5 @@ 
+CONFIG_KUNIT=y
+CONFIG_FPGA=y
+CONFIG_FPGA_REGION=y
+CONFIG_FPGA_BRIDGE=y
+CONFIG_FPGA_KUNIT_TESTS=y
diff --git a/drivers/fpga/tests/Kconfig b/drivers/fpga/tests/Kconfig
new file mode 100644
index 000000000000..e4a64815f16d
--- /dev/null
+++ b/drivers/fpga/tests/Kconfig
@@ -0,0 +1,11 @@ 
+config FPGA_KUNIT_TESTS
+	tristate "KUnit test for the FPGA subsystem" if !KUNIT_ALL_TESTS
+	depends on FPGA && FPGA_REGION && FPGA_BRIDGE && KUNIT=y
+	default KUNIT_ALL_TESTS
+        help
+          This builds unit tests for the FPGA subsystem
+
+          For more information on KUnit and unit tests in general,
+          please refer to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+          If unsure, say N.
diff --git a/drivers/fpga/tests/Makefile b/drivers/fpga/tests/Makefile
new file mode 100644
index 000000000000..faa5fa230ab0
--- /dev/null
+++ b/drivers/fpga/tests/Makefile
@@ -0,0 +1,5 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-mgr-test.o
+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-bridge-test.o
+obj-$(CONFIG_FPGA_KUNIT_TESTS) += fpga-region-test.o