| Message ID | 20230627-sm6125-dpu-v2-7-03e430a2078c@somainline.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drm/msm: Add SM6125 MDSS/DPU hardware and enable Sony Xperia 10 II panel | expand |
On Tue, 27 Jun 2023 22:14:22 +0200, Marijn Suijten wrote: > Document the SM6125 MDSS. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > .../bindings/display/msm/qcom,sm6125-mdss.yaml | 217 +++++++++++++++++++++ > 1 file changed, 217 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.example.dtb: dsi@5e94000: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,sm6125-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long 'qcom,sm6125-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm6115-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl'] 'qcom,sm6125-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl'] from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230627-sm6125-dpu-v2-7-03e430a2078c@somainline.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Tue, Jun 27, 2023 at 10:14:22PM +0200, Marijn Suijten wrote: > Document the SM6125 MDSS. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > .../bindings/display/msm/qcom,sm6125-mdss.yaml | 217 +++++++++++++++++++++ > 1 file changed, 217 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > new file mode 100644 > index 000000000000..2525482424cb > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > @@ -0,0 +1,217 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM6125 Display MDSS > + > +maintainers: > + - Marijn Suijten <marijn.suijten@somainline.org> > + > +description: > + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks > + like DPU display controller, DSI and DP interfaces etc. > + > +$ref: /schemas/display/msm/mdss-common.yaml# > + > +properties: > + compatible: > + const: qcom,sm6125-mdss > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display AHB clock > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: ahb > + - const: core > + > + iommus: > + maxItems: 1 > + > + interconnects: > + maxItems: 2 > + > + interconnect-names: > + maxItems: 2 > + > +patternProperties: > + "^display-controller@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,sm6125-dpu > + > + "^dsi@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + items: > + - const: qcom,sm6125-dsi-ctrl > + - const: qcom,mdss-dsi-ctrl > + > + "^phy@[0-9a-f]+$": > + type: object > + properties: > + compatible: > + const: qcom,sm6125-dsi-phy-14nm > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> > + #include <dt-bindings/clock/qcom,gcc-sm6125.h> > + #include <dt-bindings/clock/qcom,rpmcc.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-subsystem@5e00000 { > + compatible = "qcom,sm6125-mdss"; > + reg = <0x05e00000 0x1000>; > + reg-names = "mdss"; > + > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + > + power-domains = <&dispcc MDSS_GDSC>; > + > + iommus = <&apps_smmu 0x400 0x0>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + status = "disabled"; Examples should not be disabled. Drop. > + > + display-controller@5e01000 { > + compatible = "qcom,sm6125-dpu"; > + reg = <0x05e01000 0x83208>, > + <0x05eb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "iface", > + "rot", > + "lut", > + "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <19200000>; > + > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&mdss_dsi0_in>; > + }; > + }; > + }; > + }; > + > + dsi@5e94000 { > + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; > + reg = <0x05e94000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; > + > + operating-points-v2 = <&dsi_opp_table>; > + power-domains = <&rpmpd SM6125_VDDCX>; > + > + phys = <&mdss_dsi0_phy>; > + phy-names = "dsi"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; Ditto. > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + mdss_dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + mdss_dsi0_out: endpoint { > + }; > + }; > + }; > + }; > + > + phy@5e94400 { > + compatible = "qcom,sm6125-dsi-phy-14nm"; > + reg = <0x05e94400 0x100>, > + <0x05e94500 0x300>, > + <0x05e94800 0x188>; > + reg-names = "dsi_phy", > + "dsi_phy_lane", > + "dsi_pll"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "iface", > + "ref"; > + > + required-opps = <&rpmpd_opp_svs>; > + power-domains = <&rpmpd SM6125_VDDMX>; > + > + status = "disabled"; Ditto > + }; > + }; > +... > > -- > 2.41.0 >
On 2023-06-28 09:30:51, Rob Herring wrote: > On Tue, Jun 27, 2023 at 10:14:22PM +0200, Marijn Suijten wrote: > > Document the SM6125 MDSS. > > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > > --- > > .../bindings/display/msm/qcom,sm6125-mdss.yaml | 217 +++++++++++++++++++++ > > 1 file changed, 217 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > > new file mode 100644 > > index 000000000000..2525482424cb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml > > @@ -0,0 +1,217 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm SM6125 Display MDSS > > + > > +maintainers: > > + - Marijn Suijten <marijn.suijten@somainline.org> > > + > > +description: > > + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks > > + like DPU display controller, DSI and DP interfaces etc. > > + > > +$ref: /schemas/display/msm/mdss-common.yaml# > > + > > +properties: > > + compatible: > > + const: qcom,sm6125-mdss > > + > > + clocks: > > + items: > > + - description: Display AHB clock from gcc > > + - description: Display AHB clock > > + - description: Display core clock > > + > > + clock-names: > > + items: > > + - const: iface > > + - const: ahb > > + - const: core > > + > > + iommus: > > + maxItems: 1 > > + > > + interconnects: > > + maxItems: 2 > > + > > + interconnect-names: > > + maxItems: 2 > > + > > +patternProperties: > > + "^display-controller@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + const: qcom,sm6125-dpu > > + > > + "^dsi@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + items: > > + - const: qcom,sm6125-dsi-ctrl > > + - const: qcom,mdss-dsi-ctrl > > + > > + "^phy@[0-9a-f]+$": > > + type: object > > + properties: > > + compatible: > > + const: qcom,sm6125-dsi-phy-14nm > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> > > + #include <dt-bindings/clock/qcom,gcc-sm6125.h> > > + #include <dt-bindings/clock/qcom,rpmcc.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/power/qcom-rpmpd.h> > > + > > + display-subsystem@5e00000 { > > + compatible = "qcom,sm6125-mdss"; > > + reg = <0x05e00000 0x1000>; > > + reg-names = "mdss"; > > + > > + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + > > + clocks = <&gcc GCC_DISP_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > > + clock-names = "iface", > > + "ahb", > > + "core"; > > + > > + power-domains = <&dispcc MDSS_GDSC>; > > + > > + iommus = <&apps_smmu 0x400 0x0>; > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + status = "disabled"; > > Examples should not be disabled. Drop. Thanks, I think I missed this in the diff when importing the updated DT bindings into this example. Will drop for v3 pending other comments. More importantly, why is your bot complaining the following about this example: ['qcom,sm6125-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long ... 'qcom,sm6125-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl'] This is patch 07/15, but that compatible was already added in 05/15. - Marijn > > + > > + display-controller@5e01000 { > > + compatible = "qcom,sm6125-dpu"; > > + reg = <0x05e01000 0x83208>, > > + <0x05eb0000 0x2008>; > > + reg-names = "mdp", "vbif"; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <0>; > > + > > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > > + clock-names = "bus", > > + "iface", > > + "rot", > > + "lut", > > + "core", > > + "vsync"; > > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > > + assigned-clock-rates = <19200000>; > > + > > + operating-points-v2 = <&mdp_opp_table>; > > + power-domains = <&rpmpd SM6125_VDDCX>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dpu_intf1_out: endpoint { > > + remote-endpoint = <&mdss_dsi0_in>; > > + }; > > + }; > > + }; > > + }; > > + > > + dsi@5e94000 { > > + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; > > + reg = <0x05e94000 0x400>; > > + reg-names = "dsi_ctrl"; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <4>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&gcc GCC_DISP_HF_AXI_CLK>; > > + clock-names = "byte", > > + "byte_intf", > > + "pixel", > > + "core", > > + "iface", > > + "bus"; > > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > > + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; > > + > > + operating-points-v2 = <&dsi_opp_table>; > > + power-domains = <&rpmpd SM6125_VDDCX>; > > + > > + phys = <&mdss_dsi0_phy>; > > + phy-names = "dsi"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + status = "disabled"; > > Ditto. > > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + mdss_dsi0_in: endpoint { > > + remote-endpoint = <&dpu_intf1_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + mdss_dsi0_out: endpoint { > > + }; > > + }; > > + }; > > + }; > > + > > + phy@5e94400 { > > + compatible = "qcom,sm6125-dsi-phy-14nm"; > > + reg = <0x05e94400 0x100>, > > + <0x05e94500 0x300>, > > + <0x05e94800 0x188>; > > + reg-names = "dsi_phy", > > + "dsi_phy_lane", > > + "dsi_pll"; > > + > > + #clock-cells = <1>; > > + #phy-cells = <0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > > + clock-names = "iface", > > + "ref"; > > + > > + required-opps = <&rpmpd_opp_svs>; > > + power-domains = <&rpmpd SM6125_VDDMX>; > > + > > + status = "disabled"; > > Ditto > > > + }; > > + }; > > +... > > > > -- > > 2.41.0 > >
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml new file mode 100644 index 000000000000..2525482424cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6125 Display MDSS + +maintainers: + - Marijn Suijten <marijn.suijten@somainline.org> + +description: + SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks + like DPU display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sm6125-mdss + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + maxItems: 2 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dpu + + "^dsi@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - const: qcom,sm6125-dsi-ctrl + - const: qcom,mdss-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + properties: + compatible: + const: qcom,sm6125-dsi-phy-14nm + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sm6125.h> + #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@5e00000 { + compatible = "qcom,sm6125-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x400 0x0>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + display-controller@5e01000 { + compatible = "qcom,sm6125-dpu"; + reg = <0x05e01000 0x83208>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + }; + + dsi@5e94000 { + compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x05e94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SM6125_VDDCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + phy@5e94400 { + compatible = "qcom,sm6125-dsi-phy-14nm"; + reg = <0x05e94400 0x100>, + <0x05e94500 0x300>, + <0x05e94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + required-opps = <&rpmpd_opp_svs>; + power-domains = <&rpmpd SM6125_VDDMX>; + + status = "disabled"; + }; + }; +...